|
Robline
In the 1990's, TEUFELBERGER acquired FSE, the German yachting brand, and the yachting line segment of Roblon, the Danish rope manufacturer. But even before that, TEUFELBERGER had already been manufacturing synthetic ropes for several decades. This bundled competence brought forth the FSE Robline brand and has now been given an appealing look in the form of Robline.
|
|
|
Jabsco X1990-83 O'Ring Viton
|
25.10 |
|
|
Gianneschi SGM45 Brush GM4 7X14 (Cp25/1)
|
44.85 |
|
|
Gianneschi SGM45A Brushes For CP25/1
|
38.21 |
|
|
Series 55 Ball Bearing Orbit Block™ - Single - Becket - Swivel Head
Lightweight
Kilogram for kilogram of working load, BB and RT Orbit Blocks™ are the world's lightest. The unique orbital design allows the bearing to only be in the active areas of the floating sheave. This minimises the mass of the inactive return race and hub.
Weight and bulk are further reduced in the different block configurations. The ball bearing single and becket block has a through-sheave becket arrangement. The result? The lowest weight possible.
Multi-sheave blocks have only single intermediate cheeks and an ultra-light and efficient head arrangement. This gives a 30% weight saving advantage over the nearest competitor. Other brands just link together their single blocks. This results in unnecessary double cheeks between each sheave, held together by a heavy steel channel across the top of the block.
Highest Working Load In Its Class
The orbital ball-bearing arrangement gives the largest possible bearing race diameter. This maximises load performance. The proven Ronstan 2-stage bearing system features high compression grade acetal ball bearings and a secondary full-contact bearing. This gives minimum friction across the full working load range.
The floating sheave and bearing system is supported by a fiber-reinforced load frame. The design was computer modelled to be stress optimised. The Dyneema® Link is produced from FSE Robline SK75 fiber, which is 10 times stronger and lighter than steel, and provides the final connection from the block to the load point.
Features:
Ultra Lightweight
Low friction 2-stage Orbital ball bearing system
Highest working load in its class
Low profile and compact
High performance cleating
Swivel shackle head for unlimited block rotation
Stainless steel shackle head for ultimate durability and compatibility with harsh fixing points
Ultra low profile integrated becket
Applications:
Mainsheet systems on dinghies, sportsboats and small keelboats to 9M(30')
Spinnaker sheets on dinghies, sportsboats and small keel boats to 9M(30')
Halyard, Vang and Backstay application on boats to 8M(26')
Control line applications on larger yachts
Ideal use for mainsheet systems and spinnaker sheets on dinghies, sportsboats and small keel boats to 9M(30')
Also ideal with halyard, vang and backstay applications on boats to 8M(26')
Spinnaker sheets on sportsboats and small keel boats (lateral lead blocks)
Control line applications on larger yachts
Materials:
Ball bearings - High compression strength carbon black Acetal
Stage 2 bearing - Carbon fiber reinforced, PTFE impregnated Nylon
Frame/Cheeks - Toughened, glass fiber reinforced Nylon
Rope Link: UV stabilized, multi-strand impregmented SK75 Dyneema®
Sheave: Carbon fiber reinforced, PTFE impregnated Nylon
Head fitting: Grade 316 stainless steel.
Specifications:
Sheave Ø: 55mm(2-5/32")
Max. Rope Ø: 10mm(3/8")
M.W.L.: 500kg(1,100lbs)
B. L.: 1,000kg(2,200lbs)
Weight: 88g(3.1oz)
|
35.98 |
|
|
Series 55 BB Orbit Block, Double Becket Swivel
Lightweight
Kilogram for a kilogram of working load, BB and RT Orbit Blocks™ are the world’s lightest. The unique orbital design allows the bearing to only be in the active areas of the floating sheave. This minimizes the mass of the inactive return race and hub.
Weight and bulk are further reduced in the different block configurations. The ball bearing single and becket block have a through-sheave becket arrangement. The result? The lowest weight is possible.
