|
MKA-21 Composite Quick Release Bracket
Easily remove your electric-steer, bow-mount trolling motor. High-yield composite construction is super strong and impervious to corrosion. Low-profile design leaves deck clear when motor is removed. Locking handle with stainless steel pins can be secured with padlock (padlock not included, sold separately).NOTE: Not for use with 72" shaft length motors.
Features
Allows trolling motor to be quickly removed from and reattached to boat deck
Low-profile design attaches trolling motor to top bracket and drops in over deck-mounted puck
Composite construction resistant to rust, corrosion, and discoloration
Includes stainless steel mounting hardware and locking pin
Locking handle can be secured with padlock (not included) for additional security
Compatible with Ulterra, Terrova, PowerDrive, PowerDrive V2, PowerDrive Pontoon and Deckhand 40
NOTE: Not for use with any 112 lbs. thrust motors or any motor with a shaft length of 72” or longer. Instead use the MKA-53 model.
Designed for use in freshwater
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
78.46 |
|
|
RTA-17 Composite Quick Release Bracket
Easily remove your electric-steer, bow-mount trolling motor. High-yield composite construction is super strong and impervious to corrosion. Low-profile design leaves deck clear when motor is removed. Locking handle with stainless steel pins can be secured with padlock (padlock not included, sold separately).NOTE: Not for use with 72" shaft length motors.
Features:
Allows trolling motor to be quickly removed from and reattached to boat deck
Low-profile design attaches trolling motor to top bracket and drops in over deck-mounted puck
Composite construction resistant to rust, corrosion, and discoloration
Includes stainless steel mounting hardware and locking pin
Locking handle can be secured with padlock (not included) for additional security
Compatible with Riptide Ulterra, Riptide Terrova, Riptide ST, Riptide PowerDrive, and Riptide SP
NOTE: Not for use with any 112 lbs. thrust motors or any motor with a shaft length of 72” or longer. Instead use the RTA-54 model.
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
77.54 |
|
|
Riptide® Saltwater Composite Quick Release Bracket
RTA-19
Allows for easy removal of any Riptide® SM or Riptide SE bow-mount trolling motor
High-yield composite construction is super strong and impervious to corrosion
Low-profile design leaves deck clear when motor is removed
Locking handle with stainless steel pins can be secured with padlock (not included).
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
95.89 |
|
|
MKA-16-03 Quick Release Bracket
For quick, easy removal of your electric-steer, bow-mount trolling motor. Extruded aluminum design with side screw provides quiet and secure locking system.
Compatible with Ulterra, Terrova, PowerDrive, PowerDrive V2, PowerDrive Pontoon and Deckhand 40.
- Allows trolling motor to be quickly removed from and reattached to boat deck
- Sidescrew design attaches trolling motor to top bracket and slides into - deck-mounted bottom bracket, secured with tightening screw
- Solid, anodized aluminum construction
- Includes stainless steel mounting hardware
- Brackets can be secured with padlock (not included) for additional security
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
64.03 |
|
|
Large Offset Trolling Motor Plate for Minn Kota’s Quest
The Sea Brackets Large Offset Trolling Motor Mounting Plate, designed for Minn Kota’s RTA-55 Quick Release Bracket, offers a robust and reliable solution for installing any Quest Series Trolling motor. Crafted from 6061 T6 aluminum, each plate is primed, powder-coated, and UV-protected for exceptional durability against the elements. Whether for port or starboard installation, these plates boast clean, accurately gauged holes for seamless bolt engagement.
Suggested Hardware:
316L stainless steel hardware is recommended for rust prevention
Mounting hardware is included with Minn Kota’s RTA-55 Quick Release Bracket
Backing disk from Sea Brackets or an alternative backing support system
1/4–20 tapered Phillips machine screws, fender washers, and lock nuts
3/8–16 Flathead Phillips machine screws, fender washers, and lock nuts
Note: Hardware length is dependent on the thickness of the hull, backing hardware, and other various components.
|
405.00 |
|
|
20" Straight Trolling Motor Plate for Minn Kota’s Quest
The Sea Brackets 20" Straight Trolling Motor Mounting Plate, designed for the Minn Kota’s RTA-55 Quick Release Bracket, offers a robust and reliable solution for installing any Quest Series Trolling motor. Crafted from 6061 T6 aluminum, each plate is primed, powder-coated, and UV-protected for exceptional durability against the elements. Whether for port or starboard installation, these plates boast clean, accurately gauged holes for seamless bolt engagement.
Suggested Hardware:
316L stainless steel hardware is recommended for rust prevention
Mounting hardware is included with Minn Kota’s RTA-55 Quick Release Bracket
Backing disk from Sea Brackets or an alternative backing support system
1/4–20 flat-head Phillips machine screws, fender washers, and lock nuts
3/8–16 Flat-head Phillips machine screws, fender washers, and lock nuts
Note: Hardware length is dependent on the thickness of the hull, backing hardware, and other various components.
|
217.50 |
|
|
Pontoon PowerDrive™ 55 Trolling Motor with Foot Pedal - 12V - 55LB - 48"
Put Minn Kota power to work on your pontoon. You get a quiet, steady, all-day performance that's right for you. And with quick and easy mounting, you get a motor that's built to let you sit back and appreciate a perfect day on the lake.
