ComNav ComNav Marine Ltd., one of the largest privately held autopilot manufacturers in the world has been providing advanced marine navigation solutions for commercial, recreational and government markets since 1982. Whether you are a sophisticated sailor navigating in unfamiliar waters, a recreational boater seeking peace of mind, a competitive racer requiring precision instrumentation or a commercial fisherman utilizing the latest technology to maximize the catch, Comnav can provide integrated marine navigation solutions under any sea conditions.

Mariner X2 Class B AIS Tranceiver ** As the FCC requires all units sold in the US to be programmed by a qualified technician. Please submit the form below for programming at time of purchase. A copy of the MMSI Registration or FCC Ship Station License is required along with the vessel master or owner's signature on the completed programming form. ** Click here to download form. Enhanced Safety and Security at Sea Features: Safety - See and be seen using your on-board chart plotter Display graphically AIS target overlay on standard radars and multifunction chart displays Wireless exchange - Navigation status between vessels and shore traffic monitoring centers Vessel monitoring of Class A and Class B Transmissions over standard VHF frequencies Allows fleet of vessels to be efficiently monitored and port traffic better managed Type approvals: FCC, USCG standard in USA, R&TTE Europe, and IC in Canada IP67 waterproof enclosure design with marine grade connectors Small and rugged, shock and vibration resistant Standard NMEA 0183, NMEA 2000 and USB interface Silent mode - User selectable Built-in 50 channel GPS receiver complemented by an integrated GPS antenna Four LED status indicators Includes Pro AIS2 software for configuration and diagnostics Easily upgradeable through PC software via USB Meets CE requirements 2 year warranty Supplied with configuration and set up software Data display for MMSI, vessel name, call sign, vessel type, etc. GPS display of position, COG and SOG GPS diagnostics and satellite signal bar chart Key status indicators Shows Transponder software and firmware version Displays receiver and transmitter statistics Displays Class A, Class B, base station and A to N target data Real time display for serial data output Ability to log data to file This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Mariner X2 Class B AIS Tranceiver ** As the FCC requires all units sold in the US to be programmed by a qualified technician. Please submit the form below for programming at time of purchase. A copy of the MMSI Registration or FCC Ship Station License is required along with the vessel master or owner's signature on the completed programming form. ** Click here to download form. Enhanced Safety and Security at Sea Features: Safety - See and be seen using your on-board chart plotter Display graphically AIS target overlay on standard radars and multifunction chart displays Wireless exchange - Navigation status between vessels and shore traffic monitoring centers Vessel monitoring of Class A and Class B Transmissions over standard VHF frequencies Allows fleet of vessels to be efficiently monitored and port traffic better managed Type approvals: FCC, USCG standard in USA, & TTE Europe, and IC in Canada IP67 waterproof enclosure design with marine grade connectors Small and rugged, shock and vibration resistant Standard NMEA 0183, NMEA 2000 and USB interface Silent mode - User selectable Built-in 50 channel GPS receiver complemented by an integrated GPS antenna Four LED status indicators Includes Pro AIS2 software for configuration and diagnostics Easily upgradeable through PC software via USB Meets CE requirements 2 year warranty Supplied with configuration and set up software Data display for MMSI, vessel name, call sign, vessel type, etc. GPS display of position, COG and SOG GPS diagnostics and satellite signal bar chart Key status indicators Shows Transponder software and firmware version Displays receiver and transmitter statistics Displays Class A, Class B, base station and A to N target data Real time display for serial data output Ability to log data to file This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Gianneschi SGM45 Brush GM4 7X14 (Cp25/1)

Gianneschi SGM45A Brushes For CP25/1

Groco Cp-55 Impeller &Amp; Set Screw  

Major Rebuild Kit for Sherwood G-55-2 This kit contains the following items   MS DATA SHEET 1 DATA SHEET SH 10515C 1 SCREW & WASHER SH 10615K 1 IMPELLER KIT SH 10944 1 CAM BRASS LARGE CHRYSLER SH 12211 2 BALL BEARING SH 12710 3 LOCKWASHER SH 12857 3 SCREW SH 12859 1 SEAL/SEAT ASSEMBLY SH 25150 1 WEAR PLATE SH 4258 3 SNAP RING (SMALL) SH 4259 2 SNAP RING (LARGE) SH 4264 1 WASHER SH 4432 1 KEY SH 5133 1 SPACER SH 9420 1 PIN     This kit is put together at time of order.

Minor Repair Kit for Sherwood G-55-2 This kit contains the following items   SH 10615K 1 IMPELLER KIT SH 12859 1 SEAL/SEAT ASSEMBLY     This kit is put together at time of order.

Amt 55-338, 2 In High Pressure Hose Kit AMT 2 High Pressure Hose Kit Includes: 20' 2" Suction and 100' 1 1/2" High Pressure Hose 1 1/2" Fire Nozzle, 1 1/2" x 2" Adaptor, and Hose Wrench

  Keywords: ComNav, AIS, ComNav X3 AIS, ComNav Voyager X3, Class A AIS system, ComNav Class A AIS, Voyager X3, X3, ComNav Voyager, ComNav Voyager X3 Calss A AIS    

Stand Alone Rudder Angle Indicator System Complete single station RAI system typically used on vessels that do not have a ComNav autopilot or, in cases where a separate RAI system is required (such as Hydraulic Full Follow-up steering systems). The Stand Alone System consists of three components: ComNav Rudder Follower w/50' cable and linkage kit RAI Distribution Box w/special circuitry ComNav 3" Rudder Angle Indicator

Fluxgate Compass Specifically designed for ComNav Autopilots, the ComNav Fluxgate Compass senses the earth's magnetic field directly. A heeling adjust control is provided to reduce or eliminate the effect of the vessel's vertical field. Features:: Microprocessor controlled Temperature range -15 degrees Celsius to +85 degrees Celsius Power supplied by ComNav autopilot Watertight high impact case Accuracy +/- 1.0 degrees (after compensation) DC sine and cosine output signals Compact size 40' cable and mounting brackets supplied

CT2 Drive Box ComNav CT2 Drive Box are specifically designed to connect Comnav 1001, 1101, 1201, and 2001 autopilots to steering systems using reversing DC Motor Pump sets, Linear actuators or DC Motor Mechanical Drive Units. The CT2 Drive Box features dynamic braking, current limiting and thermal protection of the MOFSET driving transistors while allowing full power acceleration when needed. CT2 Drive Box can be used with 12, 24 and 32VDC battery systems. Highlights of the CT2 Drive box include: Solid state circuitry Anodized aluminum housing (watertight if installed correctly) Current limiting Thermal protection Dynamic braking Rated 40 Ampere

Analog Rudder Angle Indicator The analog rudder angle indicator is a backlit 76mm (3in) gauge displaying the actual position of a vessels rudder. All ComNav Autopilots come with built in electronics to drive at least three meters without additional interfacing. Features: Flush mount Water resistant front face Supply voltage for lighting 12-32VDC

TS4 - Full Follow-Up Remote with Auto Function N2K with 6M Cable ComNav's full follow-up remote with auto function. NMEA 2000, 6 meter cable, for use with P4 Autopilot.