Gianneschi FS 40/14FE 12V Clutch Pump

Gianneschi FS 40/14FE 24V Clutch Pump 24V

Little Giant Submersible Pump 505400 Little Giant 5-ASP-FS Submersible Pump Motor 115 Volt 60 Hz 1/6 HP Permanently Lubricated Oil Filled Continuous Duty Motor, 1200 GPH at 1 Foot Head, Shutoff Head 26.3 Feet, Inlet: Screened, Outlet: 1" FNPT with Garden Hose Adaptor, Epoxy Coated Aluminum Housing, Nylon Body, Viton Seal, Automatic Float Switch Comes On at 11" Off at 3", Fluid Temperature Up to 120F (49C), UL/CSA Listed, 10 Foot Power Cord   505400 This versatile pump includes a Integral Float Switch allowing the pump to be used in a variety of applications.

Gianneschi SUPER LARIO 3 Bronze Hand Pump 1 1/4" Gianneschi SUPER-LARIO-3, SUPER LARIO 3 Self Priming Double Acting Piston Pump, rated for 13.2 GPM at 95 feet head (40 PSI), Bronze construction, Bronze impeller. Inlet Port is 1-1/4 Inch, Discharge Port is 1-1/4 Inch.   Applications for the SUPERLARIO3 include pumping aggressive liquids, bilge emptying, tanks, diesel oil intake, oil transfer.

Gianneschi EXCELSIOR 2-GB Hand Pump This pump is suitable for lifting and pushing of clear liquids, and can be used for fresh or sea water. The body of the pump is cast iron, and the internal parts are bronze. The performance of this hand pump is in accordance with EN ISO 9906. The flow rate of 6.3 GPM at 95 feet head (40 PSI) is relative to 60 cycles/minute.   Pump Body: Cast Iron Impeller: Bronze Port Size: Inlet Port is 1 Inch Discharge Port is 1 Inch

Gianneschi ACB61E-24V Bronze 24V Self-Priming Pump Gianneschi ACB61E-24V, ACB Series Self Priming Liquid Ring Pump and Motor unit, Bronze construction, Brass impeller, 316 Stainless Steel Shaft. Motor is 0.18KW (1/4 Horsepower), 3200 RPM, 24 Volts DC. Inlet Port is 1/2 Inch, Discharge Port is 1/2 Inch.   Applications for the ACB61E24V include fire fighting, oil and diesel, bilges, chain washing, and in pumping seawater as well as any fluids with high air content.    

Gianneschi CP20-24V Bronze 24V Self-Priming Pump Gianneschi CP20-24V, CP Series Self Priming Liquid Ring Pump and Motor unit, Bronze construction, Bronze impeller, 316 Stainless Steel Shaft. Motor is 0.18KW (0.25 Horsepower), 2800 RPM, 24 Volts DC. Inlet Port is 3/4 Inch, Discharge Port is 3/4 Inch.   Pump Body: Bronze Impeller: Bronze Shaft: 316 Stainless Steel Port Size: Inlet Port is 3/4 Inch, Discharge Port is 3/4 Inch Motor Specs : 0.18KW (0.25 Horsepower), 2800 RPM, 24 Volts DC

Gianneschi CP20-12V Bronze 12V Self-Priming Pump Gianneschi CP-20-12V, CP Series Self Priming Liquid Ring Pump and Motor unit, Bronze construction, Bronze impeller, 316 Stainless Steel Shaft. Motor is 0.2KW (0.25 Horsepower), 2600 RPM, 12 Volts DC. Inlet Port is 3/4 Inch, Discharge Port is 3/4 Inch.   Applications for the CP2012V include liquid intake, grey water discharges, bilges, showers, diesel and oil, galleys, as well as in pumping seawater and fresh water. This pump is not suitable for viscous liquids or pumping abrasive liquids. Install the pump in a dry and well ventilated location.   The pump must be placed on a solid surface in the horizontal position, feet down. To reduce vibration block the machine with the bolts to the surface and install some vibration dumpers. These pump usually do not need any maintenance so long as the following precautions are taken. If there is a risk of freezing, it is necessary to empty the pump casing then fill the pump up before running it again. Make sure the pump never runs dry.

