|
RAM® Tab-Lock™ Tablet Holder for 10" Tablets with Case + More
The RAM® Tab-Lock™ spring-loaded, quick-release cradle with a keyed lock offers a secure fit with easy access to the mounted tablet. The keyed lock offers theft deterrence and unwanted tampering in public settings. The interchangeable cup ends are designed specifically for the Samsung Galaxy Tab 4 10.1 and Tab S 10.5 with an Otterbox Defender case, but also support many other tablet models and industrial tablet PCs. The spring-loaded design makes it easy to insert and remove your tablet, along with keeping it secure in mobile applications. The custom end cups are designed to optimize the functionality of your tablet, enabling access to all ports and tablet functions. The included back plate is interchangeable with various-size support cups, making it compatible with numerous tablet models. The detachable support cups are the only components needed for purchase, attach to the back plate for support of your new tablet. A set of four nuts and bolts is included to connect the cradle to any RAM components or mounts that contain the universal AMP hole pattern. The Tab-Lock™ cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size. The product consists of a holder only. Case not included.
Features:
Locking mechanism for theft deterrence
Support cups contain open slots to accommodate tablets of various sizes
The back plate can support various sizes of cups
Spring-loaded tension provides secure support and quick release for your tablet
Backed by a lifetime warranty
Specifications:
Hardware Included: Assembly Hardware, (2) #8 x 5/8" Sheet Metal Screws, (2) M4 x 32mm Machine Screws, (2) M4 Nylock Nuts, (2) Keys
Holder Dimensions: Height Range: 9.64" - 12.32", Width Range: 6.13" - 7.4", Depth Range: .13" - .7"
Hole Pattern: 4-Hole AMPS: 1.181" x 1.496"
Materials: High-strength composite
Packaging Type: Poly Bag
Weight: 1.25 lbs
|
65.87 |
|
|
Universal X-Grip Holder f/12" Tablets
The new RAM X-Grip line of products just got bigger and better. This new model is just what you've been looking for to hold your favorite tablet. Just like the devices it was made for, it is everything you need and nothing you don't. Simple to open and close, the spring loaded RAM X-Grip leaves the outside edge of your tablet almost completely free of annoying obstructions. Soft rubber fingers apply just enough force to keep your tablet in safe and secure. Compatible with a wide range of mounting solutions, your tablet is sure to find a home no matter where your travels take you.
The RAM-HOL-UN11U holder expands and contracts for perfect fit of most 10" and 12" tablets with or without sleeves, as well as some smaller tablets. This holder by RAM consists of a composite spring loaded holder, expandable grip arms and additional bottom support keeper.
** The RAM-HOL-UN11U is compatible with the iPad Pro WITHOUT CASE ONLY. **
Compatible Devices (WITH OR WITHOUT CASE):
Microsoft Surface Pro 3
Samsung Galaxy Note® Pro 12.2
Most 12" Screen Tablets
X-Grip Holder Dimensions:
Minimum Width = 7.25"
Maximum Width = 8.75"
Maximum Length (WITHOUT additional supports) = Unlimited
Maximum Length (WITH additional supports) = 10.25"
Depth = 0.875"
X-Grip Holder Features:
Spring loaded cradle expands and contracts for perfect fit of your tablet
Rubber coated tips will hold your tablet firm and stable
Versatility of cradle allows for attachment to many 1" socket mounts
Socket technology allows for multiple adjustment angles and articulation of your tablet
Easy access grip knobs, located on the back of the cradle for quick release of your tablet
Multiple mounting access points on the back of the cradle
Additional support keeper at the bottom of the cradle
Full access to all ports
Lifetime warranty
Made in the U.S.A.
Material:
Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite
Note:
The "U" in the part number reflects product packaged in poly bag.
|
74.69 |
|
|
RAM Pod I Universal No-Drill Vehicle Mount w/Universal X-Grip III Holder f/Large Tablets
The RAM-B-316-1-UN9 consists of the RAM POD I universal No-Drill® vehicle base, 18" rigid aluminum rod, socket system and universal X-Grip® III clamping cradle for 10" tablets. The base of the mount connects to your seat rail without any drilling necessary. The 18" rigid aluminum rod can be bent to position your device to its optimum viewing location. The X-Grip® III clamping cradle consists of a composite spring loaded cradle, expandable grip arms and additional bottom support keeper. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The X-Grip® III clamping cradle expands and contracts for perfect fit of most 10" tablets with or without sleeves, as well as some smaller tablets. Please verify dimensions of your tablet below for compatibility with the X-Grip® III.
