Clamp Mount Lets you mount your Cannon Sport-Troll, Easi-Troll or Mini-Mag downrigger on the gunwale or transom of your boat. Aluminum mount has a comfortable hand knob with heavy-duty coarse-thread screw that opens 2". This adds portability to your downriggers. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Square Post Clamp Mount for Posts Up to 2.5" Wide The RAM-101U-247-25 consists of a double socket arm, round 2.5" diameter round base with the universal AMPS hole pattern and 2.5" clamp base. The clamp base will wrap around a maximum width of 2.5" and is tightened by screwing the two plates together with the included nuts and bolts. Rubber ball, socket technology dampens shock and vibration, as well as allows for almost infinite adjustment, perfect viewing angles.  Features: Material: Powder Coated Marine Grade Aluminum Ball Size: C Size 1.5" Rubber Ball Note: The "U" in the part number reflects product packaged in poly bag. Weight: 1.55 lbs.

RAM® Square Post Clamp Mount for Posts Up To 3" Wide The RAM-101U-247-3 consists of a double socket arm, round 2.5" diameter round base with the universal AMPS hole pattern and 3" clamp base. The clamp base will wrap around a maximum width of 3" and is tightened by screwing the two plates together with the included nuts and bolts. Rubber ball, socket technology dampens shock and vibration, as well as allows for almost infinite adjustment, perfect viewing angles.  Specifications: Material: Powder Coated Marine Grade Aluminum Ball Size: C Size 1.5" Rubber Ball Note: The "U" in the part number reflects product packaged in poly bag. Weight: 1.8 lbs.

RAM® Square Post Clamp Mount for Posts Up To 2.5" Wide The RAM-101U-247-25 consists of a double socket arm, round 2.5" diameter round base with the universal AMPS hole pattern and 2.5" clamp base. The clamp base will wrap around a maximum width of 2.5" and is tightened by screwing the two plates together with the included nuts and bolts. Rubber ball, socket technology dampens shock and vibration, as well as allows for almost infinite adjustment, perfect viewing angles.  Specifications: Material: Powder Coated Marine Grade Aluminum Ball Size: C Size 1.5" Rubber Ball Note: The "U" in the part number reflects product packaged in poly bag. Weight: 1.55 lbs.

RAM Yoke Clamp Mount w/Diamond Base - Long Part #: RAM-B-121-C-238U Universal glare shield/yoke mount with LONG double socket arm and universal diamond base adapter, is ideally suited for a day on the wing and yet easily removed for travel in the flight bag. Both strong and light weight, this new clamping base is perfect for numerous electronic devices commonly found in the cockpit. Modular in design, switch out the clamps for a perfect fit no matter what the mounting surface, or add a second ball to mount another device. Crafted to hold firm to most glare shields, yokes, or tubing, practically any aircraft can benefit from this product. Simple to use and exceptionally versatile, RAM has created another "must have" for any pilot. The RAM-B-121-C-238U fits rails or edge lips from 0.625" to a maximum of 1.25". The mounting base can also accept a second ball giving you the ultimate double ball base. Clamp Dimensions: Fits rails or edge lips from 0.625" to a maximum of 1.25" Material: High Strength Composite and Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag. The rail does not need to be perfectly round to mount this base.

Hydro Clamp/Mount Adapter V2 for Tower Speaker - White The updated V2 clamp is part of the DS18 Hydro All Elements Series which is comprised of many components and accessories to make any build imaginable come to life.  With over 50 marine grade compliant products, we have whatever you need for your ATV, UTV, Side by Side, Jeep, Motorcycle, Boat, or anything in between.  We invite you to get as creative as possible and make the loudest, clearest system on any terrain, water body, or air. Universal Fit, it's perfect for mounting towers/pods on roll bars and cages - perfect for wakeboard speakers! Features: Full Rounded die-cast solid aluminum Buried wire, or open-wire mounting optional Included 2.25", 2.5", 2.75", 3" NBR Pad 360 degree Rotational Bracket Tilt Adjustable 30 degrees UV-Compliant Gloss ∗Sold as an Individual