Multi-sheave blocks have only single intermediate cheeks and an ultra-light and efficient head arrangement. This gives a 30% weight-saving advantage over the nearest competitor. Other brands just link together their single blocks. This results in unnecessary double cheeks between each sheave, held together by a heavy steel channel across the top of the block.
Highest working load in its class
The orbital ball-bearing arrangement gives the largest possible bearing race diameter. This maximizes load performance. The proven Ronstan 2-stage bearing system features high compression grade acetal ball bearings and a secondary full-contact bearing. This gives minimum friction across the full working load range.
The floating sheave and bearing system are supported by a fiber-reinforced load frame. The design was computer modeled to be stress optimized. The Dyneema® Link is produced from FSE Robline SK75 fiber, which is 10 times stronger and lighter than steel and provides the final connection from the block to the load point.
Features:
Ultra Lightweight
Low friction 2-stage Orbital ball bearing system
Highest working load in its class
Low profile and compact
High performance cleating
Swivel shackle head for unlimited block rotation
Stainless steel shackle head and compatibility with sharp fixing points
Ultra low profile integrated beckets
|
76.00 |
|
|
Active Imaging 2-In-1 & 83/200 Package with Y-Cable
Active Imaging 2-in-1 Transducer
Active Imaging is a scanning sonar technology that provides incredibly detailed, high-resolution imaging sonar without sacrificing any range. Active Imaging transducers accomplish this by better directing the SideScan beams which increase resolution and improve range performance
Active Imaging is available in two models:
The Active Imaging stand-alone transducer lets the user combine the new Active Imaging transducer with a separate CHIRP transducer for dual transducer installs.
Active Imaging operates at 800kHz or 455kHz with maximum ranges of 150ft (800kHz) or 300ft (455kHz)
Active imaging Technology
Active Imaging utilizes the latest techniques in sonar signal generation
Active Imaging transducers are constructed of a polymer that reacts to sound waves more closely to the water. This ensures that no sonar signal is lost during transmit or receive
Active Imaging transducers include separate sonar elements for SideScan transmit and receive Separating transmit and receive allows Active Imaging to have an incredibly fast ping speed (Ping speed directly correlates to image resolution). Additionally, these separate elements focus more of the sonar signal outwardly, increasing the sonar signal to the sides and leading to better range performance
Features:
Active Imaging sonar offers no compromise high-resolution detail to users
800kHz operation covers many use cases and ranges.
With 800kHz range and resolution capabilities users do not need to choose between seeing in High detail or seeing far
High resolution IPS screens of NSS evo3 and HDS Live show the full image, allowing the user to see the entire underwater environment
Active Imaging transducers do not require any modules or extra hardware for use with next-generation displays
Environmental
Operating temperature: -15°C to +55°C (+5°F to +131°F)
Storage temperature: -30°C to +70°C (-22°F to +158°F)
Physical
Cable length: 7.6 m (25 ft)
Mounting options: Transom, flush step, and jack plate mounting
Connector: 9 pin
Transducer
Output: SideScan imaging, DownScan imaging, and temperature
Frequency: 455 kHz and 800 kHz
Max depth: DownScan: 91 m (300 ft): SideScan: 91 m (300 ft) side range at 455 kHz, 46 m (150ft) side range at 800 kHz
Operating speed: DownScan and SideScan: 9 knots (10 mph)
9-Pin High-Speed Skimmer Transducer 83/200 kHz
9-Pin High-Speed Skimmer M/H PK ASY: 83/200 kHz transom-mount skimmer depth/temp - Black 9-pin connector.
Features:
Transom Transducer
High-Speed Skimmer
83/200kHz with Temp
9-Pin Connector
|
394.80 |
|
|
GO9 XSE Combo with Transom Mount Transducer 83/200 kHz
This kit combines Simrad’s GO9 XSE Chartplotter/Fishfinder with Navico’s 9-Pin High-Speed Skimmer Transducer.
Simrad GO9 XSE Chartplotter/Fishfinder with C-MAP Discover Chart
GO9 XSE Multi-function display with built-in Echosounder, GPS, and Wi-Fi. Super-bright, 9" multi-touch widescreen display with NMEA 2000 and radar interface.
