N2KEXT-2RD 2' NMEA 2000 Cable 2' NMEA 2000 Cable

N2KEXT-15RD 15' NMEA 2000 Cable 15' NMEA 2000 Cable

N2KEXT-6RD 6' NMEA 2000 Cable 6' NMEA 2000 Cable

WS2-C06 NMEA 2000 Cable for Heading Sensor Weather With NMEA 2000 output only. End in a standard male 5-Pin NMEA 2000 connector 6M cable. 6M/20' This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

NMEA 2000 Cable - 6M Features: Length: 6M NMEA 2000 Cable

NMEA 2000 right angle cable WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

NMEA 2000 Cable & T Connector Connection Kit for Siren 3 Pro Optimize the connectivity of your Connected Boat® system, allowing you to monitor engine data, water, fuel and waste tanks, and more! The NMEA 2000 Connection Kit includes a 2-meter connection cable and a 3-Way Connection "T" – everything you'll need to hook up to the NMEA 2000 data system 'backbone'.  *Compatible with the Siren 3 Pro Only

NavLink 2  “NavLink 2 is an easy to fit NMEA 2000 to Wifi server designed to make NMEA 2000 navigation data available for apps on smartphones, tablets, iPads and PCs.” Features: NavLink 2 is an easy to fit NMEA 2000 to Wifi server designed so that NMEA 2000 navigation data can be made available for apps on smartphones, tablets, iPads and PCs. Installation takes seconds as a result of direction connection to the NMEA 2000 back bone and self-powered from the data network. Once installed, it creates a local WiFi network for devices to connect or can be programmed to join an existing wireless network if one is already installed.  This is ideal for devices like the Furuno wireless radar which require operation through their own dedicated network but require NMEA 2000 data integration for charting apps. NavLink 2 now works with the popular Navionics Boating App for Apple iOS and Android. Therefore allowing display of GPS and AIS data on your Navionics charts.  Specifications: NMEA 2000 to WiFi server Self powered from NMEA 2000 bus – fits in seconds Supports TCP/IP and UDP connection modes Provides AIS, navigation and instrument data to apps Compatible with all popular apps like iNavX, TimeZero, Weather 4D, Navionics, SailGrib, NavLink, iSailor, SeaPilot, AquaMap etc Up to 7 connected devices Compatible with Windows, Linux, MAC OS, iOS and Android Easy web interface for programming Password protected Can act as dedicated wireless server or rather can connect to an existing wireless network Diagnostic data display mode and LED status lights Internal hi gain WiFi antenna Super-fast 230KBs operation Optional raw data mode for developers and likewise advanced users Supplied with NMEA 2000 cable

SeaTalk 2 / NMEA 2000 Interface Cable (1.5m) Interface cable for connecting E-Series displays to Raymarine SeaTalk 2 or 3rd party NMEA 2000 Devices. Twist-lock connector at the E-series display end, and a standard 5-pin waterproof SeaTalk 2 style connector at the other.

Lowrance Outboard Cable-Steer Pilot Pack Everything you need in one box to fit an autopilot to your outboard motor, the Outboard Pilot lets you focus on fishing activity while keeping the boat on course. When connected to a Lowrance HDS Gen2 or Gen2 Touch, the Outboard Pilot can steer to a waypoint or along a route, select a turn pattern or simply hold a constant heading. The Lowrance SmartSteer™ user interface allows you to easily switch between electric-steer, trolling-motor control and outboard motor control directly from your HDS display. And, with your HDS display, you can easily convert trails to routes - so you can retrace a previous track and get your boat back to the dock from your fishing area. HDS Units require 3.5 Software Steer your outboard motor to a heading, waypoint, route or cursor, with control from your HDS Gen2 or Gen2 Touch display Lowrance SmartSteer™ interface provides control of your cable-steered outboard motor, as well as the MotorGuide Xi5 Pinpoint electric-steer trolling motor "One-touch" route creation from trails Pre-set turn patterns for more effective fishing/trolling presentations Recommended for single-outboard setups, on boats that are 30 feet and less, in length VRF (Virtual Rudder Feedback).simplifies pilot installation eliminating the need for a rudder position sensor Easy setup.straightforward guide steps you through first-time install Easy-to-install, plug-and-socket connection with no complex terminal wiring Supported by Lowrance Advantage Service program Dash-mount button for one-touch Auto/Standby activation Steer to Heading, Course or Route High efficiency, super-quiet 0.8L hydraulic gear pump Lowrance Outboard Pilot Cable-Steer Pack replaces the manual helm-drive unit Morse 290, Morse 304411 and Teleflex SSC52 cable compatibility Helm-1 is only compatible with the NAC-1.Helm-1 includes variable-voltage feedback interface 2 Year Limited Warranty Package Includes: NAC-1 Autopilot Computer - 000-11769-001 The brains behind the Lowrance Outboard Pilot system. It contains the steering computer and electronics for the drive unit motor and clutch. Helm-1 for Outboard Pilot - 000-11771-001 This drive unit replaces your manual helm-drive unit on single cable installations. Compatible with Morse 290, 304411 and Teleflex SSC52 cables. Includes voltage rudder-feedback sensor, and is only compatible with NAC-1. N2K 4 Way - 000-10996-001 NMEA2000 4-way joiner. Connect four NMEA2000 Micro-C devices to the NMEA2000 Network. N2KEXT-2RD - 000-0119-88 0.6M (2') NMEA 2000® cable for backbone extension or or drop cable to connect an additional network device N2KEXT-6RD - 000-0127-53 1.82M (6') NMEA 2000® cable for backbone extension or drop cable to connect an additional network device N2KEXT-15RD - 000-0119-86 4.55M (15') NMEA 2000® cable for backbone extension or or drop cable to connect an additional network device TR-120-KIT - 000-0127-52 Set of 1 male and 1 female NMEA 2000® terminators MICRO-C POWER CABLE ONLY - NO T CONN - 000-12202-001

