7" x 7" Hinged Adapter *For 7"x7" base plate. *Fits 5" - 24" tall radar mounts. The Seaview Hinge adapter is the ideal solution for someone who needs extra height clearance when storing their boat. This allows the user to have their Seaview mount hinge backwards. Available for Seaview mounts with a base dimension of 7"x7", 8"x8" and 10-"x10". The modular design allows the user to not have to replace the entire mount when a different radar or satdome is used. Instead the user can just replace the top plate. No Tools Needed With our captive knobs you do not need tools, and these will stay with the hinge when it's open or closed. Gain Height Clearance Simple and easy solution to lower the height of your radar mount. The hinge adapter can hinge back 180°. Allowing you the most clearance possible.

PM-H10 Hingle Adapter 10x10 Base Plate The Seaview Hinge adapter is the ideal solution for someone who needs extra height clearance when storing their boat. This allows the user to have their Seaview mount hinge backwards. Available for Seaview mounts with a base dimension of 7"x7", 8"x8" and 10-"x10". The modular design allows the user to not have to replace the entire mount when a different radar or satdome is used. Instead the user can just replace the top plate. No Tools Needed! With our captive knobs you do not need tools, and these will stay with the hinge when it's open or closed. Gain Height Clearance Simple and easy solution to lower the height of your radar mount. The hinge adapter can hinge back 180°. Allowing you the most clearance possible. *Not to be used for PMA-DM2-M2 or PMA-200 series mounts.

Hinge Adapter for 8" x 8" Base Plate The Seaview Hinge adapter is the ideal solution for someone who needs extra height clearance when storing their boat. This allows the user to have their Seaview mount hinge backward. Available for Seaview mounts with a base dimension of 7" x 7", 8" x 8" and 10" x 10". The modular design allows the user to not have to replace the entire mount when a different radar or satdome is used. Instead, the user can just replace the top plate. No Tools Needed With our captive knobs, you do not need tools, and these will stay with the hinge when it's open or closed. Gain Height Clearance A simple and easy solution to lower the height of your radar mount. The hinge adapter can hinge back 180°. Allowing you the most clearance possible. *Fits 36" tall radar mounts

Triple Mount Adapter for GPS, Light and VHF Light bar adapter to mount a light and 2 GPS units. (Light and electronics not included)

Electrically Actuated Hinge 24V Fits Seaview Mounts Ending in M1 & M2 The Seaview SVEHB1 electrically actuated hinge will fit all Seaview mounts with 7"x7" and 10"x10" mounting base plates. Some electronics can also be mounted directly to the hinge plates when needed (contact Seaview to direct mount electronics). Professionally designed to raise and lower marine electronics with the push of a button. This single electrically actuated hinge will accommodate single small Seaview mounts up to large dual mounts fully loaded with marine electronics. This hinge is 5-9/16" tall x 13" wide x 20-1/2" long. This will hinge approximately 93 degrees leaving the hinge plate vertical off the mounting surface about 11-7/16". This Seaview hinge is marine grade aluminum expertly fabricated for consistently superior welds. The actuator used is 24V however, 12V is an option with a conversion kit. The 24V actuator has a current draw of 10.4 amps on startup and when it is fully loaded with 2248 pound-force. The hinge has a very durable finish unlike anything else in the industry. This is first chem treated (for corrosion resistance), then an epoxy polyester primer coat is applied and finished with a polyester powder coat for a superior gloss white finish. There are two waterproof cable glands inside the hinge for water proof cable routing. This also has a removable lid to conveniently service the inside of the hinge if needed. This actuated hinge has been used for many applications. Some examples, but not limited to are: Princess 66, Navetta 48, Sunseeker 52 & 66, Absolute 58, Sabre 45, Jupiter 27 and HCB Yacht 65CC. Features: Electrically Actuated Hinge  Volt: 24V  Fits Seaview Mounts ending M1 and M2

3" Tall Satdome Adapter Seaview Low Profile Adapters are ideal for installations where space is limited due to their small mounting bases. All models feature a center channel that you can run all your satdome cables through. This allows for a nice clean installation. *The AMA18, AMA18IP & AMA24 are reinforced with an anodized aluminum insert. This provides superior strength and durability.