Features:
Easy to use, High brightness 9" tablet-style touchscreen
Built-in advanced echosounder capable of displaying CHIRP, Forwardscan, Sidescan, and Downscan images
Radar port for connection to a Simrad solid-state radar
Direct Audio, Autopilot, communication, and engine connection and control over NMEA2000
Built-in WiFi for mobile device mirroring and internet downloads of charting and software
Easy-to-use multi-touch software
Safely and easily navigate using your favorite cartography (Insight, Navionics, CMAP)
Determine depth, and bottom type and find fish using one of the many echosounder technology options
Quick and simple control of entertainment systems connected to NMEA2000
Vessel circuit control when connected to a C-zone digital switching system
View and monitor engine data while underway
Low Profile Glass dash styling
Super bright widescreen display
Built-in Wi-Fi connectivity
Software update notifications and downloads when connected to the internet
Screen mirroring when connected to a mobile device
Built-in 10 Hz GPS antenna
Dual Micro SD card slot
Built-in echosounder (Broadband & Chirp) (transducer required)
Built-in DownScan and Sidescan Imaging (transducer required)
Built-in Forwardscan Imaging (transducer required)
Radar port for direct connection to Simrad 3G/4G or Halo Radar scanners
Operable with OP40/OP50 Remote
Advanced NMEA2000 networking
Easy-to-Use Multi-Touch Display
The GO9 XSE offers true ease of use with intuitive touchscreen controls that smartphone and tablet users will find instantly familiar. Tap to create or select waypoints, pinch to zoom, or tap and drag to pan smoothly across charts. Simple home screen and menu layouts make all functions quickly accessible, with large and clearly-captioned icons that are easy to recognize and tap.
Chartplotter Navigation & Waypoint Management
The GO9 XSE is a full-featured chartplotter, with support for the widest available range of cartography options including C-MAP® MAX-N+, Navionics®, Insight®, Insight Genesis®, and NV Digital® Charts. Navigate confidently to destinations near and far, with the flexibility to choose charts that best fit your needs and location. Set and record those destinations easily with simple waypoint management: mark waypoints with a touch, and assign meaningful names that make it easy to look up your desired destination whether you've mapped out ten places or a thousand.
Expand Your View with a Simrad Radar Solution
The Simrad GO9 XSE is a full-featured radar display with plug-and-play connectivity to Simrad Broadband 3G, Broadband 4G, and Halo Pulse Compression radar systems. Cruise confidently through crowded harbors, navigate safely in poor visibility, keep an eye on distant weather cells, and find flocks of feeding birds that hint at good fishing spots. Automatic tuning helps to provide a clear radar picture in any conditions, while radar overlay combines radar data with navigational charts for an easy-to-interpret view of your surroundings.
Fully Customisable Interface
The Simrad GO9 XSE is fully customizable to suit your vessel and your favorite on-water activities from power boating, to fishing, to water sports. Customize your home screen with shortcuts to the features you use most, and personalize it with your choice of wallpaper. Adjustable split-screen views and customizable panel layouts let you see everything you need on-screen at once, whatever your activity.
Plan Smarter with TripIntel™ Technology
Designed for power boaters, TripIntel technology tracks and displays the key information you need to plan safe and enjoyable days on the water. Make smart decisions with fuel range overlaid on charts, easy access to current and future tide levels, and a detailed history of your previous trips including the route you took and how your boat performed.
Built-in 10 Hz GPS receiver*
With a high-speed GPS receiver updating your position ten times every second, the Simrad GO9 XSE is ideal for use aboard fast-moving RIBs and powerboats. Watch your boat's movement tracked smoothly, accurately, and in real-time, without 'jumping' from point to point on the display.
Cruise Charting View
Designed with power boating in mind, the Simrad GO9 XSE offers a unique Cruise Charting page that brings together crucial navigation data and charts in one easily readable display. Choose the information most relevant to your cruising style and on-water activities with the ability to edit on-screen data items.
