|
keywords: Golight, golight led lights, led lighting, led spotlight, led searchlight
|
|
|
D-SS Driving, Spot & Flood LED Lights
One of Rigid's most versatile, compact lighting solutions just got better with the D-SS, Dually Side Shooter LED cube. Perfect for any application that requires a wide spread beam, including A-Pillars, Fog Lights, and motorcycle applications.
The D-SS cube incorporates the same powerful optics and legendary LED technology as Rigid's popular D-Series lights but with the added benefit of additional LEDs aimed to the side for a much broader beam. The D-SS fixtures boast up to 120-degrees of horizontal lighting coverage when used in pairs or when used in the single light applications. The main forward-facing LEDs are available with Rigid's advanced Flood, Spot, or Driving optics, so there's a D-SS lighting solution for nearly any application.
The D-SS LED lights are available in pairs with three side-shooting LEDs on one side of each fixture, or in single applications with a pair of side-shooting LEDs on both sides of the fixture. Only Rigid provides a broad, powerful lighting solution in such a compact package.
Ignite Surface Mount Diffused, Flood & Spot LED Lights
The Rigid Ignite™ is the smallest, most versatile light in Rigid Industries' product line! Measuring approximately 1.4” x 1.4” x 2”, this flexible light packs 1000 raw lumens using Spot, Flood or Diffused beam patterns; perfect for any application where short range light output is needed.
The Ignite also utilizes a Go-Pro® style mounting bracket which mates with an array of off the shelf Go-Pro mounts. Due to the wide range of mounting options, the Ignite's applications are almost limitless. The compact and lightweight housing makes the Ignite a great choice for auxiliary lighting on cars and trucks, motorcycles, UTVs, and even marine applications. Low current draw (less than 1 amp) and voltage requirements (6-28 volts) makes the Ignite adaptable to any application.
*Single light kits include one Ignite, mounting brackets, and related hardware. GoPro Mount Not Included.
Specials Closeouts Remanufactured Rebates
|
|
|
Heise LED Lighting Systems
Heise LED Lighting, by Metra Electronics are exclusively developed and manufactured to meet all international standards. The range of lighting integrates advanced thermal management, short circuit and open circuit protection and many other innovative features.
|
|
|
Wireless Remote Control & Relay Harness
From the leader in the lighting industry. This wireless RF remote control and and relay harness is the standard in making any Heise light function via remote control.
The HE-WRRK is a wireless remote control and receiver with a simple 2 wire connection to the battery so no wires are needed to be ran inside the vehicle. It is designed to be used with one HEISE LED light bar, driving light, or work light.
If an additional light bar is desired the HE-EYHK (Y ADAPTER HARNESS KIT) can be purchased which allows two HEISE light bars, driving lights, or work lights 150 watts or less each to be used with the HE-WRRK
Specifications:
Nine (9) Different Flash Options
9' Harness Length
Black in color
In the Box:
One (1) Remote Control Receiver
One (1) Battery Operated FOB
One (1) Extension
One (1) Adapter
*Sold as an Individual
|
73.39 |
|
|
DT Pigtails with Wires - 10-Pack
From the leader in the lighting industry. The DT Pigtail with wire is designed to be wired to HEISE LED lights that do not come equipped with a plug. The DT Pigtail in combination with the DT Wiring Harness & Switch Kit (HE-SLWH1) or the Universal Wiring Harness & Switch Kit (HE-DLWH1) provides a universal wiring solution for wire runs of up to 10' and lights up to 150 watts.
Specifications:
12" in Length
Black in color
*Sold in a 10 Pack
|
36.89 |
|
|
DT Plug with Wire - 10-Pack
From the leader in the lighting industry. The DT Plug with wire is designed to be wired to HEISE LED lights that do not come equipped with a plug. The DT Plug in combination with the DT Wiring Harness & Switch Kit (HE-SLWH1) or the Universal Wiring Harness & Switch Kit (HE-DLWH1) provides a universal wiring solution for wire runs of up to 10' and lights up to 150 watts.
Specifications:
12" in Length
Black in color
*Sold in a 10 Pack
|
41.58 |
|
|
T-Top Tube Light w/Aluminum Housing - White/Red LED Lights
LED Lights - Hard Wired
High output, low glare
Vibration & shock-resistant LEDs
Less than 1/4 amp draw won't drain battery
Impact-resistant & water resistant ideal for marine & other outdoor uses
T-Top Light
108 LEDs provide high output, low glare light
Switch from white light to red light for chart-reading
Impact-resistant Polycarbonate lens
Polished anodized aluminum housing
Pre-drilled for easy mounting
14' wiring cable to accommodate most tops & bridges
|
158.02 |
|
|
T-Top Tube Light w/Aluminum Housing - White/Blue LED Lights
LED Lights - Hard Wired
High output, low glare
Vibration & shock-resistant LEDs
Less than 1/4 amp draw won't drain battery
Impact-resistant & water resistant ideal for marine & other outdoor uses
T-Top Light
108 LEDs provide high output, low glare light
Switch from white light to red light for chart-reading
Impact-resistant Polycarbonate lens
Polished anodized aluminum housing
Pre-drilled for easy mounting
14' wiring cable to accommodate most tops & bridges
|
158.02 |
|
|
Shadow-Caster LED Lighting
Shadow Caster specializes in the design and manufacturing of a complete range of innovative LED lighting products and accessories. From marine lighting to patio systems, Shadow Caster offers a wide array of products to fit all of your lighting needs. Shadow Caster specializes in lights that are exceptionally bright, robust and efficient for both marine and terrestrial applications.
|
|
|
Safety First when it comes to Trailer Lighting
Safety is important, not only on the water, but on the road going to and coming from the water. If your trailer is more than a few years old, most likely you have had or are having some issues with the lights and the electrical system on your trailer. Fortunately, most issues are pretty easy to fix.