Deploy-Assist Lever
Get in and out of the water easily. Just depress the lever to deploy your trolling motor and when it's time to move, it stows easily and securely.
Aluminum Quick Release Bracket
Quickly, easily remove your motor with this aluminum bracket. It comes standard on PowerDrive Pontoon models and features a quiet, secure locking system.
PowerDrive Foot Pedal
Control speed, steering, and momentary and constant on/off with the PowerDrive foot pedal, which is waterproof and features an 18' cord. Not included on GPS-enabled models.
Push-to-Test Battery Meter
Press a button to get an instant "stage of charge" reading.
Digital Maximizer™
Provides up to 5 times longer run time on a single battery charge. These variable-speed trolling motors let you dial in your exact speed, and they deliver only as much power as you need, helping to conserve your battery for a full day of fishing.
Power Prop
Delivers extra power to push through any fishing scenario and excels in open water.
Indestructible Composite Shaft — Guaranteed for Life
At the core of your Minn Kota trolling motor is an indestructible composite shaft. It's a Minn Kota exclusive, and they guarantee it for life.
Cool, Quiet Power
Every Minn Kota lower unit runs cool to extend trolling motor life and stays quiet.
What's Included
Pontoon PowerDrive 55 lb. 48" Foot-Control Motor, Corded Foot Pedal, MKP-37 Prop, MKA-16-03 Quick Release bracket, and Mounting hardware
Specifications:
For Use In: Freshwater
Shaft Length (inch): 48"
Max Thrust (pounds): 55 lbs.
Voltage: 12
One-Boat Network Compatible: No
QUEST Series: No
Spot-Lock: No
Built-In Sonar: None
Foot Pedal Style: Side-to-Side / Electric
Control: Foot Pedal
Auto/Stow Deploy: No
Power Trim: No
Power Steering: Yes
Lift-Assist: No
Bowguard: No
Wireless Remote: No
i-Pilot Link (GPS): No
i-Pilot (GPS): No
AutoPilot: Yes
CoPilot: No
Speeds: Variable
Digital Maximizer: Yes
Battery Meter: Yes
Max Amp Draw: 50
Mount Style: Bolt-on
Mounting Location: Bow-mount
Motor Style: Electric-steer
Prop: Power Prop (MKP-37)
Warranty: Two-Year Warranty
|
1033.20 |
|
|
Pontoon PowerDrive™ 70 Trolling Motor with Foot Pedal - 24V - 70LB - 48"
Put Minn Kota power to work on your pontoon. You get a quiet, steady, all-day performance that's right for you. And with quick and easy mounting, you get a motor that's built to let you sit back and appreciate a perfect day on the lake.
Deploy-Assist Lever
Get in and out of the water easily. Just depress the lever to deploy your trolling motor and when it's time to move, it stows easily and securely.
Aluminum Quick Release Bracket
Quickly, easily remove your motor with this aluminum bracket. It comes standard on PowerDrive Pontoon models and features a quiet, secure locking system.
PowerDrive Foot Pedal
Control speed, steering, and momentary and constant on/off with the PowerDrive foot pedal, which is waterproof and features an 18' cord. Not included on GPS-enabled models.
Push-to-Test Battery Meter
Press a button to get an instant "stage of charge" reading.
Digital Maximizer™
Provides up to 5 times longer run time on a single battery charge. These variable-speed trolling motors let you dial in your exact speed, and they deliver only as much power as you need, helping to conserve your battery for a full day of fishing.
Power Prop
Delivers extra power to push through any fishing scenario and excels in open water.
Indestructible Composite Shaft — Guaranteed for Life
At the core of your Minn Kota trolling motor is an indestructible composite shaft. It's a Minn Kota exclusive, and they guarantee it for life.
Cool, Quiet Power
Every Minn Kota lower unit runs cool to extend trolling motor life and stays quiet.
What's Included
Pontoon PowerDrive 70 lb. 48" Foot-Control Motor, Corded Foot Pedal, MKP-37 Prop, MKA-16-03 Quick Release Bracket and Mounting Hardware
Specifications:
For Use In: Freshwater
Shaft Length (inch): 48"
Max Thrust (pounds): 70 lbs.
Voltage: 24
One-Boat Network Compatible: No
QUEST Series: No
Spot-Lock: No
Built-In Sonar: None
Foot Pedal Style: Side-to-Side / Electric
Control: Foot Pedal
Auto/Stow Deploy: No
Power Trim: No
Power Steering: Yes
Lift-Assist: No
Bowguard: No
Wireless Remote: No
i-Pilot Link (GPS): No
i-Pilot (GPS): No
AutoPilot: Yes
CoPilot: No
Speeds: Variable
Digital Maximizer: Yes
Battery Meter: Yes
Max Amp Draw: 42
Mount Style: Bolt-on
Mounting Location: Bow-mount
Motor Style: Electric-steer
Prop: Power Prop (MKP-37)
Warranty: Two-Year Warranty
|
1218.08 |
|
|
MKA-57 Quick Release Bracket
The bracket and top plate allow you to easily slide the motor inboard (10") or easily remove it for storage and security. Features anodized aluminum construction with stainless steel components and hardware for optimal corrosion protection in all saltwater or freshwater environments.