NMEA 2000® Engine Monitoring & Instrumentation
The Simrad GO9 XSE connects to any NMEA 2000®-capable equipment aboard your vessel including outboard and inboard engines; fuel level and flow meters; speed, heading, and water temperature sensors; and much more. Create your own custom digital instrument displays, bringing a wealth of information to even the most crowded dash while keeping a clean look with as few gauges as possible.
Watch Your Depth with Built-in Sonar
Knowing the true depth beneath your hull can help you enjoy your time on the water with fewer worries, and makes it easier to locate suitable anchorages in unfamiliar waters. With built-in sonar, just add a suitable sonar transducer for accurate, real-time depth tracking. A scrollable depth history view lets you track back and easily set waypoints for promising anchorages, while StructureScan Imaging combines DownScan and SideScan sonar to offer a picture-like view of the bottom beneath your vessel.
Cruise Confidently with ForwardScan Sonar
Using an optional ForwardScan transducer, this forward-looking sonar technology provides a clear two-dimensional image of the bottom in front of your vessel, allowing you to navigate shallow or poorly charted waters with confidence. With real-time updates and a forward-looking view of up to eight times your current depth, ForwardScan lets you relax and enjoy a safer day on the water.
Find fish with CHIRP & StructureScan® HD sidescan imaging
Whether fishing is your life or just a casual hobby, any fishing trip will benefit from the extensive array of built-in sonar technology on the Simrad GO9 XSE. Add a suitable transducer, available separately or bundled with your display, and the GO9 XSE works as a powerful fishfinder with CHIRP-enabled broadband sonar for clear detection of fish throughout the water column. With an optional HDI or Active Imaging 3-in-1, the GO9 XSE also offers StructureScan HD sidescan imaging for a picture-like view of the fish-holding structure beneath and around your boat.
Simrad SonicHub®2 & Bluetooth® Audio Integration
If you're not at home on the water without a good soundtrack, the Simrad SonicHub®2 marine audio system is the perfect companion to a GO9 XSE display. Stream music from Bluetooth® connected tablets, smartphones, and other mobile devices, play MP3 files from a USB flash drive or listen to the SonicHub 2's built-in AM/FM radio. SonicHub 2 brings complete control of your audio entertainment to your GO9 XSE display, eliminating the need for a separate stereo head unit and letting you listen to your music, your way.
GoFree™ cloud enabled with Built-in Wi-Fi
With Wi-Fi built-in, the Simrad GO9 XSE provides direct access to GoFree cloud services including easy wireless map downloads, software updates, and more. Whether hooked up to your home Wi-Fi with your boat trailered in the driveway, logged in to your marina's Wi-Fi, or tethered to your smartphone out on the lake, you can access GoFree cloud services anywhere you have an internet connection. On the water, GoFree connects the Simrad GO9 XSE to your mobile devices, mirroring your display's screen on your smartphone or giving you full remote control from your tablet with the free GoFree Controller app.
SiriusXM Weather Integration
The Simrad GO9 XSE is the only GO Series display compatible with SiriusXM Marine satellite weather, via the optional WM-4 expansion module, for real-time access to weather information right on your display. With onboard access to weather radar, surface buoy reports, NOAA Marine Zone forecasts, and more, you can check out the conditions offshore before you even leave the dock. SiriusXM Marine is a subscription service, exclusively available within North America.
* Built-in GPS receiver works in any bracket-mount installation, and when flush-mounted with most fiberglass hulls. When flush-mounted in a metal hulled vessel, an external GPS receiver such as the Simrad GS25 may be required.
