Gianneschi SGM45 Brush GM4 7X14 (Cp25/1)

Gianneschi SGM45A Brushes For CP25/1

Oberdorfer 104M-06-10F36BJ Centrifugal Pump FEATURES Pump Body: Bronze Ports: Inlet: 3/4" NPT Outlet: 1/2" NPT Flow: 24 GPM Max Pressure: to 23 PSI, 53 feet of head Impeller: Centrifugal Shaft Seal: Teflon Barrier Seal to Protect Motor Bearings. Carbon Face Mechanical Pump Seals. Buna Std., Viton and Teflon available. Shaft: 416 Stainless Steel is standard, Monel Shaft available for Marine Use Motor Drive: Pump heads mount to standard footed NEMA 56J jet pump motors. A wide variety of motors are available and we can assemble for you. This pump has the 10F36BJ-50/60-316SS motor.   APPLICATIONS BRONZE CLOSE COUPLED CENTRIFUGAL PUMP This close-coupled pump uses a standard NEMA C-Flange Jet Pump Motor with weld-on base and threaded shaft end to accept the pump impeller. The pump uses a mechanical type shaft seal with a Buna rubber element. It is suitable for water, oils, and some mild solvents and it is limited to 212 F. Viton® seals and Teflon seals (Chemlon) are available for severe solvents, difficult chemicals, and elevated temperatures.   Will Handle Contaminated Liquids. Extremely Quiet. A Standard in the Marine Air Conditioning Industry.   Oberdorfer Centrifugal Pump, 1/3HP ODP 115/230V Motor 50/60 Hz, with 316SS Shaft    

March 0150-0125-0200-2.50 Imp Mag Assy Encap W/2.50  

Imp Mag Assy W/3.50 Trim Quantity limited. Please contact us for replacement information.

Scot Pump 35068-J-2.50 MOTOR/PUMP 2.5" IMPELLER Pump • All Bronze marine centrifugal pump Freshwater or seawater applications • Precision machined to close tolerances for consistent performance. • Hardware - Type 303 stainless steel • Semi-open impeller handles solids • Heavy-duty. Use for continuous 24 hour – 7 day operation. • Stainless steel shaft.   Shaft Seal • Rated at 75 PSI – 5 BAR • Seawater Buna rubber parts, ceramic stationary and carbon rotating element, stainless steel spring and metal components   Motor – 2 Pole • Totally enclosed fan cooled IP-44 motors meet marine, European, and Coast Guard ignition protected requirements. • Sealed ball bearings • Single-phase capacitor start 50 Hz - 110/220 Volt 60 Hz – 115/230 Volt • Motors are dual frequency 50 Hz or 60 Hz • Three phase motors are not available

March 815 PL C Beer Pump March Pump’s industrial 815-PL-C is an American seal-less centrifugal magnetic drive pump ideal for applications such as home brewing and hot water systems. It is capable of generating a maximum flow of 8 gallons per minute at 3 feet, and its maximum head is 18.6 Feet (8PSI).   At 60Hz SystemUS                Metric Max Flow8 GPM  30.3 LPM Max Head18.6 FT  5.7 M Power0.04 HP        0.029 KW   At 50Hz USMetric 7.9 GPM30 LPM 13.5 FT4.1 M 0.04 HP0.029 KW   Electrical: 115V 50/60Hz or 230V 50/60Hz Inlet: 3/8"FPT & 3/4"MPT Outlet: 1/2"MPT   Wet End: Polysulfone (Front Housing), Stainless Steel (Rear Housing and Shaft), Teflon (Thrust Washer), Silicone (O-Ring), Ryton/Teflon/Glass (Impeller) Max Internal Pressure: 50 PSI / 3.4 bar Max Liquid Temperature: 250 °F / 121 °C   Applications for the 815-PL-C Magnetic Drive Pump include home brewing, hot water systems, solar heating, and fryers.   The 815-PL-C has pumped Cutting Oils, Ethylene Glycol, Hot Water, Hot Wort and Salt Water.

March 809 PL HS 115V 50/60 115V 50/60 Pump/Base 6'

March 809 SS HS C 115V 50/60 115V 50/60 Beer Pmp/Base 6'

Scot Pump 35067-2.50 Motor/Pump Unit • Compact • Enclosed Switch Compartment   Pump • All Bronze marine centrifugal pump Freshwater or seawater applications • Precision machined to close tolerances for consistent performance. • Hardware - Type 303 stainless steel • Semi-open impeller handles solids • 2.50" Impeller mounted on motor shaft • Heavy-duty, designed for continuous 24 hour – 7 day operation.   Shaft Seal • Rated at 75 PSI – 5 BAR • Seawater Buna rubber parts, ceramic stationary and carbon rotating element, stainless steel spring and metal components   Motor – 2 Pole • Meets Coast Guard ignition protected requirements. The thermal protector and starting switch are in the enclosed outlet cover. • Sealed ball bearings • Single-phase capacitor start 50 Hz - 110/220 Volt 60 Hz – 115/230 Volt • Dual frequency 50 Hz or 60 Hz single phase motors are available • Stainless steel shaft • Three phase motors are not available  

MP Pump 25926-30N28BT-50 Mpu Series 80 Brz 50 Hz This item is 'build to order'. Please contact us for lead time.

Gianneschi MV44G-230/400/50 Single Screw Pump Gianneschi MV44G-230V, MVG Series Single Screw Pump and Motor unit, Bronze construction, Buna Nitrile Stator, Stainless Steel Screw Rotor impeller, 316 Stainless Steel Shaft. Motor is 0.55 KW (0.75 Horsepower), 230 volts AC, 50/60 Hz, Single Phase. Inlet Port is 1 Inch BSP Inlet, Discharge Port is 1 Inch BSP Outlet.   Applications for the MV44G230V include emptying of Heavy Liquid Tanks Black And Grey Water, Emptying of waste, liquid with small suspended parts. This is a simple pump that consists of a stainless steel rotor screw that turns through a rubber stator and pushes liquid along.

Gianneschi BMA 50/160 B1 Motor and Pump 230V 1Ph Gianneschi catalog # BMA-50/160-B1-230V-, BMA Series Self Priming Centrifugal Pump and Motor unit, Bronze construction, Bronze impeller, 316 Stainless Steel Shaft. Motor is 2.2 KW (3 Horsepower), 2900 RPM, 230 volts AC, 50/60 Hz, Single Phase.   Applications for the BMA50/160B1230V include chain washing, air conditioners, emptying operations, bilges, cooling systems, OEM, fire fighting, ballasts, gray water systems, as well as swimming pool filling.

Groco Tc-50 Toilet Seat - White  

March 0155-0159-0200-3.50 Impeller W/Trim