|
Starlink Wedge Base & Lighting Kit - White
This Seaview wedge base kit caters to installations with restricted space, where additional height isn't required, yet an LED navigation light remains essential.
This kit comes with all the Seaview parts necessary to install the Starlink Flat High-Performance antenna on the 8° wedgebase, along with the 3NM LED combination mast head all-round light. The LED light is IP67 watertight with 7' of wire (12v) and USCG-approved for boats up to 20 meters (65.6') in length.
The aluminum light bar and 8° wedge base for the Starlink Flat High-Performance antenna have been specifically designed for the marine environment (3-part polyurethane prime and powder coat to ensure the best possible finish and corrosion resistance).
Wedge Base Features:
Designed to fit the Starlink Flat High-Performance Antenna and Seaview SRM200W Mount for the Gen 3 Standard Starlink Antenna.
Pre-drilled mounting holes allow the hardware to fasten directly to the wedge.
Drilled and tapped for the CG30PW (white) or CG30PB (black) cable seal that comes with each Seaview wedge base.
No need to cut the Starlink connectors for installation
Included Items:
ADAR1DMLTB - Top Plate
SVSLWB - Wedge Base
LTBR - Light Bar
LTBLED12 - Navigation Light
|
700.80 |
|
|
Starlink Wedge Base & Lighting Kit - Black
This Seaview wedge base kit caters to installations with restricted space, where additional height isn't required, yet an LED navigation light remains essential.
This kit comes with all the Seaview parts necessary to install the Starlink Flat High-Performance antenna on the 8° wedgebase, along with the 3NM LED combination mast head all-round light. The LED light is IP67 watertight with 7' of wire (12v) and USCG-approved for boats up to 20 meters (65.6') in length.
The aluminum light bar and 8° wedge base for the Starlink Flat High-Performance antenna have been specifically designed for the marine environment (3-part polyurethane prime and powder coat to ensure the best possible finish and corrosion resistance).
Wedge Base Features:
Designed to fit the Starlink Flat High-Performance Antenna and Seaview SRM200W Mount for the Gen 3 Standard Starlink Antenna.
Pre-drilled mounting holes allow the hardware to fasten directly to the wedge.
Drilled and tapped for the CG30PW (white) or CG30PB (black) cable seal that comes with each Seaview wedge base.
No need to cut the Starlink connectors for installation.
Included Items:
ADAR1DMLTBBLK - Top Plate
SVSLWBBLK - Wedge Base
LTBRBLK- Light Bar
LTBLED12BLK - Navigation Light
|
700.80 |
|
|
Gen 3 Standard Starlink Antenna Mount with 8 Degree Wedge Base
The Seaview SRM200W Mount for the Gen 3 Standard Starlink Antenna (sometimes Gen 4 / Standard) has been specifically designed for the harsh marine environment. If it's good for the marine environment then it's ideal for any other outdoor application (RVs, overland vehicles, vans, jeeps, side-by-side, UTV, trucks, etc.). The base aluminum plate has a 3 part polyurethane prime and powder coat and the end pieces are made using machined marine-grade high-density polyethylene to ensure the best possible finish and corrosion resistance.
The Gen 3 Standard Starlink Antenna (sometimes Gen 4 / Standard) now features a convenient pressure-fit kickstand for placement on flat non-mobile surfaces. However, marine or vehicle mounting necessitates additional support. Opting for the Seaview SRM200W Mount is a superior choice, offering a reliable and adaptable mounting solution. You have the option to utilize through-bolts for a permanent fixture through machined holes in the mount's base or pair it with the Seaview 8° Wedge base for a highly versatile installation.
*The SRM200W can be mounted directly or it can be mounted to the Starlink 8° Wedge Base (SVSLWB).
Wedge Base Features:
Designed to fit the Starlink Flat High-Performance Antenna and Seaview SRM200W Mount for the Gen 3 Standard Starlink Antenna.
Pre-drilled mounting holes allow the hardware to fasten directly to the wedge.
Drilled and tapped for the CG30PW (white) or CG30PB (black) cable seal that comes with each Seaview wedge base.
No need to cut the Starlink connectors for installation.