Specifications:
Casing: PC/ABS
Operating temp: -15°C to +55°C (+5°F to +131°F)
Water ingress: IPX6 and 7
Weight (excluding mounting hardware): 1.315 kg (2.9 lbs) - GO9 XSE
Screen brightness: 1200 nits
Screen resolution: 480 x 800 (H x W)
Viewing angle in degrees (typical value at contrast ratio = 10): L/R: 70, top: 50, bottom: 60
Operating voltage: 10 - 17 V DC
Current draw at 13.6 V (sonar off, max B/L): 1 A
Low power standby mode: yes
Protection: reverse polarity and temporary over-voltage to 36 V
Alarm output current: 1 A max
Processor: iMX61 single core
Conformity: CE, C-Tick
NMEA 2000 (compliant):1 port (Micro-C male) -, network load 1 LEN: 1 combined port Power and NMEA 2000 (7 pin connector)
Sonar 1 port (9-pin connector) Radar 1 port (5-pin Ethernet connector)
Card reader: Dual microSD
Comes With:
000-13702-001 - Gimbal bracket, GO9,V9
000-13700-001 - GO9 / V9 Bezel Replacement
000-13699-001 - GO9/V9 Dash mount kit
000-00128-001 - Power Cable
000-13698-001 - GO9 XSE Suncover
C-MAP Discover Chart Features
Full-Featured Vector Charts
Custom Depth Shading
High-Resolution Bathymetry
Easy-Routing
Tides & Currents
Navico 9-Pin High-Speed Skimmer Transducer 83/200 kHz
9-Pin High-Speed Skimmer M/H PK ASY: 83/200 kHz transom-mount skimmer depth/temp - Black 9-pin connector.
Features:
Transom Transducer
High-Speed Skimmer
83/200kHz with Temp
9-Pin Connector
|
838.80 |
|
|
GO9 XSE Combo with Transom Mount Transducer 83/200 kHz & HALO20 Package
This kit combines Simrad’s GO9 XSE with Navico’s 9-Pin High-Speed Skimmer Transducer and Simrad’s HALO20 20" Radar Dome.
Simrad GO9 XSE Chartplotter/Fishfinder w/C-MAP Discover Chart
GO9 XSE Multi-function display with built-in Echosounder, GPS, and Wi-Fi. Super-bright, 9" multi-touch widescreen display with NMEA 2000 and radar interface.
Features:
Easy to use, High brightness 9" tablet-style touchscreen
Built-in advanced echosounder capable of displaying CHIRP, Forwardscan, Sidescan, and Downscan images
Radar port for connection to a Simrad solid-state radar
Direct Audio, Autopilot, communication, and engine connection and control over NMEA2000
Built-in WiFi for mobile device mirroring and internet downloads of charting and software
Easy-to-use multi-touch software
Safely and easily navigate using your favorite cartography (Insight, Navionics, CMAP)
Determine depth, and bottom type and find fish using one of the many echosounder technology options
Quick and simple control of entertainment systems connected to NMEA2000
Vessel circuit control when connected to a C-zone digital switching system
View and monitor engine data while underway
Low Profile Glass dash styling
Super bright widescreen display
Built-in Wi-Fi connectivity
Software update notifications and downloads when connected to the internet
Screen mirroring when connected to a mobile device
Built-in 10 Hz GPS antenna
Dual Micro SD card slot
Built-in echosounder (Broadband & Chirp) (transducer required)
Built-in DownScan and Sidescan Imaging (transducer required)
Built-in Forwardscan Imaging (transducer required)
Radar port for direct connection to Simrad 3G/4G or Halo Radar scanners
Operable with OP40/OP50 Remote
Advanced NMEA2000 networking
Easy-to-Use Multi-Touch Display
The GO9 XSE offers true ease of use with intuitive touchscreen controls that smartphone and tablet users will find instantly familiar. Tap to create or select waypoints, pinch to zoom, or tap and drag to pan smoothly across charts. Simple home screen and menu layouts make all functions quickly accessible, with large and clearly-captioned icons that are easy to recognize and tap.
Chartplotter Navigation & Waypoint Management
The GO9 XSE is a full-featured chartplotter, with support for the widest available range of cartography options including C-MAP® MAX-N+, Navionics®, Insight®, Insight Genesis®, and NV Digital® Charts. Navigate confidently to destinations near and far, with the flexibility to choose charts that best fit your needs and location. Set and record those destinations easily with simple waypoint management: mark waypoints with a touch, and assign meaningful names that make it easy to look up your desired destination whether you've mapped out ten places or a thousand.
