Jabsco 17820-0024 Oil Change System, 24V
The Jabsco 17820-0024 is the Jabsco 24 volt oil change system, a bronze flexible impeller pump with a nitrile impeller and a nitrile lip seal, close coupled to a 24 VDC motor and mounted with a manifold of three ball valves. It is installed in the engine room with the valves permanently plumbed to the engine oil pans or transmission sumps, so each reservoir can be emptied from one place without moving the pump.
Changing oil through the dipstick tube or a permanently plumbed drain line keeps used oil off the engine and out of the bilge, which is why oil change pumps are standard equipment on many boats. Warm the engine first so the oil flows freely, keep the suction end at the bottom of the sump, and never let a flexible impeller pump run dry for more than a few seconds.
Key Features
- Genuine Jabsco oil change product
- Clean engine oil removal
- Keeps oil out of the bilge
- Suits marine engines and generators
- Quick, repeatable oil changes
Applications
- Marine engine oil changes
- Generator and transmission oil changes
- RV and equipment maintenance
- Lawn and garden engines
- Workshop and fleet service
- Transfer of oils and light fuels
Specifications
- Brand: Jabsco
- Manufacturer Part Number: 17820-0024
- Part Type: Installed oil change system
- Pump Body: Bronze
- Impeller: Nitrile
- Shaft Seal: Nitrile lip type
- Motor: 24 VDC
- Manifold: Three ball valves, 1/2 in NPT
- Condition: New
Frequently Asked Questions
Q: Should the engine be warm?
Yes. Warm oil is thinner and pumps faster, but let it cool enough to handle safely.
Q: Can it pump diesel fuel?
Nitrile impeller pumps handle diesel and oils. Never pump gasoline with a pump that is not rated for it.
Q: Why is the pump slow on cold oil?
Cold oil is thick. Run the engine for a few minutes first, and keep suction hose runs short.
Q: How do I store it after use?
Pump a little clean light oil through it, then store it dry and protected from dirt.
Not sure this is the right part? Send us a Picture of the Pump Plate on your pump and the CLR Marine team will confirm the correct oil change system.