Available in white or black
|
686.40 |
|
|
Starlink Maritime Top Plate for Seaview M1 & M2 Style Modular Mounts
Seaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics.
Features:
Starlink Wedge Base hole pattern pre-dimpled in this modular top plate
Water-tight gasket in the center of the plate to pass the Starlink cable
The 1” thick starboard plate can accommodate a Seaview light bar
|
168.00 |
|
|
Starlink High Performance 5" Pedestal Mount with ADASTLKA Starlink Top Plate
Seaview offers 5", 10", 16", 24" & 36" tall pedestals for Starlink's high-performance terminals, such as Maritime and In-Motion RV.
Pair your Seaview pedestal mount with the new Starlink-compatible top plate (ADASTLKA) for a clean and sleek installation of your Starlink high-performance terminal.
Features:
Powder-coated aluminum pedestal mount.
The top of the pedestal has a modular top that can fit the Starlink wedge base.
*The ADASTLKA top plate cannot support a light bar
|
403.20 |
|
|
Starlink High Performance 10" Pedestal Mount with ADASTLKA Starlink Top Plate
Seaview offers 5", 10", 16", 24" & 36" tall pedestals for Starlink's high-performance terminals, such as Maritime and In-Motion RV.
Pair your Seaview pedestal mount with the new Starlink-compatible top plate (ADASTLKA) for a clean and sleek installation of your Starlink high-performance terminal.
Features:
Powder-coated aluminum pedestal mount.
The top of the pedestal has a modular top that can fit the Starlink wedge base.
*The ADASTLKA top plate cannot support a light bar
|
465.60 |
|
|
Starlink High Performance 16" Pedestal Mount with ADASTLKA Starlink Top Plate
Seaview offers 5", 10", 16", 24" & 36" tall pedestals for Starlink's high-performance terminals, such as Maritime and In-Motion RV.
Pair your Seaview pedestal mount with the new Starlink-compatible top plate (ADASTLKA) for a clean and sleek installation of your Starlink high performance terminal.
Features:
Powder-coated aluminum pedestal mount.
The top of the pedestal has a modular top that can fit the Starlink wedge base.
*The ADASTLKA top plate cannot support a light bar
|
513.60 |
|
|
Starlink High Performance 24" Pedestal Mount with ADASTLKA Starlink Top Plate
Seaview offers 5", 10", 16", 24" & 36" tall pedestals for Starlink's high-performance terminals, such as Maritime and In-Motion RV.
Pair your Seaview pedestal mount with the new Starlink-compatible top plate (ADASTLKA) for a clean and sleek installation of your Starlink high-performance terminal.
Features:
Powder-coated aluminum pedestal mount.
The top of the pedestal has a modular top that can fit the Starlink wedge base.
*The ADASTLKA top plate cannot support a light bar
|
609.60 |
|
|
Starlink High Performance 36" Pedestal Mount with ADASTLKA Starlink Top Plate
Seaview offers 5", 10", 16", 24" & 36" tall pedestals for Starlink's high-performance terminals, such as Maritime and In-Motion RV.
Pair your Seaview pedestal mount with the new Starlink-compatible top plate (ADASTLKA) for a clean and sleek installation of your Starlink high-performance terminal.
Features:
Powder-coated aluminum pedestal mount.
The top of the pedestal has a modular top that can fit the Starlink wedge base.
*The ADASTLKA top plate cannot support a light bar
|
710.40 |
|
|
Starlink High Performance 5" Pedestal Mount with ADASTLKA Starlink Top Plate - Black
Seaview offers 5", 10", 16", 24" & 36" tall pedestals for Starlink's high-performance terminals, such as Maritime and In-Motion RV.
Pair your Seaview pedestal mount with the Starlink-compatible top plate (ADASTLKA) for a clean and sleek installation of your Starlink high-performance terminal.
Features:
Powder-coated aluminum pedestal mount.
The top of the pedestal has a modular top that can fit the Starlink wedge base.
*The ADASTLKA top plate cannot support a light bar
|
403.20 |
|
|
Starlink Maritime Black Top Plate for Seaview M1 & M2 Style Modular Mounts
Seaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "Swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics.