Expand Your View with a Simrad Radar Solution
The Simrad GO9 XSE is a full-featured radar display with plug-and-play connectivity to Simrad Broadband 3G, Broadband 4G, and Halo Pulse Compression radar systems. Cruise confidently through crowded harbors, navigate safely in poor visibility, keep an eye on distant weather cells, and find flocks of feeding birds that hint at good fishing spots. Automatic tuning helps to provide a clear radar picture in any conditions, while radar overlay combines radar data with navigational charts for an easy-to-interpret view of your surroundings.
Fully Customisable Interface
The Simrad GO9 XSE is fully customizable to suit your vessel and your favorite on-water activities from power boating, to fishing, to water sports. Customize your home screen with shortcuts to the features you use most, and personalize it with your choice of wallpaper. Adjustable split-screen views and customizable panel layouts let you see everything you need on-screen at once, whatever your activity.
Plan Smarter with TripIntel™ Technology
Designed for power boaters, TripIntel technology tracks and displays the key information you need to plan safe and enjoyable days on the water. Make smart decisions with fuel range overlaid on charts, easy access to current and future tide levels, and a detailed history of your previous trips including the route you took and how your boat performed.
Built-in 10 Hz GPS receiver*
With a high-speed GPS receiver updating your position ten times every second, the Simrad GO9 XSE is ideal for use aboard fast-moving RIBs and powerboats. Watch your boat's movement tracked smoothly, accurately, and in real-time, without 'jumping' from point to point on the display.
Cruise Charting View
Designed with power boating in mind, the Simrad GO9 XSE offers a unique Cruise Charting page that brings together crucial navigation data and charts in one easily readable display. Choose the information most relevant to your cruising style and on-water activities with the ability to edit on-screen data items.
NMEA 2000® Engine Monitoring & Instrumentation
The Simrad GO9 XSE connects to any NMEA 2000®-capable equipment aboard your vessel including outboard and inboard engines; fuel level and flow meters; speed, heading, and water temperature sensors; and much more. Create your custom digital instrument displays, bringing a wealth of information to even the most crowded dash while keeping a clean look with as few gauges as possible.
Watch Your Depth with Built-in Sonar
Knowing the true depth beneath your hull can help you enjoy your time on the water with fewer worries, and makes it easier to locate suitable anchorages in unfamiliar waters. With built-in sonar, just add a suitable sonar transducer for accurate, real-time depth tracking. A scrollable depth history view lets you track back and easily set waypoints for promising anchorages, while StructureScan Imaging combines DownScan and SideScan sonar to offer a picture-like view of the bottom beneath your vessel.
Cruise Confidently with ForwardScan Sonar
Using an optional ForwardScan transducer, this forward-looking sonar technology provides a clear two-dimensional image of the bottom in front of your vessel, allowing you to navigate shallow or poorly charted waters with confidence. With real-time updates and a forward-looking view of up to eight times your current depth, ForwardScan lets you relax and enjoy a safer day on the water.
Find fish with CHIRP & StructureScan® HD sidescan imaging
Whether fishing is your life or just a casual hobby, any fishing trip will benefit from the extensive array of built-in sonar technology on the Simrad GO9 XSE. Add a suitable transducer, available separately or bundled with your display, and the GO9 XSE works as a powerful fishfinder with CHIRP-enabled broadband sonar for clear detection of fish throughout the water column. With an optional HDI or Active Imaging 3-in-1, the GO9 XSE also offers StructureScan HD sidescan imaging for a picture-like view of the fish-holding structure beneath and around your boat.
Simrad SonicHub®2 & Bluetooth® Audio Integration
If you're not at home on the water without a good soundtrack, the Simrad SonicHub®2 marine audio system is the perfect companion to a GO9 XSE display. Stream music from Bluetooth® connected tablets, smartphones, and other mobile devices, play MP3 files from a USB flash drive or listen to the SonicHub 2's built-in AM/FM radio. SonicHub 2 brings complete control of your audio entertainment to your GO9 XSE display, eliminating the need for a separate stereo head unit and letting you listen to your music, your way.