RAM® Tough-Claw™ Small Clamp Mount with Diamond Plate The RAM-B-400-238U consists of the small RAM® Tough-Claw™ base, marine-grade aluminum double socket arm, and diamond base adapter. The RAM® Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round, square, and odd-shaped rails and bars. The RAM® Tough-Claw™ can be clamped on rails from 0.625" - 1.14" outer diameter. The diamond base adapter contains the industry standard universal 2-hole AMPS hole pattern, which will connect to a large variety of RAM® Mount and third-party holders. The mount is designed with a RAM® 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm, allowing for almost infinite adjustment and perfect viewing angles. Features: Includes a small version of the RAM® Tough-Claw™ and medium length B size RAM® double socket arm with diamond plate features industry-standard AMPS pattern and measures 2.43" x 1.31" A small version designed to quickly clamp to round, square, and odd-shaped rails and bars ranging from .625" to 1.14" in outer diameter; rubber pads provide stable gripping and protection of mounting surface Made of marine-grade aluminum, high-strength composite, and stainless steel hardware for durability and reliability in the most demanding environments Backed by a lifetime warranty Specifications: Clamp Range: .625" - 1.14" diameter Socket to Socket Length: 3" Hole Pattern: 2-Hole AMPS: 1.912" Plate Size: 2.43" x 1.31" Ball Size: B Size (1") Weight Capacity: Standard Use: 2 lbs, Heavy-Duty Use: 1 lb Materials: Marine-grade aluminum and high-strength composite Packaging Type: Polybag Weight: 0.69 lbs

RAM Yoke Clamp Mount w/Double Socket Arm & Diamond Base Adapter Part #: RAM-B-121-238U Consists of a double socket arm, universal diamond base and yoke clamp base. The hole pattern found on the diamond base will connect to many RAM cradles, as well as third party cradles including mounts with the industry standard AMPS hole pattern. The clamp base will accommodate rails in diameter from 0.625" to 1.25". The 1" rubber ball is at a right angle to the plane of the mount so when connected to a rail, the ball sits parallel to the rail. Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.

ShadeFin Mini Clamp Mount ShadeFin Mini's highly portable clamp mount quickly connects to any square rail, table, deck rail, or lip up to 2.25" thick and is a great solution for pontoon boat rails. Features and Benefits: Easily installed to most railing sizes Includes two screws that can be securely tightened  Constructed out of aluminum-grade grade-6061 alloys with two threaded stainless steel Type-304 clamping rods includes an injection-molded nylon cap and knobs 3-year limited warranty Specifications: Finish: Powder coated, misty silver

RAM® Tough-Claw™ Medium Clamp Mount with Diamond Plate The RAM-B-404-238U consists of the medium RAM® Tough-Claw™ base, marine-grade aluminum double socket arm, and diamond base adapter. The RAM® Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round, square, and odd-shaped rails and bars. The RAM® Tough-Claw™ can be clamped on rails from 1" to 1.6" in outer diameter. The diamond base adapter contains the industry standard universal 2-hole AMPS hole pattern, which will connect to a large variety of RAM® Mount and third-party cradles. The mount is designed with a RAM® 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm, allowing for almost infinite adjustment and perfect viewing angles. Specifications: Clamp Range: 1" - 1.6" diameter Socket to Socket Length: 3" Hole Pattern: 2-Hole AMPS: 1.912" Ball Size: B Size (1") Weight Capacity: Standard Use: 2 lbs, Heavy-Duty Use: 1 lb Materials: Marine-grade aluminum and high-strength composite Packaging Type: Polybag Weight: 0.98 lbs

