Finish Thompson DEPP001 DE Drum Pump 27 Inch
The DEPP001 is a Finish Thompson DE drum and container pump with a 27 inch tube, built in polypropylene and 316 stainless steel. It is supplied as the pump tube and is driven by a matched Finish Thompson motor. The 27 inch tube suits smaller containers and shallower drums, with wetted parts in polypropylene and 316 stainless.
It exists so that product comes out of the container under control rather than over the lip of it. Keep the tube flushed after use, fit a strainer where sediment is likely, and match the hose and nozzle to the fluid, because most drum pump failures start with something drawn off the bottom of the container.
Key Features
- Polypropylene wetted construction for acids and caustics
- Sealless tube design with no shaft seal to leak
- Fluid lubricated bearings along the length of the tube
- Accepts a bung adapter to stand upright in the container
- Matched to Finish Thompson drum pump motors
Applications
- Emptying drums, totes and carboys of process chemicals
- Acid, caustic and plating chemical dispensing
- Water treatment and laboratory chemical handling
- Decanting into smaller containers under control
- Replacing tipping and pouring of heavy containers
Specifications
- Brand: Finish Thompson
- Model: DEPP001
- Series: DE
- Type: Drum and container pump
- Wetted Material: Polypropylene and 316 stainless steel
- Tube Length: 27 inch
- Condition: New
Frequently Asked Questions
Q: Does the pump need a bung adapter?
It does if the container is to hold the pump upright, and the adapter also limits fumes escaping around the tube.
Q: How should the pump be flushed?
With a fluid compatible with both the product and the pump materials, run long enough to clear the full length of the tube.
Q: Is a strainer recommended?
Wherever sediment may have settled in the container, since debris reaching the impeller is the most common avoidable failure.
Q: What limits the hose size that can be used?
Static safety does. Fluid velocity should stay low enough that charge cannot build, which in practice means matching hose bore to the duty.
Not sure this is the right part? Send us a Picture of the pump plate on your pump and the CLR Marine team will confirm the correct drum pump before you order.
CLRMarine
