Paddle Keeper Kit Add or replace paddle holders with the YakGear Paddle Keeper Kit. While there are many ways to mount and store paddles on kayaks and canoes, bungee paddle keepers are by far the most versatile. A 1/4-inch bungee is mounted with terminal ends and a J-hook to form a pressure-based bungee clamp for paddles, fishing poles, and anchor sticks. This kit comes with two paddle keepers, so the versatility and practicality of the product will not be limited to one side of the kayak or canoe. As always, this complete kit comes with all stainless-steel installation hardware, installation instructions, and rigging tips from YakGear. Waterproof silicone is recommended but not included. Features: Paddle keepers can be used to store an assortment of items Made of 1/4-in. nylon bungee, it attaches to a vessel using terminal ends and sleeves Each kit comes with two paddle keepers Installation instructions and hardware are included 1-year warranty

Paddle & Pole Keeper Kit This Paddle & Pole Keeper Kit lets you easily store your pole or paddle and frees up your hands for other activities!  Specifications: Constructed of injection molded nylon and polypropylene. Fasteners included Kit Includes:  18" of 1/4" bungee (2) Bungee terminal ends with sleeve (4) Lashing hooks with one hole (2) 10-32 X 3/4" PH machine screws (6) 10-32 Nyloc nuts (6) #10 flat washers (6), trifold pop rivets (6) Easy installation instructions

Anchor Cleat Kit The YakGear Anchor Cleat Kit comes with a 4-inch nylon anchor cleat for kayaks, canoes, and small boats. This anchor cleat provides a stable access point to secure anchors, drift chutes, bow lines, and safety lines.  As always, this complete kit comes with all stainless steel installation hardware, installation instructions, and rigging tips from YakGear. Waterproof silicone is recommended but not included.  Features: Installation instructions and hardware are included 1-year warranty Specifications: Length: 4 inches

Spare Paddle Wheel Kit Maretron spare paddle wheel kit WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Paddle Wheel Kit for Raymarine ST40, 60, 60 PLUS, 365/470/750 Kit contains: Paddle wheel Stainless axle  Rubber o-rings

SIMER 61 PADDLE PUMP KIT

ST850 Paddlewheel & Valve Kit Includes: 1 Paddlewheel and Shaft 4 O-rings 1 Valve Sleeve This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Molded Stick Clip Kit - 3/4" Clips Add or replace paddle holders with the YakGear Molded Paddle Clip Kit. While there are many different ways to mount and store paddles on kayaks and canoes, molded rubber pole clips are by far the strongest and most reliable. With solid rubber construction, the molded clips promote the strength of a continued locking effect while in use. the 3/4 in. clip will fit paddles from 5/8 inch to 7/8 inch and is YakGear’s preferred method of securing the YakGear - Yakstick Mud Anchor. This kit includes two molded rubber paddle clips, intended for combined, linear use on one paddle or mud anchor. As always, this complete kit comes with all stainless steel installation hardware, installation instructions, and rigging tips from YakGear. Waterproof silicone is recommended but not included. Features: Molded rubber paddle clips allow for easy paddle or mud anchor storage Two solid rubber-molded paddle clips are provided 3/4 in. clips fit paddles and mud anchors ranging from 5/8 to 7/8 in. Installation instructions and hardware are included 1-year warranty Specifications: Size: 3/4 in. clips

Molded Paddle/Pole Clip Kit - 1-1/4" Clips  Add or replace paddle holders with the YakGear Molded Paddle Clip Kit. While there are many different ways to mount and store paddles on kayaks and canoes, molded rubber pole clips are by far the strongest and most reliable. With solid rubber construction, the molded clips promote the strength of a continued locking effect while in use. The 1-1/4 in. design fits most paddles and push-poles, ranging in circumference from 1-1/4 inch to 1-1/2 inch. This kit includes two molded rubber paddle clips, intended for combined, linear use on one paddle or mud anchor. As always, this complete kit comes with all stainless steel installation hardware, installation instructions, and rigging tips from YakGear. Waterproof silicone is recommended but not included. Features: Molded rubber paddle clips allow for easy paddle or mud anchor storage Two solid rubber-molded paddle clips are provided 1-1/4 clips fit paddles with a circumference ranging from 1-1/4 to 1-1/2 in. Installation instructions and hardware are included 1-year warranty Specifications: Size: 1-1/4 in. clips

Drip Ring Kit Drip rings help stop the water from flowing down the shaft of the paddle into the boat or lap of the paddler while paddling. Stay dry and paddle on with YakGear Drip Rings. Accommodating two-piece paddles with a shaft circumference of 1-1/4 inch to 1-1/2 inch, the drip rings are placed close to the paddle blades on the shaft of the paddle. Drip ring combinations are sold in quantities of two for placement on the port and starboard sides of one paddle. The paddle must be two pieces for proper installation. Paddle not included.  Features: Sold in quantities of two Drip rings stop water from flowing down the shaft of the paddle Fits paddles ranging from 1-1/4 to 1-1/2 in. in circumference 1-year warranty

Bungee Deck Kit Add or replace the bungee system on the deck of a kayak or canoe with the YakGear Deck Kit. Bungees on the deck of a boat add extra storage for more equipment on your adventure. The kit comes with 10 feet of ¼-inch nylon bungee and is equipped with 6 pad eyes and 2 J hooks for deck mounting. As always, this complete kit comes with all stainless steel installation hardware, installation instructions, and rigging tips from YakGear. Waterproof silicone is recommended but not included.  Features: Easily replace the deck bungee or add more storage 10 ft. of 1/4 in. nylon bungee, 6 pad eyes, and 2 J hooks included Installation instructions and hardware are included 1-year warranty

 Performance Paddle Clip This one-piece Performance Paddle Clip allows for simple, one-handed storage of a paddle. Features an anti-snag ramp to prevent lines from getting stuck under the clip when not in use and leash attachment points for securing a paddle leash. Kit Includes: Paddle clip (1) 10-32 X 1” PH machine screws (2) 10-32 Nyloc nuts (2) #10 flat washers (2)  #10 well nuts (2) Features: Proudly constructed in the USA of UV-resistant injection molded nylon with stainless steel hardware Able to store a paddle with a diameter of 1-1/8 inches Specifications: Fastener: 1/4 in. PH Weight: 0.18 lbs

Toggle Handle Kit The YakGear Toggle Handles easily attach to a pad eye or deck loop at the bow or stern of your watercraft. Sold as a two-pack Features: Sold as a two-pack Quick and easy replacement for any watercraft 2 toggle handles per pack Black handle with black rope 1-year warranty *HARDWARE NOT INCLUDED

This is the Major Rebuild Kit that includes the pump shaft.

Jabsco 7420-1001 Kit Kit