Jabsco 18670-0123 Commercial Duty Water Puppy 12V
The Jabsco 18670-0123 is the Jabsco Commercial Duty Water Puppy, a 12 volt bronze flexible impeller pump with a nitrile impeller, lip seal and 1/2 in NPT internal and 1 in hose barb ports. It delivers about 8 GPM, self-primes from a dry lift of about 6 ft and lifts up to 20 ft when primed, and it is built for heavier, longer duty than the standard Water Puppy.
These bronze flexible impeller pumps self-prime, handle small debris and can be mounted in any position, which is why they are used for bilge, washdown, livewell and transfer duty. Keep suction lines airtight so the pump can prime, drain it before freezing weather, and never let it run dry because the impeller depends on the liquid for lubrication.
Key Features
- Bronze flexible impeller pump
- Self-priming
- Tolerates small debris
- Can be mounted in any position
- Genuine Jabsco pump
Applications
- Bilge and compartment pump out
- Deck washdown
- Livewell and bait tank supply
- Freshwater and general transfer
- Marine and RV utility use
- Draining tanks and fixtures
Specifications
- Brand: Jabsco
- Manufacturer Part Number: 18670-0123
- Pump Body: Bronze
- Impeller: Nitrile
- Motor: 12 VDC
- Ports: 1/2 in NPT internal, 1 in hose barb
- Flow: About 8 GPM
- Suction Lift: About 6 ft dry, 20 ft primed
- Condition: New
Frequently Asked Questions
Q: Why will it not self-prime?
Almost always an air leak on the suction side. All suction connections must be airtight.
Q: How long can it run dry?
Only seconds. The impeller relies on the liquid for lubrication.
Q: What do I do before freezing weather?
Drain the pump by loosening the end cover so trapped water cannot freeze and crack the body.
Q: What is the main service part?
The impeller. Keep a spare with the matching compound.
Not sure this is the right part? Send us a Picture of the Pump Plate on your pump and the CLR Marine team will confirm the correct pump.
CLRMarine
