7" Swivel with Quick Release Bracket This mounting bracket provides quick installation or easy removal of seats equipped with the 8WD7S swivel (included). Swivel Features: Black powder-coated steel construction Quietly swivels 360° 5-1/4" hole pattern compatible with most seats Class B certified per ABYC standards Not compatible with 8WD16 / 17 Quick Release Bracket Bracket Features: High-impact plastic construction Mounts to flat surfaces, pedestals, or seat stands Not compatible with 6 in. seat swivels

Tilt/Swivel Quick-Release Bracket f/echoMAP™ 5xxx Secure your compatible marine device with this mount, which features tilt/swivel capabilities for optimum viewing. With the mount's quick cable disconnect feature, you can plug the necessary cords directly into the mount, allowing you to seat/unseat your device with ease. Compatible Devices: echoMAP™ CHIRP 52cv echoMAP™ CHIRP 52dv echoMAP™ CHIRP 53cv echoMAP™ CHIRP 53dv echoMAP™ CHIRP 54cv echoMAP™ CHIRP 54dv echoMAP™ CHIRP 55cv echoMAP™ CHIRP 55dv WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

RTA-61 Cable-Steer Quick Release Bracket For quick, easy removal of your cable-steer, bow-mount trolling motor. The extruded aluminum design with side screws provides a quiet and secure locking system. Fits foot control motors with up to a 45" shaft and hand control motors with up to a 52" shaft. They are designed to handle the increased torque of QUEST series motors. Features: Recommended for the higher thrust associated with Ultrex™ QUEST™ series motors Allows trolling motors to be quickly removed from and reattached to the boat deck Top and bottom plates slide together and are tightened/secured to one another using dual-locking hardware Solid, anodized aluminum construction Includes both 5/16" and 1/4" stainless steel mounting hardware Brackets can be secured with a padlock (not included) for additional security Fits 45" shafts and smaller foot-control motors and 52" shafts and smaller hand-control motors

MKA-62 Cable-Steer Quick Release Bracket For quick, easy removal of your cable-steer, bow-mount trolling motor. The extruded aluminum design with side screws provides a quiet, secure locking system. Fits 52" to 72" shaft foot-control motors and 62" shaft hand-control motors. They are designed to handle the increased torque of QUEST series motors. Features: Recommended for the higher thrust associated with Ultrex™ QUEST™ series motors Allows trolling motors to be quickly removed from and reattached to the boat deck Top and bottom plates slide together and are tightened/secured to one another using dual-locking hardware Solid, anodized aluminum construction Includes both 5/16" and 1/4" stainless steel mounting hardware Brackets can be secured with a padlock (not included) for additional security Fits 52" to 72" shaft, foot-control motors, and 62" shaft hand-control motors

HOOK² 4/5 Quick Release Bracket Quick release bracket for HOOK² 4 & HOOK² 5

MKA-16-03 Quick Release Bracket For quick, easy removal of your electric-steer, bow-mount trolling motor. Extruded aluminum design with side screw provides quiet and secure locking system. Compatible with Ulterra, Terrova, PowerDrive, PowerDrive V2, PowerDrive Pontoon and Deckhand 40. - Allows trolling motor to be quickly removed from and reattached to boat deck - Sidescrew design attaches trolling motor to top bracket and slides into - deck-mounted bottom bracket, secured with tightening screw - Solid, anodized aluminum construction - Includes stainless steel mounting hardware - Brackets can be secured with padlock (not included) for additional security WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

XI Series Quick-Release Bracket - Composite Black This bracket is low profile and the small footprint is designed to save you space.

MKA-56 Quick Release Bracket Easily remove your electric steer, bow-mount trolling motor featuring QUEST technology. High-yield composite construction is super strong and impervious to corrosion and is specifically designed for higher thrust motors and longer shaft lengths. The low-profile design leaves the deck clear when the motor is removed. The locking handle with stainless steel pins can be secured with a padlock (padlock not included, sold separately). Features: Designed specifically for motors featuring QUEST technology to meet the increased stress created by high-thrust motors and long shaft lengths Allows bow-mount trolling motors to be quickly mounted and/or removed from boat deck Low-profile design attaches trolling motor to top bracket and drop in over deck-mounted puck Constructed of marine grade composite, powder-coated and anodized aluminum, and stainless steel to resist rust, corrosion, and discoloration Locking handle can be secured with padlock (not included) for additional security Compatible with electric steer motors featuring QUEST technology Designed for use in freshwater or saltwater