3" Low Profile Adapter for Raymarine Cyclone with 8" Round Baseplate Seaview Low Profile Adapters are ideal for installations with limited space due to their small mounting bases. All models feature a center channel through which you can run all your satdome cables. This allows for a nice clean installation. *Reinforced with an anodized aluminum insert. This provides superior strength and durability.

Direct Mount Adapter Plate for Simrad HALO™ Open Array Radar Seaview's Simrad HALO™ adapter plate is a great solution when replacing an existing Simrad Broadband 3G™, Broadband 4G™, Raymarine or Garmin closed dome radar. Mounting holes pick up existing radar brands mentioned above and the Simrad HALO™ open array.

IsoMat Mast Platform Adapter This is an adapter for boats with Isomat masts (integral track at the front). This adapter is installed between the platform and the platform mounting feet, and allows the mounting feet to spread out wider.

Raritan HINGES Toilet Seat+Cover Hinge Set

  Working closely with all the major electronics manufacturers, Seaview offers an innovative range of high quality products for power and sailboats, pleasure and commercial. Seaview added a hardcoat anodizing process before powder coating to insure superior durability and corrosion protection. Seaview is dedicated to providing quality products with the highest level of service in the industry.     Powder Coated White Cable Glands - In Stock Now! The Seaview Cable Glands / Cable Clams provide waterproof cable routing made of UV stable Glass Filled (GF) ABS plastic, 316 stainless steel or black powder coated 316 stainless steel. Seaview cable gland options for 17mm to 334mm (0.67” to 1.38”) connectors, making it ideal for almost every installation.     Specials    Closeouts    Remanufactured    Rebates  

  Buy a new qualifying Seaview product now until June 15th, 2020, and receive savings up to $25. Qualifying products include Modular Mounts, Mast Mounts, Camera Mounts, Sail Pods, Deck Pods, Cable Glands and additional accessories. Don't miss out!   *Offer valid now until June 15th, 2020            Specials    Closeouts    Remanufactured   Rebates  

Seaview SEAVIEW by PYI is the market leader in designing and building mounting solutions for marine electronics. Working closely with all the major electronics manufacturers, we offer an innovative range of high quality products for power and sailboats; pleasure and commercial.

GBSA-1 Gimbal Bracket with Swivel Adapter Keep your Lowrance GPS receiver durably mounted on the dash with this gimbal bracket. Compatible with a host of GPS models, the bracket holds the receiver in an easy-to-read location while making sure it doesn't tumble from the dash at an inopportune moment. It also includes a swivel adapter that lets you adjust the screen depending on which angle is best for the situation. The GBSA-1, which installs in just a few minutes, is ideal for drivers, boaters, and other vehicle-based navigators. The unit works with Accumap, Cuda 168 EX, Fish I.D. 128, GlobalMap 3500C, GlobalMap 4800, IntelliMap 320, LMS-160 Map, LMS-332C, LMS-337C DF, LMS-480, Magna III, Magna III Plus, MagnaView, MagnaView Plus, Optima, SeaFinder 320DF, SeaView 1200, SeaView 1600, SeaView 600, SeaView 800, Strata 128, StrataView 128, SupraPro I.D., Ultra Classic, UltraMap, X102C, X107C DF, X125, X126DF, X135, X136DF, X-22A, X-25A, X-25B, X-45, X47EX, X-48, X-65, X-75, and X-85 models. Features: Dash-mounting bracket with swivel adapter for Lowrance GPS receivers Holds receiver in secure, easy-to-read location for intuitive GPS navigation Swivel adapter lets you adjust display for better viewing angles Works with boats, trucks, cars, and other vehicles Compatible with many X, LMS, and GlobalMap GPS units, among others

PM-W6-7 This 6° wedge goes between your Seaview mount and mounting surface. The base of the wedge is 7"x7" and is made from machined King Starboard . Utilize wedges to compensate for deck angle or planning attitude of the boat. Features Pre-drilled mounting holes allow for quick and easy installation Made from marine-grade polymer