The RAM X-Grip® III cradle is compatible with the following tablets WITH OR WITHOUT CASE:
Apple iPad Air
Apple iPad 4 (With Lightning Connector)
Apple iPad 3
Apple iPad 2
Apple iPad 1
HP TouchPad
Asus EEE Pad
Asus Eee Pad Transformer
Lenovo LePad Slate & IdeaTab Lynx
LG G-Slate
LG Optimus Pad
Microsoft Surface
Motorola XOOM
Motorola XYBOARD 10.1
Samsung Galaxy Tab 8.9
Samsung Galaxy Tab 10.1
Samsung Galaxy Tab 2 10.1
Samsung Galaxy Tab 3 10.1
Toshiba Thrive
Most 10" Screen Tablets
X-Grip® III Cradle Features:
1. Spring loaded cradle expands and contracts for perfect fit of your tablet
2. Rubber coated tips will hold your tablet firm and stable
3. Versatility of cradle allows for attachment to many 1" socket mounts
4. Socket technology allows for multiple adjustment angles and articulation of your tablet
5. Easy access grip knobs, located on the back of the cradle for quick release of your tablet
6. Multiple mounting access points on the back of the cradle
7. Additional support keeper at the bottom of the cradle
8. Full access to all ports
9. Lifetime warranty
Material:
Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite
Note:
The RAM-B-316-1-UN9 is not compatible with the Apple iPad with LIFEPROOF NUUD CASE
|
116.17 |
|
|
RAM Universal Large Tab-Tite Holder f/10" Screen Tablets
Part #: RAM-HOL-TAB-LGU
Get the most out of your tablet with the Universal RAM Tab-Tite™ cradle. With 2 sets of interchangeable cup ends, ranging from different sizes and features, you can fit the holder to your tablet for a near custom fit. This spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. Perfect for stationary or on the go applications, this new RAM product is just what you need to get the most out of your mobile device.
The Tab-Tite™ is compatible with the following tablets WITH OR WITHOUT SKINS, SLEEVES OR CASES:
Apple iPad & iPad 2
Asus EEE Pad
Asus Eee Pad Transformer
HP TouchPad
Lenovo LePad Slate
LG G-Slate
LG Optimus Pad
Motorola XOOM
Pandigital R90A200
Samsung Galaxy 10.1
Toshiba Thrive
Most 10" Screen Tablets
Included With Purchase:
(1) Spring loaded back plate
(2) Support cups for thin tablets
(2) Support cups for wide tablets
Mounting hardware
The Tab-Tite™ cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet with a case/sleeve/skin when determining the overall size.
Cradle Dimensions:
Height: 8.5" minimum to 10.75" maximum
Width: Maximum to 7.75"
Edge Depth: Maximum to 0.56"
Cradle Dimensions:
Height: 8.25" minimum to 10.75" maximum
Width: Maximum to 6.8"
Edge Depth: Maximum to 0.50"
Features:
1. Support cups contain open slots to accommodate for tablets of various sizes
2. Back plate can support various size support cups
3. Spring loaded tension provides secure support for your tablet
4. Spring loaded cradle allows for quick release of your tablet
5. Full access to all ports
Material:
High Strength Composite
|
34.40 |
|
|
Tab-Lock™ Locking Cradle f/Apple iPad mini 1-3 with Case, Skin & Sleeve
The RAM-HOL-TABL12U consists of a spring loaded backplate, custom support cups and locking mechanism for the iPad mini WITH skin, sleeve or case. This spring loaded design makes it easy to load and unload your iPad mini, along with keeping it secure while on the go. Cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your iPad mini can be used just as it was intended. Quickly lock the cradle, keeping your iPad mini secure and safe from theft. Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern.
The included back plate is interchangeable with various size support cups, making it compatible with numerous tablet models. New detachable support cups are the only components needed for purchase, attach to the back plate for support of your new tablet.
The Tab-Lock™ cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size.
Cradle Dimensions:
Height: 6.75" to 8.75"
Width: 5.06" to 5.68"
Depth: 0.13" to 1"
Note: Product consists of holder only. Case not included.
Features:
1. Locking mechanism for theft deterrence
2. Support cups contain open slots to accommodate for tablets of various sizes
3. Back plate can support various size support cups
4. Spring loaded tension provides secure support for your tablet
5. Spring loaded cradle allows for quick release of your tablet
6. High strength materials maximize longevity of cradle
7. Full access to all ports
8. Lifetime warranty
Material:
High Strength Composite
Note:
The "U" in the part number reflects product packaged in poly bag. The RAM-HOL-TABL12U is not compatible with the iPad mini 1-3 with LifeProof case.
