Jabsco 18220-1127 Ballast Puppy Pump, 12V, Polyurethane Impeller
The Jabsco 18220-1127 is the Jabsco Ballast Puppy, a 12 volt bronze flexible impeller pump for wakeboard and towboat water ballast, with a yellow polyurethane impeller and a lip type seal. It moves about 10 gallons, roughly 80 lb of water, per minute through 1/2 in NPT and 1 in external hose barb ports, and it shares the 18645-0000 body and 18647-0000 end cover of the Water Puppy family.
These bronze flexible impeller pumps self-prime, handle small debris and can be mounted in any position, which is why they are used for bilge, washdown, livewell and transfer duty. Keep suction lines airtight so the pump can prime, drain it before freezing weather, and never let it run dry because the impeller depends on the liquid for lubrication.
Key Features
- Bronze flexible impeller pump
- Self-priming
- Tolerates small debris
- Can be mounted in any position
- Genuine Jabsco pump
Applications
- Wakeboard and towboat ballast
- Filling and emptying ballast bags and tanks
- Bilge and compartment pump out
- Deck washdown
- Livewell and bait tank supply
- Freshwater and general transfer
Specifications
- Brand: Jabsco
- Manufacturer Part Number: 18220-1127
- Part Type: Wakeboard ballast pump
- Pump Body: Bronze
- Impeller: Polyurethane (yellow)
- Shaft Seal: Lip type
- Motor: 12 VDC
- Flow: About 10 GPM
- Ports: 1/2 in NPT, 1 in external hose barb
- Condition: New
Frequently Asked Questions
Q: What is the main service part?
The impeller. Keep a spare with the matching compound.
Q: Can it be mounted in any position?
Yes, although mounting with the pump head below the motor keeps any seal leakage away from the motor.
Q: Why will it not self-prime?
Almost always an air leak on the suction side. All suction connections must be airtight.
Q: How long can it run dry?
Only seconds. The impeller relies on the liquid for lubrication.
Not sure this is the right part? Send us a Picture of the Pump Plate on your pump and the CLR Marine team will confirm the correct ballast pump.