Flojet 02095-103 Pressure Switch Kit, 32-45 PSI, Threaded
The Flojet 02095-103 is the genuine pressure switch kit with a 32-45 PSI band in the threaded configuration. The threaded version connects to the pump through a screwed port rather than the unthreaded mounting used on other models in the range.
Getting that detail right is more important than it sounds, because the two versions are not interchangeable and the pressure band on the label gives you no clue which one you need. A switch that will not mount is at least obvious; the more frustrating outcome is a threaded switch forced into a housing it does not belong in, where it may appear to fit and then leak or fail to sense pressure properly. Identify the mounting on the pump before ordering — the existing switch is the easiest guide.
The 32-45 PSI band itself is the general-purpose setting for fresh water service: enough pressure for taps and a shower to work properly, gentle enough that clamps, push-fit joints and older plumbing are well within their limits. Replace the switch when it chatters, cycles rapidly with nothing drawing, or will not cut out — having first checked that a leak somewhere is not bleeding the pressure down and making a healthy switch behave as designed.
Key Features
- Genuine Flojet (Xylem) service part — correct switch and mounting for the pump
- Threaded configuration — not interchangeable with the unthreaded version
- 32-45 PSI band, the general-purpose setting for fresh water service
- Comfortable pressure at the outlets without straining joints and clamps
- Supplied as a kit rather than as separate components
Applications
- Flojet pumps using a threaded pressure switch port
- General fresh water service with taps, sinks and a shower
- Replacing a switch that chatters, cycles or fails to cut out
- Systems with hose clamps, push-fit joints or older plumbing
- Marine, RV and mobile pressurised water systems
Specifications
- Brand: Flojet (Xylem)
- Manufacturer Part Number: 02095-103
- Part Type: Pressure switch kit
- Cut-In Pressure: Approximately 32 PSI
- Cut-Out Pressure: Approximately 45 PSI
- Configuration: Threaded
- Condition: New
Frequently Asked Questions
Q: How do I tell whether my pump needs the threaded version?
Look at the switch currently fitted and how it attaches. If you are working from a pump with no switch on it, the parts breakdown for the model is the reliable answer.
Q: What happens if the wrong version is forced on?
At best it will not seal; at worst it appears to fit, then either leaks or fails to sense pressure correctly, which leaves the pump running or cycling unpredictably.
Q: Does the threaded port need sealant?
Follow the instructions supplied with the kit. Where sealant is called for, apply it sparingly — excess squeezed into the sensing port is a genuine way to make a new switch behave badly.
Q: Can I reuse the old switch's wiring?
Usually, if the connectors match and the wiring is sound. Inspect the terminals for corrosion while you have access, since a poor connection there produces symptoms that look exactly like a failing switch.
Not sure this is the right part? Send us a Picture of the pump plate on your pump and the CLR Marine team will confirm the correct part before you order.
CLRMarine