Weight: 1.15 lbs.
|
63.55 |
|
|
RAM Universal SMALL Tab-Tite Holder for 7" Screen Tablets including the Samsung Galaxy, Dell Streak 7 & BlackBerry PlayBook
Now that you've got the right Tab for the job, you are going to need the right mounting system. Get the most out of your tablet with the Universal RAM Tab-Tite cradle. With 3 sets of interchangeable cup ends, ranging from different sizes and features, you can fit the holder to your tablet for a near custom fit. This spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, USB, power, and other ports, your tablet can be used just as it was intended. Perfect for stationary or on the go applications, this new RAM product is just what you need to get the most out of your mobile device.
The Tab-Tite is compatible with the following tablets WITH OR WITHOUT SKINS, SLEEVES OR CASES:
Archos 7
Asus EEE Pad Memo
Barnes & Noble NOOKcolor
BlackBerry PlayBook
Dell Streak 7
HTC Flyer
Samsung Galaxy
Included With Purchase:
(1) Spring loaded back plate
(2) Support cups for thin tablets with no skins
(2) Support cups for thin tablets with thin or no skins
(2) Support cups for thick tablets with cases
Mounting hardware
The Tab-Tite cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet with a case/sleeve/skin when determining the overall size.
Cradle Dimensions:
Height: 7.3" minimum to 9.62" maximum
Width: Maximum width to 5.31"
Depth: 1.06" maximum
Cradle Dimensions:
Height: 6.80" minimum to 9" maximum
Width: Maximum width to 5.31"
Depth: 0.125" minimum to 0.56" maximum
Cradle Dimensions:
Height: 5" minimum to 9.1" maximum
Width: Maximum width to 4.70"
Depth: 0.125" minimum to 0.44" maximum
Features:
1. Support cups contain open slots to accommodate for tablets of various sizes
2. Back plate can support various size support cups
3. Spring loaded tension provides secure support for your tablet
4. Spring loaded cradle allows for quick release of your tablet
5. Full access to all ports
Material:
High Strength Composite
Note:
The "U" in the part number reflects product packaged in poly bag. Diamond base adapter not included with purchase.
|
31.75 |
|
|
RAM Tab-Lock Universal Locking Cradle f/Apple iPad w/LifeProof & Lifedge Cases
The RAM-HOL-TABL17U consists of a spring loaded back plate, custom support cups and locking mechanism. This spring loaded design makes it easy to load and unload your iPad, along with keeping it secure while on the go. Cup ends are designed to optimize the functionality of your iPad, allowing access to audio jacks, usb, power, and other ports, your iPad can be used just as it was intended. Quickly lock the cradle, keeping your iPad secure and safe from theft.
The RAM Tab-Lock cradle is compatible with the following tablets:
10" Screen Tablets with LifeProof nüüd cases
10" Screen Tablets with Lifedge cases
10" Screen Tablets with heavy duty cases
Tab-Lock Cradle Dimensions:
Height: 8.75" minimum to 10.75" maximum
Width: maximum to 8.25"
Depth: maximum to 1.1"
Tab-Lock Cradle Features:
1. Locking mechanism for theft deterrence
2. Support cups contain open slots to accommodate for tablets of various sizes
3. Back plate can support various size support cups
4. Spring loaded tension provides secure support for your tablet
5. Spring loaded cradle allows for quick release of your tablet
6. High strength materials maximize longevity of cradle
7. Full access to all ports
8. Lifetime warranty
Material:
High Strength Composite
Note:
The "U" in the part number reflects product packaged in poly bag.
|
66.66 |
|
|
RAM Mount Tab-Tite™ Cradle for the Apple iPad Air 1-2 & 9.7" Tablets w/Case, Skin or Sleeve
Get the most out of your tablet with the RAM Tab-Tite™ spring loaded, quick release cradle. With interchangeable cup ends, you can fit the cradle to your tablet for a near custom fit. This spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. Perfect for stationary or on the go applications, this new RAM product is just what you need to get the most out of your tablet. Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern.
The Tab-Tite™ cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size.
