Jabsco 10396-0010 Wearplate
The Jabsco 10396-0010 is a genuine replacement wearplate for Jabsco flexible impeller pumps. The wearplate sits at the back of the pumping chamber, between the impeller and the seal side of the pump body, and takes the rubbing wear of the impeller vanes so the body itself is protected. Its flat face is the other wall that the vanes seal against. Pureflo pumps are the Jabsco 316 stainless steel sanitary flexible impeller pumps used on dairy, food, beverage, cosmetic and pharmaceutical products, built so the pump end can be opened quickly for cleaning. It is listed for Jabsco Pureflo 15010 and 15210 series sanitary pumps.
When the wearplate is grooved or pitted, liquid slips back past the vanes on each revolution, output falls and self-priming suffers, even with a new impeller. Orientation matters on assembly: the flat side faces the impeller and the raised boss faces the carbon face of the seal assembly. Inspect the wearplate every time the impeller is changed and replace it once a step can be felt with a fingernail.
Key Features
- Genuine Jabsco replacement wearplate
- Protects the pump body from impeller wear
- Flat sealing face for full output
- Correct fit with the seal assembly
- For Pureflo stainless steel sanitary pumps
- Listed for Pureflo 15010 and 15210 series pumps
Applications
- Jabsco Pureflo 15010 and 15210 series pumps
- Dairy and food processing
- Beverage, brewing and winery transfer
- Cosmetic and pharmaceutical products
- Restoring lost flow after impeller wear
- Scheduled sanitary pump overhauls
Specifications
- Brand: Jabsco
- Manufacturer Part Number: 10396-0010
- Part Type: Wearplate
- Fits: Jabsco Pureflo 15010 and 15210 series sanitary pumps
- Quantity Needed: One per pump
- Condition: New
Frequently Asked Questions
Q: How often should the wearplate be changed?
Inspect it at every impeller change. Replace it when the face is grooved, pitted or stepped where the vanes run.
Q: Will a new impeller fix low output on its own?
Not if the wearplate or end cover is grooved. Liquid slips through the groove whatever the condition of the impeller.
Q: Do I need to disturb the seal to change it?
The wearplate comes out after the impeller, and the seal assembly sits behind it, so check the seal faces while the pump is open.
Q: Why are there two similar wearplates?
Jabsco lists different wearplate numbers for different Pureflo configurations. Match the number to the model on your pump plate.
Not sure this is the right part? Send us a Picture of the Pump Plate on your pump and the CLR Marine team will confirm the correct wearplate.
CLRMarine
