|
5005 ANL 35-300AMP Fuse Block with Cover
Features:
Insulating cover satisfies ABYC/USCG requirements and cover breakouts allow access in any direction
For use on systems up to 32V DC
Large 5/16" - 18 studs accept 5/16" (M8) ring terminals, 14 AWG to 2/0 AWG wire
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
23.32 |
|
|
5028
ST Blade Fuse Block w/ Cover
6 Circuit w/out Negative Bus
Clear insulating cover with label recesses accept Small Format Labels
Cover Satisfies ABYC/USCG requirements for insulation
Tin-plated copper buses and fuse clips give 30 Amperes rating per circuit
Accepts ATO and ATC fast acting blade fuses
20 write-on circuit labels included
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
34.36 |
|
|
5029
ST Blade Fuse Block w/ Cover - 12 Circuit w/out Negative Bus
Clear insulating cover with label recesses accept Small Format Labels
Cover Satisfies ABYC/USCG requirements for insulation
Tin-plated copper buses and fuse clips give 30 Amperes rating per circuit
Accepts ATO and ATC fast acting blade fuses
20 write-on circuit labels included
Tin-plated copper buses and fuse clips give 30 Amperes rating per circuit
Accepts ATO and ATC fast acting blade fuses
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
44.26 |
|
|
5056100 - Water Resistant ST-Blade Fuse Block with Cover
This Blue Sea fuse block provides water-resistant circuit protection for ATO/ATC fuses and circuit breakers in a compact footprint. Now with wing screws for toolless access.
Features:
Water-resistant design with a standard ring or spade-type terminals
Allows for simple wiring with standard tools
Accepts a wide range of wire sizes
Includes 3 wire plugs to maintain a water-resistant rating if less than 4 loads are required
Accepts ATO and ATC fast acting blade fuses
Accepts ATO/ATC-Style Low Profile Circuit Breakers
Nests with other ST-Blade water-resistant fuse blocks and water-resistant 100A busbars to reduce wire
5056100 meets ABYC/USCG insulation requirements
Tin-plated copper busses and fuse clips
Includes four write-on circuit labels
Spare fuse and fastener storage in cover
Wing screws designed for tool-free installation of cover to meet ABYC compliance
Technical Specifications:
Cover - yes
Maximum Voltage - 32V DC
Bus Material - Tin-plated Copper
Mounting Holes - Accepts 1/4" (6mm) screws
Terminal Screws - 4 x # 8-32 with captive star lock washer
Wire Size - Input - (1) 8 AWG to 4 AWG
Wire Size - Load - (4) 16 AWG to 10 AWG
In the Box:
5056100 Busbar
Instruction Manual
*Sold as an Individual
|
35.99 |
|
|
ST Blade Fuse Block With Cover - 6 Circuit without Negative Bus
Part# 5035
Can be used for 24-hour circuits
Cover satisfies ABYC/USCG requirements for insulation, incorporates an easy to open push button latch providing easy access to fuses, storage for two spare fuses, and label recesses that accept Blue Sea Systems' Small Format Labels for circuit identification
Fuse blocks with covers include 20 write-on circuit labels
Tin-plated copper buses and fuse clips
Accepts ring or spade type terminals
Accepts ATO® and ATC® fast acting blade fuses
Fuses sold separately
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
34.36 |
|
|
5056 ST-Blade Water Resistant Fuse Block with Cover
Provides water-resistant circuit protection for ATO/ATC fuses & circuit breakers in a compact footprint. The single side nesting design allows for wire entry from one side to maximize space.
Features:
Water-resistant design with standard ring or fork type terminals allows for simple wiring with standard tools
Accepts a wide range of wire sizes
Includes 3 wire plugs to maintain water resistant rating if less than 4 loads are required
Accepts ATO and ATC fast-acting blade fuses
Accepts ATO/ATC-Style Low Profile Circuit Breakers
Nests with other ST-Blade Water-Resistant Fuse Blocks and Water-Resistant 100A Bus Bars to reduce wire
Insulating cover meets ABYC/USCG insulation requirements
Tin-plated copper busses and fuse clips
Includes four write-on circuit labels
Small format standard and custom labels available
Spare fuse and fastener storage in cover
Specifications:
Amperage: 80A per block/25A per circuit
Maximum Voltage: 32V DC
Bus Material: Tin-Plated Copper C11000
Mounting Holes: Clearance for 1/4" (6mm) screws
Screw Terminal Type: #8-32 Screws with captive star lock washer
Wire Size: (1) 8 AWG to 4 AWG - Input/(5) 16 AWG to 10 AWG - Load
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
33.60 |
|
|
VFDB2 MANL 2 Position Distribution Block with Cover
This compact distribution block from T-Spec will handle the high-current power distribution for your single source to two (2) smaller gauge power wires, ensuring that your wiring's connected securely, looking neat, and safely fused. T-spec's Universal Screw Design for securing the wires and mini ANL fuses to the block works with a variety of tools. Solid black nickel-plated brass construction ensures reliable power flow, and an impact-resistant polycarbonate cover keeps the fuses and connections clean.
Fuses sold separately.