Point-1 GPS/HDG Antenna Module The Lowrance Point-1 is the ideal position and heading device. The Point-1 provides extremely accurate and rapid boat position and speed updates. In addition – unlike other position-only antennas – the Point-1 provides heading for accurate boat direction at any speed and for radar/chart overlay. The Point-1 easily connects to any HDS Gen2, HDS Gen2 Touch or Elite-7 display or any NMEA 2000 network. It is fully waterproof and can be pole or surface mounted on any boat. Key Features: NMEA 2000® position and heading sensor Supports GPS and GLONASS, Galileo-capable with future software update Supports SBAS including WAAS/EGNOS/MSAS 10Hz updates for smooth and accurate location Integrated electronic compass provides 10Hz heading for chart stabilization and radar overlay, plus accurate course over ground even at low speeds Compact, rugged design for all marine environments and fully waterproof Includes spat/pole mount Not recommended for use with MARPA or Autopilot Comes With: Antenna N2K-T-RD, Micro-C T-Connector 000-0119-79 N2KEXT-15RD 4.5M Micro-C Cable 000-0119-86

NMEA Starter Kit Network starter kit. Includes 2 terminating resistors (TR-120M-RD, TR-120F-RD), two T-connectors (N2K-T-RD), one 2 ft extension cable (N2KEXT-2RD), and one 15 ft extension cable (N2KEXT-15RD), and a power node (N2K-PWR-RD). For use with all Red network devices. Compatible With: GlobalMap 5200C, GlobalMap 5300C iGPS, GlobalMap 7200C, GlobalMap 7300C HD, GlobalMap 8200C, GlobalMap 8300C HD, GlobalMap 9200C, GlobalMap 9300C HD, HDS-10, HDS-10m, HDS-5, HDS-5m, HDS-5x, HDS-7, HDS-7m, HDS-8, HDS-8m, LCX-112C, LCX-113C HD, LCX-37C, LCX-38C HD, LMS-520C, LMS-522C iGPS, LMS-525C DF