MKA-57 Quick Release Bracket The bracket and top plate allow you to easily slide the motor inboard (10") or easily remove it for storage and security. Features anodized aluminum construction with stainless steel components and hardware for optimal corrosion protection in all saltwater or freshwater environments. Features: Slide motor inboard 10" for a better boat cover fit and more clearance when launching the boat Designed specifically for motors featuring QUEST technology to meet the increased stress created by high-thrust motors and long shaft lengths Allows trolling motors to be quickly removed from and reattached to the boat deck The dual Cam-lock design reduces bracket movement and noise Includes stainless steel mounting hardware, a lanyard, and a locking pin Upper and lower plates include slots for securing with a padlock (not included) for added security Compatible with electric steer motors featuring QUEST technology Designed for use in freshwater or saltwater

RTA-62 Quick Release Bracket Easily remove your electric steer, bow-mount trolling motor. High-yield composite construction is super strong, impervious to corrosion, and specifically designed for higher thrust motors and longer shaft lengths. The low-profile design leaves the deck clear when the motor is removed. A locking handle with stainless steel pins can be secured with a padlock (padlock not included; sold separately). NOTE: Recommended for 112 lb. thrust and 72" and 87" shaft trolling motors. Features: Designed to meet the increased stress created by high-thrust motors and long shaft lengths Allows bow-mount trolling motors to be quickly mounted and/or removed from the boat deck The low-profile design attaches the trolling motor to the top bracket and drops in over the deck-mounted puck Constructed of marine grade composite, powder-coated and anodized aluminum, and stainless steel to resist rust, corrosion, and discoloration The locking handle can be secured with a padlock (not included) for additional security. Designed for use in freshwater or saltwater

MKA-64 Quick Release Bracket Easily remove your electric steer and bow-mount trolling motor. High-yield composite construction is super strong, impervious to corrosion, and specifically designed for higher thrust motors and longer shaft lengths. The low-profile design leaves the deck clear when the motor is removed. A locking handle with stainless steel pins can be secured with a padlock (padlock not included; sold separately). NOTE: Recommended for 112 lb. thrust and 72" shaft trolling motors. Features: Designed to meet the increased stress created by high-thrust motors and long shaft lengths Allows bow-mount trolling motors to be quickly mounted and/or removed from the boat deck The low-profile design attaches the trolling motor to the top bracket and drops in over the deck-mounted puck Constructed of marine grade composite, powder-coated and anodized aluminum, and stainless steel to resist rust, corrosion, and discoloration The locking handle can be secured with a padlock (not included) for additional security Designed for use in freshwater

Quick Release Bracket for 300W Heater  Install and Remove your Xtreme Heater FAST! Driven by customer demand, our quick-release bracket was designed specifically for your Xtreme heater and allows you to easily install and remove your heater(s) in seconds, without the need for tools. Using this bracket, your mounting options include locations you may not have considered due to concern for blocked access to other components in your tight engine space. For our customers who prefer to leave their heater(s) in place only during the winter months, THIS is the accessory you've been asking for. The quick-release bracket makes it simple to remove the heater for the boating season, leaving just the low-profile bracket installed and ready to go. When winter returns, lock it down, and plug it in! Features: Built Xtreme Tough, anodized aluminum construction will not corrode Provides easy off-season storage, for quick access to engine spaces Works on ALL Xtreme Heaters built after 2004 Quickly Install and Remove your Heater Without Tools! One Year Warranty

Quick Release Bracket for 450W & 600W Heaters Install and Remove your Xtreme Heater FAST! Driven by customer demand, our quick-release bracket was designed specifically for your Xtreme heater and allows you to easily install and remove your heater(s) in seconds, without the need for tools. Using this bracket, your mounting options include locations you may not have considered due to concern for blocked access to other components in your tight engine space. For our customers who prefer to leave their heater(s) in place only during the winter months, THIS is the accessory you've been asking for. The quick-release bracket makes it simple to remove the heater for the boating season, leaving just the low-profile bracket installed and ready to go. When winter returns, lock it down, and plug it in! Features: Built Xtreme Tough, anodized aluminum construction will not corrode Provides easy off-season storage, for quick access to engine spaces Works on ALL Xtreme Heaters built after 2004 Quickly Install and Remove your Heater Without Tools! One Year Warranty

XI Series Quick-Release Bracket, Composite, White The Quick-Release Bracket provides quick installation and removal of MotorGuide Xi5 trolling motors as well  as competitive electric steer motors. Low profile and small foot print don't take up much space on boat deck. Tough composite nylon construction with stainless steel hardware included. Bracket can be secured with a padlock for theft protection.  White model. Low profile design Made out of composite material White WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Quick-Release Bracket, Aluminum, Black The Quick-Release Bracket provides quick installation and removal of MotorGuide Xi5 trolling motors as well as competitive electric steer motors. Low profile and small foot print don't take up much space on boat deck. Full cast aluminum base for ultimate stability. Stainless steel hardware included. Positive locking mechanism provides a rigid mounting platform for the trolling motor to eliminate noise and movement. Black model. Low profile design Made out of aluminum Black