Features:
Support cups contain open slots to accommodate for devices of various sizes, including tablets in protective sleeves
Back plate can support various size support cups
Spring loaded tension provides secure support for your tablet
Spring loaded cradle allows for quick release of your tablet
Full access to all ports
Material:High Strength Composite
Note:The "U" in the part number reflects product packaged in poly bag.
Weight:0.65 lbs.
|
27.61 |
|
|
GDS® Locking Vehicle Dock for Apple iPad mini 4
The RAM® vehicle dock with GDS Technology™ is a spring loaded, quick release cradle that offers a secure fit with easy access to the mounted tablet. This docking station is compatible with the Apple iPad mini 4 with IntelliSkin®.
The integrated GDS Technology™ platform enables data and charging capabilities to the mounted tablet. Without the need to remove the IntelliSkin from the device, the user can quickly and efficiently mount the device in the vehicle dock and keep the device charged.
Compatible Devices:
Apple iPad mini with IntelliSkin®
Note: This version of the GDS® vehicle dock is not recommended for light, medium or heavy duty commercial vehicles. For these use cases, please use the RAM-GDS-DOCKL-V2-AP7U.
Features:
GDS Technology™ offers a universal charging platform for any device wrapped in IntelliSkin®
Modular design makes upgrading to a new tablet simple and cost effective
Keyed lock for theft deterrence
Easy, quick release of your tablet for on-the-go applications
Versatility of holder allows for attachment to many RAM mounting solutions
Lifetime warranty, 3 year on electronics
Made in U.S.A.
Specifications:
Max power: 5V-12V @ 2A*
Material: High Strength Composite
Weight: 1.2469 lbs.
*mUSB products supporting USB 2.0/3.0 will have a max current of 1.5A
|
110.12 |
|
|
RAM Mount Universal X-Grip Holder Diamond Base Surface Mount
Part #: RAM-B-102-UN7U
The RAM-B-102-UN7U consists of a double socket arm, diamond base and universal spring loaded X-Grip™ holder for cell phones. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at the both ends of the socket arm; this with a twist of the arm knob, allows you can move the suction cup X-Grip™ mount to your optimum viewing position. The spring loaded X-Grip™ holder expands and contracts, allowing for a perfect custom fit of your cell phone.
Sometimes, its all about the design. If you are looking for a compact mount for your cell phone without that cookie cutter shape, you've found it. The RAM X-Gripȁ has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The perfect compliment to the modern sleek interior of today's vehicles, the RAM X-Grip™ is the cell phone holder evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant holder is ready to compliment your phone and become the most useful accessory in your vehicle.
Compatible Devices:
Apple iPhone 4S WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone 4 WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone 3G WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone 3 WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone (1st Generation)
Apple iPod touch (All Models)
Apple iPod (G1-G5)
All devices that maintain the following dimensions below:
Holder Dimensions:
Minimum Width = 0.875"
(Devices at 0.875" must be a minimum of 4" in height to fit into holder)
Maximum Width = 3.25"
Depth = 0.875"
Features:
1. Spring loaded holder expands and contracts for perfect fit of your device 2. Rubber coated tips will hold device firm and stable
3. Versatility of holder allows for attachment to many RAM-to-RAM ball mounts
4. Single socket technology allows for multiple adjustment angles and articulation of device
Material:
High Strength Composite, Rubber Tips & Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
48.52 |
|
|
RAM Mount Universal X-Grip™ Holder Handlebar Rail Mount
Part #: RAM-B-149Z-UN7U
The RAM-B-149Z-UN7U consists of a double socket arm, handlebar rail mount with zinc coated u-bolt base and universal spring loaded X-Grip™ holder for cell phones. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at the both ends of the socket arm; this with a twist of the arm knob, allows you can move the suction cup X-Grip™ mount to your optimum viewing position. The spring loaded X-Grip™ holder expands and contracts, allowing for a perfect custom fit of your cell phone.
Sometimes, its all about the design. If you are looking for a compact mount for your cell phone without that cookie cutter shape, you've found it. The RAM X-Gripȁ has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The perfect compliment to the modern sleek interior of today's vehicles, the RAM X-Grip™ is the cell phone holder evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant holder is ready to compliment your phone and become the most useful accessory in your vehicle.