GoFree™ cloud enabled with Built-in Wi-Fi
With Wi-Fi built-in, the Simrad GO9 XSE provides direct access to GoFree cloud services including easy wireless map downloads, software updates, and more. Whether hooked up to your home Wi-Fi with your boat trailered in the driveway, logged in to your marina's Wi-Fi, or tethered to your smartphone out on the lake, you can access GoFree cloud services anywhere you have an internet connection. On the water, GoFree connects the Simrad GO9 XSE to your mobile devices, mirroring your display's screen on your smartphone or giving you full remote control from your tablet with the free GoFree Controller app.
SiriusXM Weather Integration
The Simrad GO9 XSE is the only GO Series display compatible with SiriusXM Marine satellite weather, via the optional WM-4 expansion module, for real-time access to weather information right on your display. With onboard access to weather radar, surface buoy reports, NOAA Marine Zone forecasts, and more, you can check out the conditions offshore before you even leave the dock. SiriusXM Marine is a subscription service, exclusively available within North America.
* Built-in GPS receiver works in any bracket-mount installation, and when flush-mounted with most fiberglass hulls. When flush-mounted in a metal hulled vessel, an external GPS receiver such as the Simrad GS25 may be required.
Specifications:
Casing: PC/ABS
Operating temp: -15°C to +55°C (+5°F to +131°F)
Water ingress: IPX6 and 7
Weight (excluding mounting hardware): 1.315 kg (2.9 lbs) - GO9 XSE
Screen brightness: 1200 nits
Screen resolution: 480 x 800 (H x W)
Viewing angle in degrees (typical value at contrast ratio = 10): L/R: 70, top: 50, bottom: 60
Operating voltage: 10 - 17 V DC
Current draw at 13.6 V (sonar off, max B/L): 1 A
Low power standby mode: yes
Protection: reverse polarity and temporary over-voltage to 36 V
Alarm output current: 1 A max
Processor: iMX61 single core
Conformity: CE, C-Tick
NMEA 2000 (compliant):1 port (Micro-C male) -, network load 1 LEN: 1 combined port Power and NMEA 2000 (7 pin connector)
Sonar 1 port (9-pin connector) Radar 1 port (5-pin Ethernet connector)
Card reader: Dual microSD
Comes With:
000-13702-001 - Gimbal bracket, GO9,V9
000-13700-001 - GO9 / V9 Bezel Replacement
000-13699-001 - GO9/V9 Dash mount kit
000-00128-001 - Power Cable
000-13698-001 - GO9 XSE Suncover
C-MAP Discover Chart Features
Full-Featured Vector Charts
Custom Depth Shading
High-Resolution Bathymetry
Easy-Routing
Tides & Currents
Navico 9-Pin High-Speed Skimmer Transducer 83/200 kHz
9-Pin High-Speed Skimmer M/H PK ASY: 83/200 kHz transom-mount skimmer depth/temp - Black 9-pin connector.
Features:
Transom Transducer
High-Speed Skimmer
83/200kHz with Temp
9-Pin Connector
Simrad HALO20 20" Radar Dome with 10M Cable
Unrivalled Short-To-Mid-Range Performance
Extend your view from the bow of your boat out to 24 nautical miles with pulse-compression radar technology that not only delivers a powerful mix of short and long-range detection but provides precise target definition with minimal clutter.
Better Situational Awareness, Collision Avoidance
HALO20 radar delivers a comprehensive range of features to enhance your situational awareness and on-water safety. Monitor selected collision hazards with MARPA target tracking, tracking up to 10 targets, or 20 in dual range. Whether you’re navigating through crowded waterways or contending with poor visibility, HALO20 radar cuts through the clutter to give you a clear and current picture of your surroundings.