RAM Yoke Clamp Mount w/iPad mini EZ-ROLL'R Cradle The EZ-ROLL'R consists of a high strength composite cradle and patent pending roller design. The patent pending roller design allows for smooth placement and removal of the iPad, while keeping it secure while on the go. Compatible and interchangeable with a wide range of popular RAM Mounting products, this cradle is ready to compliment your iPad and become the most useful accessory in your vehicle. The EZ-ROLL'R cradle is compatible with the following tablets: Apple iPad mini WITHOUT CASE, SKIN OR SLEEVE Specifications: Docking Cradle: No Locking Cradle: No Fits Tablets WITH Cases: No Fits Tablets WITHOUT Cases: Yes Low Vibration Environment: Yes High Vibration Environment: Yes Cradle Features: 1. Compatible with various iPad cable/docking accessories 2. Patent pending roller design for super smooth placement and removal of the iPad 3. High strength materials maximize longevity of cradle 4. Full access to all ports 5. Lifetime warranty Material: High Strength Composite Yoke Clamp Mount Features: Consists of a double socket arm, round 2.5" base that contains the universal AMPs hole pattern and yoke clamp base. The clamp base will accommodate rails in diameter from 0.625" to 1.25". The 1" rubber ball is at a right angle to the plane of the mount so when connected to a rail, the ball sits parallel to the rail. This mount is designed to be a universal mounting solution for both RAM and non-RAM designed products.

RAM® Glare Shield Clamp Mount with Rear View Mirror The RAM-B-126 consists of a glare shield clamp base, a double socket arm, and a 7" x 14" mirror. This mount is designed to mount to the lip edge of a flat surface up to 5/8" thick. The base has two composite bolts that, when tightened, clamp the base to the lip surface. A RAM 1" diameter rubber ball is connected to the base, allowing users to connect a RAM 1" diameter arm socket and connection plates to create the perfect mount for the application. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm, allowing for almost infinite adjustment and perfect viewing angles. Specifications: Hardware Included: Assembly hardware Clamp Range: 0.625" max Ball Size: B Size (1") Weight Capacity: Standard Use: 2 lbs, Heavy-Duty Use: 1 lb Materials: Marine-grade aluminum Packaging Type: Retail box Weight: 3.2 lbs

RAM Glare Shield Clamp Mount with Diamond Base Adapter The RAM-B-177U consists of a double socket arm, glare shield clamp base and diamond base adapter. The RAM-B-177U is designed to mount to the lip edge of a flat surface up to 1" thick. Popular mounting edges include a car side window edge lip or glare shield on an airplance. The base has two composite bolts that, when tightened, clamp the base to the lip surface. A RAM 1" diameter rubber ball is connected to the base allowing you to connect a RAM 1" diamter arm socket and connection plates to create the perfect mount for your application. The hole pattern found on the diamond base adapter will connect to most RAM cradles. Mount will attach to flat surfaces with the following dimensions: Min: 4.4mm / 0.17" Max: 28.0mm / 1.12" Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM Yoke Clamp Mount with Tab-Tite™ Cradle for the Apple iPad, iPad 2 & HP TouchPad Part #: RAM-B-121-TAB3U The RAM-B-121-TAB3U consists of a double socket arm, universal diamond base, yoke clamp base and Tab-Tite™ cradle. The clamp base will accommodate rails in diameter from 0.625" to 1.25". Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at the base and cradle. With a twist of the arm knob, you can move the Tab-Tite™ mount to your optimum viewing position. The RAM Tab-Tite™ is compatible with the following tablets: Apple iPad Apple iPad 2 Apple iPad's with bumper or case including the Otterbox case HP TouchPad HP TouchPad's with bumper or case including the Otterbox case Tab-Tite™ Cradle Features: 1. Support cups contain open slots to accommodate for devices of various sizes, including tablets in protective sleeves 2. Back plate can support various size support cups 3. Spring loaded tension provides secure support for your tablet 4. Spring loaded cradle allows for quick release of your tablet 5. Full access to all ports Material: High Strength Composite and Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber "B" Ball Size

RAM Glare Shield Clamp Mount w/Short Double Socket Arm & Round Base Adapter w/AMPs Hole Pattern The RAM-B-177-202U consists of a glare shield clamp base, short double socket arm and round base that contains the universal AMPs hole pattern. This mount is designed to mount to the lip edge of a flat surface up to 5/8" thick. Popular mounting edges include a car side window edge lip or glare shield on an airplance. The base has two composite bolts that, when tightened, clamp the base to the lip surface. A RAM 1" diameter rubber ball is connected to the base allowing you to connect a RAM 1" diamter arm socket and connection plates to create the perfect mount for your application. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. Mount will attach to flat surfaces with the following dimensions: Min: 4.4mm / 0.17" Max: 28.0mm / 1.12" Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.