USB-C to USB-A Male Adapter Cable Connect your compatible GPSMAP® 9000 series chartplotter to a computer using this 15-foot USB cable and a compatible HDMI cable (sold separately). This water-resistant and secure connection allows you to touch the chartplotter screen to operate the computer, including the ability to see and touch the keyboard on the screen.

SeaTalkng to DeviceNet Male Adapter Cable - 1M Adapts SeaTalkng to NMEA2000 network. 

SeaTalkng to DeviceNet Female Adapter Cable - 1M Adapts SeaTalkng to NMEA2000 network. 

USB-C to USB-A Female Adapter Cable Use this cable to connect a male USB-A cable to the USB C-port on your compatible GPSMAP® 9000 series chartplotter.

USB-C to Micro USB Adapter Cable Use this cable to connect a male Micro USB to the USB-C port on your compatible GPSMAP® 9000 series chartplotter. This cable also can be used for the USB Card reader.

10-Pin to 12-Pin Adapter Cable (0.4m) for TZT3 Features: 10-Pin to 12-Pin ends Length: 0.4m Used specifically for Furuno's TZT3 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

1M to 2F Y Adapter This Roswell RCA adapter cable is a 1 male to 2 female Y adapter splitter cable. Features: 1 male to 2 female adapter cable

1F to 2M Y Adapter This Roswell RCA adapter cable is a 1 female to 2 male Y adapter splitter cable. Features: 1 female to 2 male adapter cable

Raynet to RJ45 Female Adapter 100mm This adapter has a RayNet Female connector at one end, and a RJ45 Female Gland connector at the other end. The Gland makes the RJ45 Female socket watertight. A typical use for this cable would be to convert a RJ45 Digital Radar Cable to a RayNet Radar Cable so you can connect the cable directly into the new HS-5 Network Switch or directly into the back of an ace or gS Series multifunction display.

External GPS/Iridium Antenna with Adapter Cable Use our external passive antenna/extension cable when you want to install an external GPS/Iridium antenna. Can be used on the exteriors of vehicles or buildings as the antenna is magnetic. The antenna cable is 1.5 meters (4.9 ft) long; the dongle, or adapter cable, is about 0.2 meters (8 in).

RayNet to Seatalkhs Socket Adapter Cable The Raynet (F) to SeaTalkhs (F) cable adapter allows you to fit the existing waterproof, locking SeaTalkhs cables used with G-Series, E-Wide and E-Classic MFDs to new generation RayNet multifunction displays. The adapter cable is 15" (400mm) long.

Marine Network Adapter Cable - Small Female (Right Angle) to Large Female Adapt the small network connector on your Garmin device to a large connector of Garmin Marine Network cables.  Compatible with: GMR Fantom® 124, 126, 18x/24x Dome Radar, 254, 246, 54, 56 radars Technical Specifications: Length - 11.8" (30cm) *Sold as an Individual

gWind™ Race/nWind™ Connector Adapter Cable Bundle This bundle can be used by existing Nexus customers who are looking to replace their nWind transducer with a Garmin gWind series transducer. Using the nWind to gWind connector adapter cable, customers can retrofit the included gWind Race transducer to an existing Nexus network using an existing Nexus mast cable. In The Box: gWind Race transducer Connector adapter cable Propeller installation instructions Compatible Devices: gWind™ Race Transducer WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

7-Pin Transducer Adapter Cable to HOOK² This adapter cable will adapt any Navico 7-pin tranducer to a HOOK2 unit.

MS-CBRCA3.5 Input Cable - 1 Male (3.5mm) to 2 Male RCA Cable  Connect from a 3.5 mm Male to 2 Male RCA connectors. Features: Length - 70" *Sold as an Individual  WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.