MATE SERIES Why cut two holes in your boat when one will do? Mate Series Combination Rod & Cup Holders function exactly like a standard cup holder and fishing rod holder combined. What this means is that a boat equipped with four cup holders and four rod holders would only need four Mate Series to do the same job. The result is a vessel with a less cluttered appearance that is easier to maintain.

Stainless Steel Backing Plate For use with all Mate Series Rod and Cup Holders

LED Light Ring Features: Red, Green and Blue LED Up to 16 Million Colors Fits All Round Top Mate Series Combination Rod & Cup Holders 12V source Required

Stainless Steel Rod & Cup Holder Threaded Backing Plate This threaded backing plate is designed to be used with ALL Mate Series Combination Rod and Cup Holders EXCEPT Elite Screw-less. Features: Cast 316L Stainless Steel Access to the underside is NOT required Machine screws included

Replacement Power & Data Cable for XB & WatchMate Series - 6' Replacement power cable (2M/6.5') for Vesper XB and WatchMate series AIS transponders, receivers, or displays.

Charge Mate 2502 A secondary battery is becoming increasingly common. As a second battery can prevent the main battery from depleting and being unable to start, this seems like a safe and reliable solution. The second battery, however, also has to be charged regularly. The Charge Mate series connects both batteries during charging and keeps them isolated when discharging. The Charge Mate 1202 and 2502 are especially practical for small systems. General Specifications: Battery voltage: 12/24V Max. current: 500 A Number of modes: On, off, auto, start to assist Dimensions, hxwxd: 90 x 80 x 85 mm/3.5 x 3.1 x 3.3 inch Weight: 0.65 kg/1.4 lb Compliance: CE Technical Specifications: Power consumption: switch open: < 1 mA at 12/24 V DC Inrush current (250 ms): 2000 A Switch on voltage: 13-15 V (12 V) / 26-30 V (24 V) Switch on delay: 30 sec Switch off voltage: < 12.25 V... > 15 (12 V) / < 25.5... > 30 V (24 V) Switch off delay: 3 minutes Relay: Electro-mechanical Temperature range (ambient temp.): -40 °C to 60 °C/-40 °F to 140 °F Protection degree: IP21 WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Charge Mate 1202 A secondary battery is becoming increasingly common. As a second battery can prevent the main battery from depleting and being unable to start, this seems like a safe and reliable solution. The second battery, however, also has to be charged regularly. The Charge Mate series connects both batteries during charging and keeps them isolated when discharging. The Charge Mate 1202 and 2502 are especially practical for small systems. General Specifications: Battery voltage: 12/24 V Max. current: 120 A Dimensions, hxwxd: 76 x 46 x 46 mm/3.0 x 1.8 x 1.8 inch Weight: 0.125 kg/0.3 lb Compliance: CE Technical Specifications: Power consumption: Switch open: < 1 mA at 12/24 V DC Inrush current (250 ms): 2000 A Switch on voltage: 13-15 V (12 V) / 26-30 V (24 V) Switch on delay: 5 sec Switch off voltage: < 12.75 V (12 V) / < 25.5 V (24 V) Switch off delay: No Relay: Electro-mechanical Temperature range (ambient temp.): -40 °C to 65 °C/-40 °F to 149 °F Protection degree: IP21 WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Gianneschi SGM45 Brush GM4 7X14 (Cp25/1)

Gianneschi SGM45A Brushes For CP25/1

3′ Flag Pole for Rod Holders/ Rocket Launchers. The 3′ Flag Pole is perfect for your 12″x18″ OR 20″x24″ Flags. The 6’ Pole will hold 3’x5’ and larger. These flag poles were designed and built in South Florida and are made to withstand the harsh marine environment. The pole is constructed of 1/2″ fiberglass rod material which is remarkably flexible, non conductive, and extremely durable. The rod end is affixed with a gimbal mount designed to slide right into your rod holders and/or rocket launchers. Attaching your flag is easy with the included pennant mounts and stainless clips.

3′ Flag Pole with USA Flag for Rod Holders/ Rocket Launchers. USA Flag included, along with pole. The 3′ Flag Pole is perfect for your 12″x18″ OR 20″x24″ Flags. The 6’ Pole will hold 3’x5’ and larger. These flag poles were designed and built in South Florida and are made to withstand the harsh marine environment. The pole is constructed of 1/2″ fiberglass rod material which is remarkably flexible, non conductive, and extremely durable. The rod end is affixed with a gimbal mount designed to slide right into your rod holders and/or rocket launchers. Attaching your flag is easy with the included pennant mounts and stainless clips.

3′ Flag Pole with Dive Flag for Rod Holders/ Rocket Launchers. Dive Flag included, along with pole. The 3′ Flag Pole is perfect for your 12″x18″ OR 20″x24″ Flags. The 6’ Pole will hold 3’x5’ and larger. These flag poles were designed and built in South Florida and are made to withstand the harsh marine environment. The pole is constructed of 1/2″ fiberglass rod material which is remarkably flexible, non conductive, and extremely durable. The rod end is affixed with a gimbal mount designed to slide right into your rod holders and/or rocket launchers. Attaching your flag is easy with the included pennant mounts and stainless clips.

6′ Flag Pole for Rod Holders/ Rocket Launchers. The 3′ Flag Pole is perfect for your 12″x18″ OR 20″x24″ Flags. The 6’ Pole will hold 3’x5’ and larger. These flag poles were designed and built in South Florida and are made to withstand the harsh marine environment. The pole is constructed of 1/2″ fiberglass rod material which is remarkably flexible, non conductive, and extremely durable. The rod end is affixed with a gimbal mount designed to slide right into your rod holders and/or rocket launchers. Attaching your flag is easy with the included pennant mounts and stainless clips.

6′ Flag Pole with USA Flag for Rod Holders/ Rocket Launchers. USA Flag included, along with pole. The 3′ Flag Pole is perfect for your 12″x18″ OR 20″x24″ Flags. The 6’ Pole will hold 3’x5’ and larger. These flag poles were designed and built in South Florida and are made to withstand the harsh marine environment. The pole is constructed of 1/2″ fiberglass rod material which is remarkably flexible, non conductive, and extremely durable. The rod end is affixed with a gimbal mount designed to slide right into your rod holders and/or rocket launchers. Attaching your flag is easy with the included pennant mounts and stainless clips.

6′ Flag Pole with Dive Flag for Rod Holders/ Rocket Launchers. Dive Flag included, along with pole. The 3′ Flag Pole is perfect for your 12″x18″ OR 20″x24″ Flags. The 6’ Pole will hold 3’x5’ and larger. These flag poles were designed and built in South Florida and are made to withstand the harsh marine environment. The pole is constructed of 1/2″ fiberglass rod material which is remarkably flexible, non conductive, and extremely durable. The rod end is affixed with a gimbal mount designed to slide right into your rod holders and/or rocket launchers. Attaching your flag is easy with the included pennant mounts and stainless clips.