Ready Instantly
HALO20 Radar wakes instantly from its low-power standby mode, delivering radar coverage exactly when and where you want it. Even if your HALO20 radar is completely powered down start-up is a matter of seconds, not minutes like traditional pulse radar.
Easy to Use
Harbor, offshore, weather, and custom modes tune HALO20 Radar’s advanced signal processing to help ensure that targets can be seen vividly – even in the toughest environmental conditions.
Features:
10W Pulse Compression
24 nm range from a compact 20-inch dome
Unrivalled short range
Radiation safe
Easy operation with harbor, offshore, and weather mode
MARPA target tracking
InstantOn™
Low Power Consumption
Guard Zones
Included:
20" dome
10m cable (000-14548-001)
Ethernet Adapter Cable (000-14552-001)
|
2398.80 |
|
|
HDI 83/200 455/800 Skimmer Transducer
Works w/ Elite-7 combo and fishfinder models, plus HDS Gen2 Touch fishfinder and combo models
HDI Skimmer transducer 83/200/455/800kHz with built in temp. Includes mounting bracket and hardware. Cable Length 6m (20ft)
Hybrid Dual Imaging (HDI) transducer (83/200/455/800) - The power of two award-winning technologies -- Broadband Sounder PLUS Exclusive DownScan Imaging-- combined to provide the best-possible view beneath your boat.
|
113.42 |
|
|
HDI SSkimmer Low/High 83/200/455/800kHz Transom Mount 9-Pin Transducer
9-Pin Transom Mount Transducer
HDI Skimmer transducer 83/200/455/800kHz with built in temp. Includesmounting bracket and hardware. Cable Length 6M (20')
Hybrid Dual Imaging (HDI) transducer (83/200/455/800) - The power of twoaward-winning technologies -- Broadband Sounder PLUS Exclusive DownScanImaging-- combined to provide the best-possible view beneath your boat.
|
116.93 |
|
|
9-Pin High Speed Skimmer Transducer 83/200 kHz
9-Pin High Speed Skimmer M/H PK ASY: 83/200 kHz transom-mount skimmer depth/temp - Black 9 pin connector.
Features:
Transom Transducer
High Speed Skimmer
83/200kHz with Temp
9-Pin Connector
|
81.02 |
|
|
Cruise/Hook2 83/200 Skimmer Transom Mount Transducer with 19.5 cable.
Features:
83/200
Skimmer
Transom Mount
Specifically for Cruise Series and Hook2 Series
|
53.71 |
|
|
V10 Series RCA Audio Cable - 2 Channel - 6' (1.83 M)
T-Spec's 2 channel RCA patch cable will send your musical signals cleanly across the veritable battlefield of induced noise and uncertain factory electronics in your vehicle, so you'll enjoy all of your music with none of the noise. T-Spec RCA cables resist noise due to their shielded construction and the double twisted pair arrangement of the wire inside their jackets.
Recycled copper often contains impurities that can impair a wire's conductivity, so T-Spec uses only oxygen-free non-recycled, virgin copper to maximize signal flow in their patch cables. Each machined metal RCA plug features a patented 4-way split tip that guarantees the best possible electrical contact. T-Spec's proprietary PVC jacket gives each cable great flexibility for easier installation, and the durability required for marine certification.
Features:
Double twisted-pair design minimizes noise from your system
Oxygen-free virgin copper
Split-tip RCA connectors for maximum contact area
Ultra-flexible PVC blended jacket
Marine compliant
In the Box:
2 Channel - 6' (1.83 M) RCA audio cable
Instruction sheet
*Sold as an Individual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
12.48 |
|
|
Active Imaging 2-in-1 Transducer & 83/200 Pod In-Hull Transducer with Y-Cable
Allows for connection of an in-hull puck transducer and an Active Imaging 2-in-1 (Side/Down) transducer to the single sonar port of an Elite Ti2 or Elite FS display.
Features:
Active Imaging 2-in-1 Transom Transducer
83/200 Pod/Puck Transducer without temperature
Dual 9-pin Y-cable
|
289.30 |
|