|
Gianneschi SGM45 Brush GM4 7X14 (Cp25/1)
|
44.85 |
|
|
Gianneschi SGM45A Brushes For CP25/1
|
38.21 |
|
|
Groco Ips-38 Pressure Switch
|
134.36 |
|
|
Laing D5-38 790N, 8-24Vdc Pump
Laing Ecocirc Pump Noryl Vario Series, 5GPM at 3' Head (12V), 8-24VDC 3-35Watts Adjustable, 3/4” Hose Barb Ports, Mounting Bracket, 140Degree, 50psi
|
294.58 |
|
|
Scot Pump 913-VB 38 VACUUM BREAKER 3/8" FPT
The Vacuum Breaker has a normally closed poppet which keeps vent line fumes from the vessel. The breaker is designed for a corrosion proof service life with a protected air vent. All of the parts exposed to liquid are manufactured from Delrin. The external poppet spring is stainless steel. Liquid never touches the stainless steel spring.
The vacuum breaker has a low vacuum breakaway.
Pressure on the inside of the loop keeps the breaker closed. The soft, resilient seat gives quiet, trouble-free operation. The spring action provides a quiet opening and closing operation. Air goes in – never out.
• Type 316 Stainless Steel Loop with Vacuum BreakerStandard SAE ( Society ofAutomotive Engineers) Hose Barb on each end.
• Use for Heads, Bilge Pumps, Shower Pumps, and Engine Exhaust Lines
• Sizes 1/2 inch to 2 inches
• All head flushing water and discharge lines, engine wet exhaust lines, and bilge pump lines should have a vented loop.
• Use on marine heads, engine cooling systems, and bilge pumps.
|
28.69 |
|
|
3,500lbs A-Frame RV Jack w/Powered Drive - 12V - Black Cover
Black Cover, includes Drop Leg and Manual Override Crank
Tough & Trusted Bulldog Jacks present a Powered Jack with all the capacity and features you want.
Features:
Positions quickly with 22" of total travel
3500lb lift capacity
Integrated gearbox and motor
Drop leg
Deploys and hooks up easily at night with onboard LED courtesy light, angled to illuminate coupler
Works in case of power loss with emergency manual override capability, easily accessible from the top, crank included
Lasts for years with industry-leading BULLDOG performance, known worldwide for unmatched strength, durability, and side load capacity
Limited 5-year warranty
Measurements:
Lift Capacity(lbs): 3,500
Travel: 14"
Retracted: 9.75"
Extended: 31.50"
Clearance: 20.50"
WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
382.61 |
|
|
3,500lbs A-Frame RV Jack w/Powered Drive - 12V - White Cover
White Cover, includes Drop Leg and Manual Override Crank
Tough & Trusted Bulldog Jacks present a Powered Jack with all the capacity and features you want.
Features:
Positions quickly with 22" of total travel
3500lb lift capacity
Integrated gearbox and motor
Drop leg
Deploys and hooks up easily at night with onboard LED courtesy light, angled to illuminate coupler
Works in case of power loss with emergency manual override capability, easily accessible from the top, crank included
Lasts for years with industry-leading BULLDOG performance, known worldwide for unmatched strength, durability, and side load capacity
Limited 5-year warranty
Measurements:
Lift Capacity(lbs): 3,500
Travel: 14"
Retracted: 9.75"
Extended: 31.50"
Clearance: 20.50"
WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
382.61 |
|
|
BULLDOG Trailer Equipmant
Bulldog Jacks are tough and trusted and the choice of military and manufacturers. Gooseneck hitches, gooseneck couplers, trailer jacks, trailer couplers and Wedge-Latch reg elements feature a high-strength, heavy-duty design making them the most Tough and Trusted to hold up under rigorous working conditions. Bulldog is an industry leader in towing and trailering.
|
|
|
SCU-38 Passive GPS Antenna
The Standard Horizon SCU-38 external receiver allows your compatible Standard Horizon radios internal GPS receiver to operate even when mounted in an area where the internal GPS cannot receive a signal. Simply connect the SCU-38 and mount the antenna where it has a clear view of the sky. Cable measures 5M long.