Compatible Devices:
Apple iPhone 4S WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone 4 WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone 3G WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone 3 WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone (1st Generation)
Apple iPod touch (All Models)
Apple iPod (G1-G5)
Samsung Galaxy S7
Samsung Galaxy S7 Edge
All devices that maintain the following dimensions below:
Holder Dimensions:
Minimum Width = 0.875"
(Devices at 0.875" must be a minimum of 4" in height to fit into holder)
Maximum Width = 3.25"
Depth = 0.875"
Features:
1. Spring loaded holder expands and contracts for perfect fit of your device
2. Rubber coated tips will hold device firm and stable
3. Versatility of holder allows for attachment to many RAM-to-RAM ball mounts
4. Single socket technology allows for multiple adjustment angles and articulation of device
Material:
High Strength Composite, Rubber Tips & Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
58.96 |
|
|
Ram Pin-Lock™ Security Kit f/ 1" B Size Mounts and Gimbal Brackets
You make a significant investment in the equipment you purchase to make your job or hobby easier or more enjoyable. Whether it's a high end piece of marine electronics, a GPS for your motorcycle, or a tablet used for business purposes, you need to protect your investment. RAM® Mounts protect your device from harmful shock and vibration, but what about theft and tampering? RAM® offers a full suite of security products which protect your device while mounted on your RAM® mount from theft and unwanted tampering. Simply add a security knob or nut to your RAM Mount to deter would-be thieves from targeting your equipment. RAM® security solutions are also a great way to add tamper resistance to your RAM® Mount in situations where there is a desire to prevent end-users from adjusting the mount or removing the device. High strength composite and brass construction assures a long life of trouble free use in a wide variety of environments including marine and salt water.
|
19.33 |
|
|
RAM Mount Universal X-Grip Holder Composite Surface Mount
Part #: RAP-B-138-UN7
The RAP-B-138-UN7 consists of a double socket arm, 2.5" round base base and universal spring loaded X-Grip™ holder for cell phones. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at the both ends of the socket arm; this with a twist of the arm knob, allows you can move the suction cup X-Grip™ mount to your optimum viewing position. The spring loaded X-Grip™ holder expands and contracts, allowing for a perfect custom fit of your cell phone.
Compatible Devices:
Apple iPhone 4S WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone 4 WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone 3G WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone 3 WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone (1st Generation)
Apple iPod touch (All Models)
Apple iPod (G1-G5)
All devices that maintain the following dimensions below:
Holder Dimensions:
Minimum Width = 0.875"
(Devices at 0.875" must be a minimum of 4" in height to fit into holder)
Maximum Width = 3.25"
Depth = 0.875"
Features:
1. Spring loaded holder expands and contracts for perfect fit of your device
2. Rubber coated tips will hold device firm and stable
3. Versatility of holder allows for attachment to many RAM-to-RAM ball mounts
4. Single socket technology allows for multiple adjustment angles and articulation of device
Material:
High Strength Composite, Rubber Tips & Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
|
42.65 |
|
|
RAM Mount Universal X-Grip Holder Yoke Glare Mount
Part #: RAP-B-121-UN7U
RAM Composite Clamp Mount with Universal X-Grip™ Holder. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. High quality composite materials insure your device is safe, secure, and within easy reach. The clamp base fits a rail or edge lip from 0.625" to a maximum of 1.25". The mounting base can also accept a second ball giving you the ultimate double ball base. Extra ball not included with purchase of this mount.
Compatible Devices:
Apple iPhone 4S WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone 4 WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone 3G WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone 3 WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone (1st Generation)
Apple iPod touch (All Models)
Apple iPod (G1-G5)
All devices that maintain the following dimensions below:
Holder Dimensions:
Minimum Width = 0.875"
(Devices at 0.875" must be a minimum of 4" in height to fit into holder)
Maximum Width = 3.25"
Depth = 0.875"
Features:
1. Spring loaded holder expands and contracts for perfect fit of your device
2. Rubber coated tips will hold device firm and stable
3. Versatility of holder allows for attachment to many RAM-to-RAM ball mounts
4. Single socket technology allows for multiple adjustment angles and articulation of device
Material:
High Strength Composite, Rubber Tips & Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
|
53.62 |
|
|
Ram Mixed Combination Pin-Lock™ Security Knob, Stud and Key Knob f/ Gimbal Brackets
The RAM® Gimbal Security Knob is a great solution for securing your gimbal mounted electronics, whether or not it's mounted on a RAM®. The universal design utilizes various stud sizes to accommodate most popular GPS, chart plotter, fish finder and VHF radio brands. With a simplistic design, our security knob is extremely affordable and simple to install. Pair this with a security knob for your RAM® mount and you can feel at ease when leaving your expensive electronics in public places without the concern of theft or tampering.
** Multiple key configurations for security purposes **
|
12.05 |
|