The Jabsco 30530-4104 is a 316 stainless steel flexible impeller pump with a Viton impeller, tungsten carbide mechanical seal and 1-1/2 in NPT internal ports, supplied as a complete motor pump unit coupled to a 5 HP, 1750 RPM, 230/460V three phase, TEFC, 60 Hz motor. It is self-priming and debris-tolerant, with a nominal flow of 50 GPM (189 LPM).
Stainless steel flexible impeller pumps are especially useful where self-priming is required and for viscous or air-entrained liquids, handling liquids up to about 20,000 cps where the materials are compatible. They suit corrosive chemicals, alcohols and solutions, inks, dyes, paints and pigments, and viscous adhesives. The Viton impeller suits hydrocarbons and solvents, gives up to 6 ft of dry suction lift and up to 22 ft when wetted, and the tungsten carbide seal is chosen for highly corrosive or abrasive liquids. The pump relies on the liquid for lubrication and must not run dry for more than 30 seconds.
Key Features
- 316 stainless steel pump body
- Viton flexible impeller
- Tungsten carbide mechanical seal
- 1-1/2 in NPT internal ports
- Coupled to a 5 HP, 1750 RPM, 230/460V three phase, TEFC, 60 Hz motor
- Self-priming and debris-tolerant
Applications
- Chemical and solution transfer
- Inks, dyes, paints and pigments
- Viscous adhesives and thickeners
- Industrial process and plant pumping
Specifications
- Part Number: 30530-4104
- Pump Body: 316 stainless steel
- Impeller: Viton
- Shaft Seal: tungsten carbide mechanical seal
- Ports: 1-1/2 in NPT internal
- Configuration: Motor pump unit
- Motor: 5 HP, 1750 RPM, 230/460V three phase, TEFC, 60 Hz motor
- Nominal Flow: 50 GPM (189 LPM)
- Dry Suction Lift: Up to 6 ft
- Wetted Suction Lift: Up to 22 ft
- Impeller Temperature Range: 60 to 180 F (15 to 82 C)
Frequently Asked Questions
Q: What routine maintenance does it need?
Inspect and replace the impeller periodically, watch the seal for leaks, and keep the suction line airtight so the pump primes reliably.
Q: Why choose a tungsten carbide seal?
Tungsten carbide seal faces resist wear from abrasive particles and attack from highly corrosive liquids better than carbon/ceramic faces.
Q: How do I confirm chemical compatibility?
Check your liquid against compatibility data for 316 stainless steel, the Viton impeller and the seal materials. Contact our team with your liquid for help.
Q: Can it pump thick liquids?
Yes. At lower speeds it handles viscous liquids up to about 20,000 cps where the materials are compatible.
Not sure this is the right part? Send us a Picture of the Pump Plate on your pump and the CLR Marine team will confirm the correct part.
CLRMarine
