Jabsco 30510-4103 Stainless Motor Pump, Nitrile, 3/4 in NPT

The Jabsco 30510-4103 is a 316 stainless steel flexible impeller pump with a nitrile impeller, tungsten carbide mechanical seal and 3/4 in NPT internal ports, supplied as a complete motor pump unit coupled to a 3/4 HP, 1750 RPM, 115V single phase, TEFC, 60 Hz motor. It is self-priming and debris-tolerant, with a nominal flow of 8 GPM (30 LPM).

Stainless steel flexible impeller pumps are especially useful where self-priming is required and for viscous or air-entrained liquids, handling liquids up to about 20,000 cps where the materials are compatible. They suit corrosive chemicals, alcohols and solutions, inks, dyes, paints and pigments, and viscous adhesives. The nitrile impeller suits oil-based products, gives up to 10 ft of dry suction lift and up to 22 ft when wetted, and the tungsten carbide seal is chosen for highly corrosive or abrasive liquids. The pump relies on the liquid for lubrication and must not run dry for more than 30 seconds.

Key Features

• 316 stainless steel pump body
• Nitrile flexible impeller
• Tungsten carbide mechanical seal
• 3/4 in NPT internal ports
• Coupled to a 3/4 HP, 1750 RPM, 115V single phase, TEFC, 60 Hz motor
• Self-priming and debris-tolerant

Applications

• Chemical and solution transfer
• Inks, dyes, paints and pigments
• Viscous adhesives and thickeners
• Industrial process and plant pumping

Specifications

• Part Number: 30510-4103
• Pump Body: 316 stainless steel
• Impeller: Nitrile
• Shaft Seal: tungsten carbide mechanical seal
• Ports: 3/4 in NPT internal
• Configuration: Motor pump unit
• Motor: 3/4 HP, 1750 RPM, 115V single phase, TEFC, 60 Hz motor
• Nominal Flow: 8 GPM (30 LPM)
• Dry Suction Lift: Up to 10 ft
• Wetted Suction Lift: Up to 22 ft
• Impeller Temperature Range: 50 to 180 F (10 to 82 C)

Frequently Asked Questions

Q: What routine maintenance does it need?

Inspect and replace the impeller periodically, watch the seal for leaks, and keep the suction line airtight so the pump primes reliably.

Q: Why choose a tungsten carbide seal?

Tungsten carbide seal faces resist wear from abrasive particles and attack from highly corrosive liquids better than carbon/ceramic faces.

Q: How do I confirm chemical compatibility?

Check your liquid against compatibility data for 316 stainless steel, the nitrile impeller and the seal materials. Contact our team with your liquid for help.

Q: Can it pump thick liquids?

Yes. At lower speeds it handles viscous liquids up to about 20,000 cps where the materials are compatible.