The Jabsco 30550-5005 is a 316 stainless steel hygienic flexible impeller pump with a neoprene impeller, carbon/ceramic/nitrile mechanical seal and 1 in sanitary clamp-type ports, supplied as a complete motor pump unit coupled to a 3/4 HP, 1750 RPM, 115V single phase, TEFC, 60 Hz motor. It is self-priming and debris-tolerant.
Hygienic stainless flexible impeller pumps are especially useful for viscous or air-entrained food, cosmetic and pharmaceutical products, and their gentle, low-shear action handles delicate liquids without breaking them down. They can pass soft and hard solids and are designed to be cleaned in place or easily stripped for cleaning. The neoprene impeller suits water-based food, beverage and general products, gives up to 10 ft of dry suction lift and up to 22 ft when wetted. The pump relies on the liquid for lubrication and must not run dry for more than 30 seconds.
Key Features
- 316 stainless steel pump body
- Neoprene flexible impeller
- Carbon/ceramic/nitrile mechanical seal
- 1 in sanitary clamp-type ports
- Coupled to a 3/4 HP, 1750 RPM, 115V single phase, TEFC, 60 Hz motor
- Self-priming and debris-tolerant
Applications
- Dairy, beverage and food product transfer
- Cosmetic and pharmaceutical liquids
- Viscous and shear-sensitive products
- Clean-in-place process lines
Specifications
- Part Number: 30550-5005
- Pump Body: 316 stainless steel
- Impeller: Neoprene
- Shaft Seal: carbon/ceramic/nitrile mechanical seal
- Ports: 1 in sanitary clamp-type
- Configuration: Motor pump unit
- Motor: 3/4 HP, 1750 RPM, 115V single phase, TEFC, 60 Hz motor
- Dry Suction Lift: Up to 10 ft
- Wetted Suction Lift: Up to 22 ft
- Impeller Temperature Range: 45 to 150 F (7 to 65 C)
Frequently Asked Questions
Q: What routine maintenance does it need?
Inspect and replace the impeller periodically, watch the seal for leaks, and keep the suction line airtight so the pump primes reliably.
Q: When should I choose a different seal?
For abrasive or highly corrosive liquids, a tungsten carbide seal version is the better choice. Ask our team if you are unsure.
Q: How do I confirm chemical compatibility?
Check your liquid against compatibility data for 316 stainless steel, the neoprene impeller and the seal materials. Contact our team with your liquid for help.
Q: Can the pump handle solids?
Yes. It passes soft and hard solids with minimal damage, and its low-shear action protects delicate products.
Not sure this is the right part? Send us a Picture of the Pump Plate on your pump and the CLR Marine team will confirm the correct part.
CLRMarine