Features:
One (1) 1/0 to 4 AWG in to two (2) 4/8 AWG out
TPE wrapped soft touch
Dual sizes gasket set
Water-resistant
Solid brass construction
Black nickel finish
T20 Torx® screws
Gate Lock technology
In the Box:
One distribution block for mini-ANL fuses with one (1) 4 or 1/0 AWG set-screw input and two (2) 4/8 AWG set-screw outputs
Plastic cover (attached)
3 Rubber grommets and sleeves (pre-installed)
*Sold as an Individual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
23.03 |
|
|
VFDB4 MANL 4 Position Distribution Block with Cover
This compact distribution block from T-Spec will handle the high-current power distribution for your single source to four (4) smaller gauge power wires, ensuring that your wiring's connected securely, looking neat, and safely fused. T-spec's Universal Screw Design for securing the wires and mini ANL fuses to the block works with a variety of tools. Solid black nickel-plated brass construction ensures reliable power flow, and an impact-resistant polycarbonate cover keeps the fuses and connections clean.
Fuses sold separately.
Features:
One (1) 1/0 to 4 AWG into four (4) 4/8 AWG out
TPE wrapped soft touch
Dual sizes gasket set
Water-resistant
Solid brass construction
Black nickel finish
T20 Torx® screws
Gate Lock technology
In the Box:
One distribution block for mini-ANL fuses with one (1) 4 or 1/0 AWG set-screw input and four (4) 4/8 AWG set-screw outputs
Plastic cover (attached)
3 Rubber grommets and sleeves (pre-installed)
*Sold as an Individual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
29.75 |
|
|
5025 ST Blade Fuse Block with Cover - 6 Circuit with Negative Bus
Features:
Clear insulating cover with label recesses accept Small Format Labels
Cover Satisfies ABYC/USCG requirements for insulation
Tin-plated copper buses and fuse clips give 30 Amperes rating per circuit
Accepts ATO and ATC fast acting blade fuses
20 write-on circuit labels included
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
39.28 |
|
|
5026 ST Blade Fuse Block with Cover - 12 Circuit with Negative Bus
Features:
Clear insulating cover with label recesses accept Small Format Labels
Cover Satisfies ABYC/USCG requirements for insulation
Tin-plated copper buses and fuse clips give 30 Amperes rating per circuit
Accepts ATO and ATC fast acting blade fuses
20 write-on circuit labels included
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
50.78 |
|
|
5133 ANL Fuse - 300AMP
Features:
Ignition protected (conforming to SAE J1171)- safe for installation aboard gasoline powered boats
Silver-plated connector blades for corrosion resistance
Visible indication of blown condition
6,000 Ampere Interrupt Capacity (AIC) satisfies ABYC requirements for main DC circuit protection on large battery banks
For use with Blue Sea Systems' ANL Fuse Blocks
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
22.79 |
|
|
ST Blade Compact Fuse Blocks - 4 Circuits w/Cover
Provides surface mount circuit protection for ATO®/ATC® Fuses in a compact footprint. The single side design allows wire entry from one side to maximize space.
Compact common source fuse block
Accepts ATO® and ATC® fast acting blade fuses
Single side entry wiring
Ignition Protected-meets ISO 8846 and SAE J1171 for use in a gasoline engine compartment
Insulating cover meets ABYC/USCG insulation requirements
Tin-plated copper buses and fuse clips
Accepts ring or snap fork type terminals
Small format standard and custom labels available
Specifications
Circuits:4
Maximum Amperage: 100A per block / 30A per circuit
Maximum Voltage:32V DC
Mounting: #8 Screw (M4)
Screw Terminal Torque:#8-32 Screws with captive star lock washer in-lb (0 Nm)
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
25.13 |
|
|
ST Blade Compact Fuse Blocks - 8 Circuits w/Cover
Provides surface mount circuit protection for ATO®/ATC® Fuses in a compact footprint. The single side design allows wire entry from one side to maximize space.
Compact common source fuse block
Accepts ATO® and ATC® fast acting blade fuses
Single side entry wiring
Ignition Protected-meets ISO 8846 and SAE J1171 for use in a gasoline engine compartment
Insulating cover meets ABYC/USCG insulation requirements
Tin-plated copper buses and fuse clips
Accepts ring or snap fork type terminals
Small format standard and custom labels available
Specifications
Circuits:8
Maximum Amperage: 100A per block / 30A per circuit
Maximum Voltage:32V DC
Mounting: #8 Screw (M4)
Screw Terminal Torque:#8-32 Screws with captive star lock washer in-lb (0 Nm)
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
40.00 |
|
|
5503
Cover included
Accepts 5/16" (M8) ring terminals
For use on systems up to 32 Volts DC
Swing out design allows replacement of the fuse without removing fasteners
Stainless steel studs provide resistance to corrosion and high torquing for excellent electrical contact
UL 94-V0 base resists high heat
Insert molded studs ensure secure fuse mounting
Insulating cover satisfies ABYC/USCG requirements
Cover breakouts allow wire access in any direction
Fuse sold separately
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
47.47 |
|
|
ST Blade Fuse Block w/o Cover - 6 Circuit w/o Negative Bus
Part# 5037
Can be used for 24-hour circuits
Fuse blocks with covers include 20 write-on circuit labels
Tin-plated copper buses and fuse clips
Accepts ring or spade type terminals
Accepts ATO® and ATC® fast acting blade fuses
Fuses sold separately
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
31.91 |
|