Features:
Starlink Wedge Base hole pattern pre-dimpled in this modular top plate
Water-tight gasket in the center of the plate to pass the Starlink cable
The 1” thick starboard plate can accommodate a Seaview light bar
|
168.00 |
|
|
Aluminum 8° Wedge Base for Starlink Flat High-Performance Antenna - White
The Seaview Aluminium 8° Wedge Base for the Starlink Flat High-Performance antenna has been specifically designed for the marine environment (chem-treated with a 3-part polyurethane prime and powder coat to ensure the best possible finish and corrosion resistance).
*This wedge base is a direct replacement for the gray wedge base that comes with the Starlink antenna.
Features:
Designed to fit the Starlink Flat High-Performance Antenna.
Pre-drilled mounting holes allow the hardware to fasten directly to the wedge.
Drilled and tapped for the cable seal that is already provided with the Starlink antenna.
No need to cut the Starlink connectors for installation.
Pre-drilled with the Seaview modular top hole pattern for the option to fit on top of any Seaview modular mount.
|
254.40 |
|
|
Aluminum 8° Wedge Base for Starlink Flat High-Performance Antenna - Black
The Seaview Aluminium 8° Wedge Base for the Starlink Flat High-Performance antenna has been specifically designed for the marine environment (chem-treated with a 3-part polyurethane prime and powder coat to ensure the best possible finish and corrosion resistance).
*This wedge base is a direct replacement for the gray wedge base that comes with the Starlink antenna.
Features:
Designed to fit the Starlink Flat High-Performance Antenna.
Pre-drilled mounting holes allow the hardware to fasten directly to the wedge.
Drilled and tapped for the cable seal that is already provided with the Starlink antenna.
No need to cut the Starlink connectors for installation.
Pre-drilled with the Seaview modular top hole pattern for the option to fit on top of any Seaview modular mount.
|
254.40 |
|
|
Gen 3 Standard Starlink Antenna Mount
The Seaview SRM200W Mount for the Gen 3 Standard Starlink Antenna (sometimes Gen 4 / Standard) has been specifically designed for the harsh marine environment. If it's good for the marine environment then it's ideal for any other outdoor application (RVs, overland vehicles, vans, jeeps, side-by-side, UTV, trucks, etc.). The base aluminum plate has a 3 part polyurethane prime and powder coat and the end pieces are made using machined marine-grade high-density polyethylene to ensure the best possible finish and corrosion resistance.
The Gen 3 Standard Starlink Antenna (sometimes Gen 4 / Standard) now features a convenient pressure-fit kickstand for placement on flat non-mobile surfaces. However, marine or vehicle mounting necessitates additional support. Opting for the Seaview SRM200W Mount is a superior choice, offering a reliable and adaptable mounting solution. You have the option to utilize through-bolts for a permanent fixture through machined holes in the mount's base or pair it with the Seaview 8° Wedge base for a highly versatile installation.
*The SRM200W can be mounted directly or it can be mounted to the Starlink 8° Wedge Base (SVSLWB).
|
432.00 |
|
|
1-1/4" Light Bar for Closed Domes Requires LTB Top - Black
Seaview light bars are made from aluminum and powder coated brilliant white and are compatible with Seaview Modular Mounts. These light bars are 1.25" in diameter. Different styles of light are available as well as numerous accessories for your light bar. Accessories such as LED anchor lights, GPS adapters, wind transducer adapters and etc. What's also unique with Seaview light bars is that they can fold over 90° to allow for extra height clearance.
Many Styles
There are many different styles of Seaview light bars so you can be sure to get one that will work with your specific application. Styles for closed dome radars, satellite domes, open array radars and cameras/search lights.
Extra Height Clearance
On select Seaview light bar models some can fold over 90° to allow for extra height clearance. Simply loosen the four bolts around the stainless steel clamp and fold over in either direction. Only LTB-R, LTB-S and LTB-S24 can fold over.
Easy Installation
Secured with a stainless steel clamp, simply use the supplied four bolts. This does not apply to the LTB-SF, LTB-OA and LTB-OA-6 light bars.
|
129.60 |
|