The Jabsco 23610-3003 Maxi Puppy 3000 is a continuously rated, heavy-duty 12V DC flexible impeller pump with a bronze pump head and an oil-resistant nitrile impeller. It delivers a nominal 11 GPM (720 GPH, 44 LPM) at 10 feet of total head, self-primes from dry up to 8 feet, and lifts up to 20 feet once primed, making it a strong choice for bilge pumping, washdown, circulation and general transfer.
Bilge debris is no problem for the bronze-bodied flexible impeller design, and the simple construction means fewer wearing parts, all user serviceable. Ports accept 1/2 inch BSP threads or 1 inch ID hose. Suction lines must be airtight for the pump to self-prime, and because the pump relies on the liquid for lubrication it should never run dry for more than 30 seconds.
Key Features
- Continuously rated 12V DC motor
- Nominal 11 GPM (720 GPH) at 10 ft head
- Self-primes dry up to 8 ft, lifts to 20 ft when primed
- Bronze pump head with oil-resistant nitrile impeller
- Handles bilge debris
- 1/2 in BSP thread and 1 in ID hose ports
- All wearing parts user serviceable
Applications
- Bilge pumping with good discharge head
- Deck and anchor washdown
- Livewell and water circulation
- General purpose onboard and dockside transfer
Specifications
- Part Number: 23610-3003
- Series: Maxi Puppy 3000
- Voltage: 12V DC
- Flow: 11 GPM (720 GPH, 44 LPM) at 10 ft head
- Self-Priming: Dry up to 8 ft (2.4 m)
- Maximum Lift Primed: 20 ft (6 m)
- Pump Body: Bronze
- Impeller: Nitrile
- Ports: 1/2 in BSP thread, 1 in ID hose
- Liquid Temperature: 45 to 180 F (7 to 82 C)
- Duty: Continuous
Frequently Asked Questions
Q: Can this pump handle oily bilge water?
Yes. The nitrile impeller resists oil, which makes it better suited to bilge service than a neoprene impeller.
Q: Why won't my pump self-prime?
The most common cause is an air leak on the suction side. Check every hose clamp and fitting between the pickup and the pump.
Q: Is there a 24V version of this pump?
Yes. Order the 23610-3103 for 24V systems; they are otherwise the same pump.
Q: Can it be used with fuel?
No. Never use it for gasoline, petroleum products or any liquid with a flash point below 100 F (37 C).
Not sure this is the right part? Send us a Picture of the Pump Plate on your pump and the CLR Marine team will confirm the correct maxi puppy 3000 flexible impeller pump.
CLRMarine
