SC112 PowerTower® Port Mounted Bar f/GPS/VHF/Navtex Antenna Mounts GPS, VHF and Navtex antennas above the radar for maximum visibility and performance.   Works with standard 1” x 14 TPI thread. Compatible with: Scanstrut aft leaning PowerTower® radar mounts Features: Designed for the installation of GPS antenna and ‘Whip’ type VHF, HF/SSB, AM/FM, and cellular antenna of up to 1m in height All mounting holes predrilled for easy retrofit installation, attach using mounting bolts.  No extra fastenings required Cables run internally via a watertight seal Technical Specifications: Material - 316 Stainless Steel Height - 12.5" (318mm) Mount Position - Port side In the Box: Antenna bar Instruction manual *Sold as an Individual

SC111 PowerTower® Starboard Mounted Bar f/GPS/VHF/Navtex Antenna Mounts GPS, VHF and Navtex antennas above the radar for maximum visibility and performance.   Works with standard 1” x 14 TPI thread. Compatible with: Scanstrut aft leaning PowerTower® radar mounts Features: Designed for the installation of GPS antenna and ‘Whip’ type VHF, HF/SSB, AM/FM, and cellular antenna of up to 1m in height All mounting holes predrilled for easy retrofit installation, attach using mounting bolts.  No extra fastenings required Cables run internally via a watertight seal Technical Specifications: Material - 316 Stainless Steel Height - 12.5" (318mm) Mount Position - Starboard side In the Box: Antenna bar Instruction manual *Sold as an Individual

APT-GPS-01 PowerTower® Center Mounted Bar f/GPS/VHF/Navtex Antenna Mounts GPS, VHF and Navtex antennas above the radar for maximum visibility and performance.   Works with standard 1” x 14 TPI thread. Compatible with: Scanstrut aft leaning PowerTower® radar mounts Features: Designed for the installation of GPS antenna and ‘Whip’ type VHF, HF/SSB, AM/FM, and cellular antenna of up to 1m in height All mounting holes predrilled for easy retrofit installation, attach using mounting bolts.  No extra fastenings required Cables run internally via a watertight seal Technical Specifications: Material - Aluminum  Height - 12.48" (404mm) Mount Position - Center In the Box: Antenna bar Instruction manual *Sold as an Individual

SC110 PowerTower® Port Mounted Light Bar  Installs navigation lights above the antenna for maximum visibility and performance. Compatible with: Scanstrut aft leaning PowerTower® radar mounts Features: All mounting holes predrilled for easy retrofit installation, attach using mounting bolts, no extra fastenings required Cables run internally via a watertight seal Technical Specifications: Material - 316 Stainless Steel Height 16.1" (410mm) Mount Position - Port side In the Box: Light bar Instruction manual *Sold as an Individual

SC113 PowerTower® Port Light Bar w/Integrated 360° White LED Light Scanstrut integrated light mount comes pre-fitted with a LED 360° all-round white light. Compatible With: Scanstrut aft leaning PowerTower® radar mounts Features: Perfect anchor / steaming light upgrade All mounting holes predrilled for easy retrofit installation No extra fastenings required Cables run internally via a watertight seal Technical Specifications: Range 2NM Input Voltage - 12V Material - 316 Stainless Steel Height - 17" (431mm) Mount Position - Port side In the Box: Light bar LED 360° all-round light - White Instruction manual *Sold as an Individual

TB-01 T-Bar Mount for GPS/VHF Antenna Mount  The T-Bar can hold up to four GPS/VHF antennas, and can easily be installed onto pushpit rails and decks to provide the perfect installation solution for power and sail boat owners looking for the secure and neat storage of antennas. Features: Designed to fit up to four (4) GPS/VHF antennas The aerial bar can be rotated during installation to determine the ideal position for each antenna. Internal cable routing to ensure a neat appearance once installed. Perfect for mounting onto a variety of surfaces: guard rails or stanchions, 'A' frames and cabin roofs.  Technical Specifications: Material - Stainless Steel Height - 9.36" (238mm) In the Box: Mount Mounting hardware  Installation manual *Sold as an Individual

TP-01 T-Bar Mount f/GPS/VHF Antenna Cost effective mounts for up to four (4) GPS/VHF antennas.  Easy to install and ideal for both sail and powerboats. Features: Designed to fit up to four (4) GPS/VHF antennas The aerial bar can be rotated during installation to determine the ideal position for each antenna. Internal cable routing to ensure a neat appearance once installed. Customisable height Technical Specifications: Material - Stainless Steel Height - 9.36" (238mm) In the Box: Mount Mounting hardware  Installation manual *Sold as an Individual

PT2004 - PowerTower® Radar Mount - 6" Aft Leaning The Scanstrut Composite PowerTower is engineered for outstanding strength with an unparalleled surface finish.  Manufactured using the best composite materials, PowerTower® is molded as a single structure with no joints, offering unparalleled strength and durability. Designed to install your radar on the roof, T-top, flybridge or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions.  By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar. There is a PowerTower® to fit pretty much every modern radar. Compatible with: B & G - HALO 20, 20+, 24 radars Garmin - Fantom 18, 24, GMR18HD / 18xHD / 18HD+, GMR24HD / 24xHD, GMR40 radars Humminbird - HB 2124 CHRIP radar ICOM - MR-1010RII radar Intellian - FB150 in i3, FBR250 in i3, FBR250R in i3, i3 radars KVH - TracPhone V3-HTS, TracVision M2, M3, TV3, V3 radars Lowrance - 3G/4G radars Raymarine - 37STV, QUANTUM (Q24C), QUANTUM 2 (Q24D), RD218, RD418/RD418HD, RD424/RD424HD radars Sea-Tel - Coastal 14 radar Simrad - 3G/4G, DX45, DX60 / DX64-S, GB40 / NX40/45 / NSE8/12 radars Sitex - RADARpc - 4D radar Features: Hollow stem allowing internal routing of all cables Watertight Installation - IP65 gland to seal cable entry into stem and a watertight base seal included so no need for messy sealant.  Ease of Install - the pre-drilled mounting holes, the antenna fastens to PowerTower top plate using its own mounting bolts.  Technical Specifications: Radar Type - Dome Material - Composite Height - 6.2"" (158mm) Mounting Type - Aft leaning - 30° In the Box: Mount Mounting hardware (excluding screws/bolts)  Installation manual *Sold as an Individual 