Gianneschi ACB80E-230V Mpu 230V 60Hz Gianneschi ACB80E-230V, ACB Series Self Priming Liquid Ring Pump and Motor unit, Bronze construction, Brass impeller, 316 Stainless Steel Shaft. Motor is 0.37kW (0.5 Horsepower), 2900 RPM, 230 Volts AC, Single Phase. Inlet Port is 3/4 Inch, Discharge Port is 3/4 Inch.   Applications for the ACB80E230V include the pumping of liquids with high gas content or seawater, as well as in chain washing, oil and diesel, fire fighting, bilges, and water supplying.

Gianneschi ACB80E-110V Bronze 110V 1Ph 60Hz Self-Prime Gianneschi ACB80E-110V, ACB Series Self Priming Liquid Ring Pump and Motor unit, Bronze construction, Brass impeller, 316 Stainless Steel Shaft. Motor is 0.37kW (0.5 Horsepower), 2900 RPM, 110 Volts AC, Single Phase. Inlet Port is 3/4 Inch, Discharge Port is 3/4 Inch.   Applications for the ACB80E110V include the pumping of liquids with high gas content or seawater, as well as in chain washing, oli and diesel, fire fighting, bilges, and water supplying.

Gianneschi CB 22-95 0.55KW Centrifugal Pump 230V 50/60Hz 1Ph Gianneschi CB-22-95-230V, CB Series Centrifugal Pump and Motor unit, Bronze construction, Bronze impeller, 316 Stainless Steel Shaft. Motor is 0.37KW (0.5 Horsepower), 2900 RPM, 230 volts AC, Single Phase. Inlet Port is 1 Inch BSP Inlet, Discharge Port is 1 Inch BSP Outlet.   Applications for the CB2295230V include air conditioning systems, water supply, lifting fresh or salty water at sanitary plants, water circulations, increasing water pressure at water plants, pumping fresh water and seawater, and cooling and heating.

Gianneschi ECOJET-1B-24V Water System Pump Gianneschi ECOJET-1B-24V, ECOJET Series Jet Pump and Motor Bronze construction Brass impeller 316 Stainless Steel Shaft Motor is 0.3 KW (0.4 Horsepower) 2900 RPM, 24 Volts DC.   Applications for the ECOJET1B24V include marine applications to pump fresh water and seawater, diesel oil liquids, non inflammables and liquids without any suspended parts. Most common uses are for sanitary systems, water supply for water pressure system, deck and chain washing, and fire fighting.

Gianneschi ACB80E-12V Bronze 12V Self-Prime Pump Gianneschi ACB80E-12V, ACB Series Self Priming Liquid Ring Pump and Motor unit, Bronze construction, Brass impeller, 316 Stainless Steel Shaft. Motor is 0.45KW (0.6 Horsepower), 2600 RPM, 12 Volts DC. Inlet Port is 3/4 Inch, Discharge Port is 3/4 Inch.   Applications for the ACB80E12V include chain washing, fire fighting, pumping seawater and liquids with a high gas content, diesel and oil pumping, bilges, and any water supplying applications.

Gianneschi CB 22-120 0.75KW Cent Pump 230V 50/60Hz 1Ph Gianneschi CB-22-120-230V, CB Series Centrifugal Pump and Motor unit, Bronze construction, Bronze impeller, 316 Stainless Steel Shaft. Motor is 0.55 KW (0.75 Horsepower), 2900 RPM, 230 volts AC, Single Phase. Inlet Port is 1 Inch BSP Inlet, Discharge Port is 1 Inch BSP Outlet.   Applications for the CB 22-120-230V include air conditioning systems, water supply, lifting fresh or salty water at sanitary plants, water circulations, increasing water pressure at water plants, pumping fresh water and seawater, and cooling and heating. Before installation, ensure that mains supply is grounded in accordance with local legislation and corresponds to motor plate detail.

Gianneschi ACB90E-24V Bronze 24V Self-Prime Gianneschi ACB90-24V, ACB Series Self Priming Liquid Ring Pump and Motor unit, Bronze construction, Brass impeller, 316 Stainless Steel Shaft. Motor is 0.44kW (0.6 Horsepower), 2800 RPM, 24 Volts DC. Inlet Port is 1 Inch, Discharge Port is 1 Inch.   Applications for the ACB9024V include water supplying, bilges, oil and diesel, chain washing, as well as in any applications involving the pumping of seawater or liquids that have a high gas content.