The SCU-38 is compatible with the following Standard Horizon radios: GX1400G, GX1800G, GX1850G, and GX2400
*Please note that the SCU-38 is a passive antenna and will only work with units already equipped with a built-in GPS receiver.
|
28.00 |
|
|
Ram Mixed Combination Pin-Lock™ Security Knob/Stud/Key Knob f/ 2.25"/3.38" D/E Size Arms and Gimbal Brackets
The RAP-S-NUT5-GU replaces the knob on 2.25"/3.38" diameter D/E size arms and gimbal bracket. The RAP-S-NUT5-GU offers the ideal amount of leverage to properly tighten your mount to prevent slippage in heavy chop or in extreme vibration environments. With an emphasis on aesthetics and function, the RAP-S-NUT5-GU is low in profile and only adds a small amount of additional bulk to your system when compared to the standard knob included. At a fraction of the cost of currently available keyed locking knobs, the additional peace of mind and tamper resistance comes at a very affordable price. The RAP-S-NUT5-GU is the perfect accessory for keeping your mounted electronic device safe from theft and tampering.
Specifications/Features
The RAP-S-NUT5-G consists of the following:
1. 1/2"-20 female threaded security lock knob and stud for (Gimbal Brackets) 2. 1/4"-20 brass security jam nut for (RAM 2.25/3.38" Diameter Ball Double Socket Arms)
3. Key Knob
Material:
High Strength Composite
|
17.68 |
|
|
GA 38 GPS/GLONASS Antenna
Built to take advantage of the GLONASS system/constellation of satellites as well as standard GPS, this robust external antenna is packaged in a low-profile waterproof housing and provides 3 easy mounting solutions: pole, surface or under-deck (for the underside of fiberglass decks).
External GPS/GLONASS antennas provide increased flexibility and installation options as well as the potential for enhanced reception of GPS/GLONASS signal for those products with built-in GPS/GLONASS antennas.
In the Box
GA 38
Surface mounting bracket
Pole mounting bracket
Under-deck mounting bracket
Mounting hardware
Antenna cable (32 ft/10 m)
Installation instructions
General Specifications
Dimensions (DxH): 3 19/32" x 1 15/18" (91.6 mm x 49.5 mm)
Weight: 7.1 oz (201 g)
Temperature range: -22° F to 176° F (-30° C to 80° C)
Case material: Fully gasketed, high-impact plastic alloy, waterproof to IPX7
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
107.99 |
|
|
3-Section Adjustable Boat Hook - Adjusts 38" to 8'
Adjusts from 38" to 8' (100 to 240cm) 3 sections: 1", 1-1/8", and 1-1/4" (25, 29, and 32mm) tube dia.
The Most Dependable Twist Lock and Strongest Boat Hook End
A tough boat hook is a valuable asset when launching, docking, mooring or retrieving your favorite hat. The threaded end accepts a deck brush, mop, squeegee and other accessories. A highly visible, soft vinyl orange tip covers the threads and protects the boat's finish when fending off. All Team boat hooks float. The hook of unbreakable Lexan® is lighter than (brittle) metal alloy ends. Durability GUARANTEED to last a lifetime. Don't settle for less!
Features:
Extra Thick Neck and Body for added durability
Ribbed Hook and unbreakable Lexan® tougher by design
Curved Head for fending off stanchions and lines
3/4" (19mm) Acme Thread accepts brushes, mops, etc
Hole Molded in Tip for securing hook or attaching small line for use with tarps or awnings
|
58.50 |
|
|
Airmar R109LHW 2kW 38-75kHz & 150-250kHz Thru-Hull Transducer
This plastic thru-hull mount transducer uses the low frequencies for deep water performance and high wide frequencies for shallow water performance.
A 2 kW in a slightly smaller package, this bare wire transducer has a depth of 8,000 feet; an operating frequency of 38 to 75 kHz and 150 to 250 kHz; a beamwidth of 9x23 degrees or a constant 25 degrees; and a 0 to 25 degree deadrise.
Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
2781.55 |
|
|
Airmar R111LH 2kW In-Hull Transducer, CHIRP Low (38-75kHz) & CHIRP High (130-210kHz)
This in-hull transducer uses narrow beams at low/high frequencies to display depth and temperature data to your Garmin Marine Network via your sonar, such as the GSD 26.
Designed to allow both traditional and Spread Spectrum scanning, this 2kW barewire, plastic transducer has a maximum depth of 8,000 ft; an operating frequency of 38 to 75 kHz and 130 to 210 kHz; and a beamwidth of 10x19 degrees. The in-hull mounts on a 0-25° deadrise angle; the pocket mount is installation dependent.
Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat.
*In-hull not recommended for cored-hull vessels
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
2828.99 |
|
|
RAM Double Socket Arm f/3-3/8" Ball Bases
Part #: RAM-E-201U
The RAM-E-201U double socket arm has a socket at both ends that accommodates 3.38" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. The socket technology allows for almost infinite adjustment and perfect viewing angles.
Dimensions:
Overall Length: 12.625"
Socket to Socket Length: 9.875"
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
3.38" Rubber Ball E Size
|
158.98 |
|