PT2005 - PowerTower® Radar Mount - 6" Aft Leaning The Scanstrut Composite PowerTower is engineered for outstanding strength with an unparalleled surface finish.  Manufactured using the best composite materials, PowerTower® is molded as a single structure with no joints, offering unparalleled strength and durability. Designed to install your radar on the roof, T-top, flybridge or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions.  By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar. There is a PowerTower® to fit pretty much every modern radar. Compatible with: Furuno - 1621, 1622, 1623, 1715, 1724, 1734, 1824, 1832, 1834, 1835, DRS2D, DRS2D-NXT, DRS42DL, DRS42DL+, DRS4D/DRSD4D-NXT, DRS4W, NavNet (18" and 24") radars Humminbird - AS 21 RD4KW radar Intellian - i1 radars Interphase - Mini RE-1, RE-8 radars JRC - 1000, 1000mk2, 1066, 1500, 1500mk2, 1800, 2000 radars Koden - 2kW 12" radar KVH - TracVision M1 and TV1 radars Lowrance - LRA-1800, RB714A, DX42, LRA-2400 HD radars Majestic - SATMAR32 radar Navman - 8000 Series (8084 and 8120) 18" radars Nobletec - 2kW - 20" radars Northstar - M Series 18" and 24"  8000i radars Raymarine - 33STV radars Seiwa - SWR-1, 8, 9 radars Simrad - GB40, NX40/45, NSE8/12, RB712A, DX42S, DX64S radars Sitex - MDS-1, 8, 12, NKE-1066 radars Techmarine - T-72.01, 72.02, 72.04 Radars Features: Hollow stem allowing internal routing of all cables Watertight Installation - IP65 gland to seal cable entry into stem and a watertight base seal included so no need for messy sealant.  Ease of Install - the pre-drilled mounting holes, the antenna fastens to PowerTower top plate using its own mounting bolts.  Technical Specifications: Radar Type - Dome Material - Composite Height - 6.2"" (158mm) Mounting Type - Aft leaning - 30° In the Box: Mount Mounting hardware (excluding screws/bolts)  Installation manual *Sold as an Individual 

Universal D Size Ball Mount with Short Arm for 9"-12" Fishfinders and Chartplotters The RAM-D-115-C consists of a base with a 2.25” diameter D size ball, a short arm and a 6.25” x 2” marine electronic plate with a D size ball for supporting larger devices. This marine electronic plate contains different combinations of pre-drilled holes and is a direct fit for 9”-12” fishfinder gimbal brackets. Supports devices such as the Lowrance HDS-9 Gen2 Touch, Garmin GPSMAP 7407 and more. Overall Length: 7.325" Weight Capacity: Up to 10 lbs. Material: Powder Coated Marine Grade Aluminum Ball Size: 2.25" Rubber "D" Ball Size

Universal D Size Ball Mount with Long Arm for 9"-12" Fishfinders and Chartplotters The RAM-D-115-E consists of a base with a 2.25” diameter D size ball, a long arm and a 6.25” x 2” marine electronic plate with a D size ball for supporting larger devices. This marine electronic plate contains different combinations of pre-drilled holes and is a direct fit for 9”-12” fishfinder gimbal brackets. Supports devices such as the Lowrance HDS-9 Gen2 Touch, Garmin GPSMAP 7407 and more. Overall Length: 15.2" Weight Capacity: Up to 10 lbs. Material: Powder Coated Marine Grade Aluminum Ball Size: 2.25" Rubber "D" Ball Size

GPS - Fishfinder Combos

ROKK Mini Pro Mount Kit f/Lowrance HOOK2 and Simrad Cruise - Kayak Track Mount The ROKK mini HOOK² mount was designed alongside Lowrance’s product design team, ensuring the perfect fit for the HOOK2 4x, 4x GPS, 5x, 5 models, the world’s easiest fish finder range.  The 360° rugged marine grade mount enhances your fishing experience; you can mount, adjust and lock your HOOK² to the optimum position allowing you to spend more time fishing and less time re-adjusting.  When you're done fishing for the day, simply release the HOOK² and ROKK mini mount from its base with the quick release button to take home with your catch. The HOOK² clamp is compatible with the ROKK mini body and all 6 ROKK mini bases. Compatible With: Lowrance HOOK2 4x, 4x GPS, 5, 5x Lowrance HOOK Reveal 5" Simrad Cruise 5 Features: Engineered to withstand high shock loading. Secure mount for smart phones, handheld GPS and other small devices. Base secures with included hardware. In the Box: RL-521 ROKK Mini Quick Release Adapter for Lowrance HOOK & Simrad Crusie Displays  RLS-407 ROKK Mini Kayak Track Mount  RLS-AM ROKK Mini Adjustable Arm *Sold as a Kit

Triple Mount Adapter for GPS, Light and VHF Light bar adapter to mount a light and 2 GPS units. (Light and electronics not included)

GPS - Track Plotter