Link-9 VHF Radio with DSC & AIS Receiver Features: Lowrance Link-9 Replaces the current Link-8 VHF Front mountable design for easy installation Industrial Design to align with style of Lowrance MFDs Seamless integration with a wider B & G system through NMEA 2000 and 0183 Built-in AIS Receiver Large screen with intuitive user interface Unique Selling Points: GPS 4-Ways: With the integrated GPS receiver the Link-9 now has four ways to ensure you have a GPS fix in the event of an emergency. A GPS antenna in the face of the radio means open air installations don’t need another antenna at all An SMA connector on the rear case allows for connection to a GPS-500 antenna NMEA 0183 allows you to get GPS from a chartplotter NMEA 2000 means you don’t need another antenna if you already have one in your network Built in AIS: A dual-channel AIS receiver monitors the position of nearby AIS-equipped vessels, helping you to avoid collisions in crowded harbours and waterways. AIS information can be viewed on the Link-9’s built-in screen, or overlaid on your chart or radar screen through a compatible multifunction display. Remote Mountable Fist Mic: The Link-9’s removable fist mic can be connected to the front or rear of the radio, and optional extension cable allows the radio and mic to be mounted separately. This offers a simple and cost-effective solution for any mounting location, with no cable clutter. For example, the Link-9 can be mounted overhead, with no hanging cables, while the mic is connected to an extension socket on the dash below. Mount From The Front: Link-9 features easily removable top and bottom bezels which reveal mounting holes allowing the same style of mounting from the front that is featured on Lowrance MFDs. Track Buddy: Track buddy is a feature that automatically requests the position of another VHF radio. Simply enter the MMSI of the VHF into your contact list, then start tracking! Track up to 5 buddies Polls your contacts for their Lat/Long position automatically Can be set to 1, 5, 15, 30 or 60 minute intervals Displays the position on a compatible chart plotter Great for keeping track of friends, family or vessels you need to know the position of that don’t have AIS Navigation Mode: Press the NAV button on the Link-9 to turn it into a navigational instrument displaying your Speed and Course. Link-9 also contains a Man Overboard (MOB) function, hold down the NAV/MOB button to drop a waypoint on your current location and the Link-9 will enter MOB mode to show you how far away you are and where you need to steer to get back to the position of the MOB event. The MOB waypoint is also transmitted over NMEA 2000 to the rest of your network.

Lowrance Extension Cable 25' extension cable. For use with LGC-3000 and red NMEA network.

Elite FS™ 7 All-Season Pack Bring the power of Lowrance CHIRP sonar, DownScan Imaging™, and FishReveal™ to the ice, a kayak, or a small boat with the Elite FS 7 All-Season Pack.  The Elite Fishing System (FS) combines the power of Lowrance's proven and newest fishfinding tools with a more affordable display that's easier to use and install. From ActiveTarget™ live sonar and extreme high-resolution Active Imaging™ with Lowrance CHIRP sonar, SideScan, and DownScan Imaging™ to preloaded C-MAP® Contour™+ Fishing Maps, Elite FS gives you all the tools you need to find and catch more fish.  Find More Fish with Proven Lowrance Sonar See structure and cover with a new level of refined detail and at a range unmatched by any other structure imaging technology with Active Imaging™ 3-in-1 sonar featuring CHIRP, SideScan, and DownScan with FishReveal™. Get the best of CHIRP sonar and DownScan Imaging™ on one screen with FishReveal, a Lowrance exclusive that helps you easily recognize fish from the structure and cover on high-detailed DownScan images. Target Fish Live with ActiveTarget™ Live Sonar Fish smarter when you know exactly what fish are doing – in real-time – with ActiveTarget™ Live Sonar. Enjoy high-resolution views of fish movements, tracking them as they swim in and around cover. Watch their real-time response to your lure and you will know if your current technique is working or if it’s time to switch things up. Find Key Fishing Areas with Contour+ Spend more time trying to catch fish and less time trying to find them with the high-resolution detail of C-MAP® Contour+ inland and coastal charts built into Elite FS displays. From finding key fishing areas, like ledges, drop-offs, and ditches to navigating with precision to fish-holding areas, you will have more success on the water with high resolution, bathymetric 1-foot contours on 15,000+ U.S. lakes and 9,400+ lakes in Canada. Features: ActiveTarget™ Live Sonar ready Active Imaging 3-in-1 ready FishReveal™ Preloaded C-MAP® Contour+ inland and coastal charts with high resolution, bathymetric 1-foot contours on 15,000+ U.S. lakes and 9,400+ lakes in Canada Mapping options including C-MAP®, Navionics® and more C-MAP® Easy Routing, Navionics® Autorouting capability C-MAP Genesis Live onscreen mapping High-resolution multi-touch touchscreen Integrated wireless, NMEA 2000®, and Ethernet connectivity Full touchscreen control of Power Pole® anchors and Ghost® Trolling Motor Kit includes: Elite FS 7, carrying bag, HDI skimmer transducer, suction cup mount, ice transducer, mounting platform, power cable, 12V battery, and charger Specifications: Screen Brightness: >1200 nits SD Card Storage: 1 micro SD card up to 32GB Ethernet Ports: 1 virtual ethernet port Warranty Period: 1 Year + 4 additional years of upgrade options totaling 5 years Update rate: 10 Hz GPS: 10 Hz Internal high-sensitivity WAAS + EGNOS + MSAS Shock Vibration: 100,000 cycles of 20 G Compass Safe: 12" (300mm) Supply Voltage: 12v DC (10.8-17VDC) GPS Receiver Channels: 16 NMEA 2000 Connectivity: 1x Micro-C