The Jabsco 30510-2004 is a 316 stainless steel flexible impeller pump with a Viton impeller, carbon/ceramic mechanical seal and 3/4 in NPT internal ports, supplied as a replacement pump head only, without a motor, designed to mount on a 56C C-face motor. It is self-priming and debris-tolerant, with a nominal flow of 8 GPM (30 LPM). Use a 56C frame NEMA C-face motor rated 3/4 HP at 1750 RPM with a service factor of one. Because of high bearing loads, the motor should be ball-bearing equipped with the front bearing locked against axial movement, capacitor start and foot mounted.
Stainless steel flexible impeller pumps are especially useful where self-priming is required and for viscous or air-entrained liquids, handling liquids up to about 20,000 cps where the materials are compatible. They suit corrosive chemicals, alcohols and solutions, inks, dyes, paints and pigments, and viscous adhesives. The Viton impeller suits hydrocarbons and solvents, gives up to 6 ft of dry suction lift and up to 22 ft when wetted. The pump relies on the liquid for lubrication and must not run dry for more than 30 seconds.
Key Features
- 316 stainless steel pump body
- Viton flexible impeller
- Carbon/ceramic mechanical seal
- 3/4 in NPT internal ports
- Pump head for a 56C C-face motor
- Self-priming and debris-tolerant
Applications
- Chemical and solution transfer
- Inks, dyes, paints and pigments
- Viscous adhesives and thickeners
- Industrial process and plant pumping
Specifications
- Part Number: 30510-2004
- Pump Body: 316 stainless steel
- Impeller: Viton
- Shaft Seal: carbon/ceramic mechanical seal
- Ports: 3/4 in NPT internal
- Configuration: Pump head only, less motor
- Motor Mount: 56C C-face
- Nominal Flow: 8 GPM (30 LPM)
- Dry Suction Lift: Up to 6 ft
- Wetted Suction Lift: Up to 22 ft
- Impeller Temperature Range: 60 to 180 F (15 to 82 C)
Frequently Asked Questions
Q: Can it run at variable speed?
Yes. These pumps suit single or variable speed operation, and running slower helps with thick or delicate liquids.
Q: When should I choose a different seal?
For abrasive or highly corrosive liquids, a tungsten carbide seal version is the better choice. Ask our team if you are unsure.
Q: How do I confirm chemical compatibility?
Check your liquid against compatibility data for 316 stainless steel, the Viton impeller and the seal materials. Contact our team with your liquid for help.
Q: Can it pump thick liquids?
Yes. At lower speeds it handles viscous liquids up to about 20,000 cps where the materials are compatible.
Not sure this is the right part? Send us a Picture of the Pump Plate on your pump and the CLR Marine team will confirm the correct part.
CLRMarine