Features:
Slide motor inboard 10" for a better boat cover fit and more clearance when launching the boat
Designed specifically for motors featuring QUEST technology to meet the increased stress created by high-thrust motors and long shaft lengths
Allows trolling motors to be quickly removed from and reattached to the boat deck
The dual Cam-lock design reduces bracket movement and noise
Includes stainless steel mounting hardware, a lanyard, and a locking pin
Upper and lower plates include slots for securing with a padlock (not included) for added security
Compatible with electric steer motors featuring QUEST technology
Designed for use in freshwater or saltwater
|
435.86 |
|
|
MKA-56 Quick Release Bracket
Easily remove your electric steer, bow-mount trolling motor featuring QUEST technology. High-yield composite construction is super strong and impervious to corrosion and is specifically designed for higher thrust motors and longer shaft lengths. The low-profile design leaves the deck clear when the motor is removed. The locking handle with stainless steel pins can be secured with a padlock (padlock not included, sold separately).
Features:
Designed specifically for motors featuring QUEST technology to meet the increased stress created by high-thrust motors and long shaft lengths
Allows bow-mount trolling motors to be quickly mounted and/or removed from boat deck
Low-profile design attaches trolling motor to top bracket and drop in over deck-mounted puck
Constructed of marine grade composite, powder-coated and anodized aluminum, and stainless steel to resist rust, corrosion, and discoloration
Locking handle can be secured with padlock (not included) for additional security
Compatible with electric steer motors featuring QUEST technology
Designed for use in freshwater or saltwater
|
348.70 |
|
|
MKA-64 Quick Release Bracket
Easily remove your electric steer and bow-mount trolling motor. High-yield composite construction is super strong, impervious to corrosion, and specifically designed for higher thrust motors and longer shaft lengths. The low-profile design leaves the deck clear when the motor is removed. A locking handle with stainless steel pins can be secured with a padlock (padlock not included; sold separately). NOTE: Recommended for 112 lb. thrust and 72" shaft trolling motors.
Features:
Designed to meet the increased stress created by high-thrust motors and long shaft lengths
Allows bow-mount trolling motors to be quickly mounted and/or removed from the boat deck
The low-profile design attaches the trolling motor to the top bracket and drops in over the deck-mounted puck
Constructed of marine grade composite, powder-coated and anodized aluminum, and stainless steel to resist rust, corrosion, and discoloration
The locking handle can be secured with a padlock (not included) for additional security
Designed for use in freshwater
|
200.50 |
|
|
MKA-51 Quick Release Bracket
The bracket and top plate allows you to easily slide the motor inboard (up to 6"), or easily remove it for storage and security. Features corrosion-resistant anodized aluminum construction with stainless steel hardware.
Compatible with Ulterra™, Terrova®, PowerDrive™, PowerDrive V2 and DeckHand 40.
Features:
Slide motor inboard 6” for a better boat cover fit and more clearance when launching boat
Allows trolling motor to be quickly removed from and reattached to boat deck
Cam-lock design reduces bracket movement and noise
Includes stainless steel mounting hardware, lanyard, and locking pin
Upper and lower plates include slot for securing with padlock (not included) for added security
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
229.96 |
|
|
MKA-42 Quick Release Bracket
For quick, easy removal of your Fortrex or Maxxum bow-mount trolling motor. Extruded aluminum design of these brackets features a side screw that provides a quiet and secure locking system. Ultra-tight tolerances eliminate bracket movement and noise. Fits 42" shaft foot control motors, 42" and 52" shaft hand control motors.
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
128.06 |
|
|
MKA-58 Boat Deck Reinforcement Kit
Provides additional strength, stability, and versatility for mounting Minn Kota Quest series RT Instinct, Ulterra, Terrova, and RT Terrova trolling motors.
Features:
Provides additional strength and stability for mounting Minn Kota Quest series trolling motors
Helps to distribute torque loads associated with higher thrust motors
Can be installed directly to the boat deck or in combination with MKA-56 / RTA-55 quick-release bracket
Multiple mounting hole patterns allow for flexible installation
Includes stainless steel hardware
Designed for use in saltwater
Compatible with Ulterra, Terrova, Riptide Terrova, and Riptide Instinct QUEST series trolling motors
|
234.70 |
|
|
MKA-32 Electric Steer Quick Release Bracket with Cover
Features:
Designed for fast removal of any Terrova™, PowerDrive™ V2, or PowerDrive bow-mount trolling motor
Cam-lock design features ultra-tight tolerances that eliminate bracket movement and noise
The locking lever includes a pin and lanyard
Upper and lower plates include slots for securing with a padlock (not included)
Includes a composite cover that attaches to the lower half of the bracket when the motor is removed, keeping the deck profile clean
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
146.35 |
|