The first thing to do is to test the lights by hooking up to the vehicle harness and checking all lights to make sure they are bright and working. If any are dim or not functioning, connect a tester to the vehicle harness to see if there might be an issue with the electrical source. Cleaning the connectors of the harness on both the vehicle and trailer side is critical, and can easily be done with a can of electrical connector spray and a fine wire brush. Also, clean the ground contact and tighten the ground wire.
Make sure to check the ground screw and replace it if it is corroded. Most bulbs are easily replaceable by simply twisting them to remove and install them. You can also clean up corroded sockets by gently sanding away the corrosion with fine sandpaper. It's possible you may have to replace wiring, which can be purchased as part of a complete kit that includes new lights, connectors, and lenses.
We suggest if you do not have LED light on your trailer to switch over to them. Led lights are brighter, more efficient and has multiply bulbs so you will never have a taillight completely unlit if one bulb burns out.
CLR Marine carries trailer lights and lighting kits, which are complete with license plate holder, wiring and side lights. Along with any other trailer accessory you may need.
Specials Closeouts Remanufactured Rebates
|
|
|
Blackout Cube LED Light *2-Pack
Heise’s Blackout Series high output cube LED lights are small but powerful for better coverage at night. These next-generation lights have refined frames and cleaner lines for a sleek yet minimalistic look. The upgraded optics have changed from a direct to an indirect placement allowing more control of the location and pattern of the beam. This allows the lights to be tailored to the vehicle, its entire lighting system, and for the driver’s lighting coverage needs. Each set is rated IP67 and includes a dual light wiring harness (HE-DLWH1) for installation. Flush mount options are also available and sold individually (without harness).
Features:
2 Light Pack
Input Voltage: 12-24V Dc
Color Temperature: 5700K
Beam Pattern: 10o Spot
Housing Material: Die-Cast Aluminum
Color: Black
Lens Material: Polycarbonate
Electronics: Integrated-Epoxy Encapsulated
Hardware: Stainless 316
Operating Temperature: -40°F To +140°F
Protection: Reverse Polarity
Mounting: Side & Rear
Limited Lifetime Warranty
Specifications:
Size: 2.5”
4 LEDs
Wattage: 20W
Raw Lumens: 1,920lm
Lux at 10m: 635
Current Consumption @ 13.8V: 1.3A
IP Rating: IP67
*Values are for a single light
Vehicle Applicatins:
Universal
*WARNING: THIS LIGHTING PRODUCT IS SOLD FOR OFF-ROAD USE ONLY. This product should not be used on the road. Owners should keep the original factory bulbs so that they can replace them for use on public roads. Keep the box that the new bulbs came in to store the bulbs and be sure to handle them with care when removing and re-installing.
|
136.56 |
|
|
Dual Row Blackout LED Lightbar - 14"
An improved design makes the latest generation of Heise Blackout Series LED lights a versatile lighting solution for different vehicles and uses. Function meets style with refined frames and cleaner lines for a sleek yet minimalistic look. The upgraded optics have changed from a direct to an indirect placement allowing more control of the location and pattern of the beam. This allows the lights to be tailored to the vehicle, its entire lighting system, and for the driver’s lighting coverage needs.
The hybrid 90° flood and 8° spot beam pattern combination deliver the best of both worlds with intense spotlights in the center flanked by widebeam lights on each side. Heise’s protective vent port allows for internal moisture to escape and prevents any external moisture from entering the lightbar housing.
Features:
Input Voltage: 10-30V Dc
Color Temperature: 5700K
Beam Pattern: Combo: 90° Flood / 8° Spot
Housing Material: Die-Cast Aluminum
Color: Black
Membrane: Protective Vent Port
Lens Material: Polycarbonate
Mounting Bolt Drill: 0.25”
Electronics: Integrated-Epoxy Encapsulated
Hardware: Stainless 316
Operating Temperature: -40°F To +140°F
Protection: Reverse Polarity
Mounting: Side & Rear
Limited Lifetime Warranty
Specifications:
Length: 14”
Wattage: 120W
Raw Lumens: 10,080lm
Lux at 10m: 3666
Current Consumption @ 13.8V: 3.8A
IP Rating: IP67
Vehicle Applications:
Universal
|
157.08 |
|
|
Dual Row Blackout LED Lightbar - 22"
An improved design makes the latest generation of Heise Blackout Series LED lights a versatile lighting solution for different vehicles and uses. Function meets style with refined frames and cleaner lines for a sleek yet minimalistic look. The upgraded optics have changed from a direct to an indirect placement allowing more control of the location and pattern of the beam. This allows the lights to be tailored to the vehicle, its entire lighting system, and for the driver’s lighting coverage needs.
The hybrid 90o flood and 8o spot beam pattern combination deliver the best of both worlds with intense spotlights in the center flanked by widebeam lights on each side. Heise’s protective vent port allows for internal moisture to escape and prevents any external moisture from entering the lightbar housing.
Features:
Input Voltage: 10-30V Dc
Color Temperature: 5700K
Beam Pattern: Combo 90° Flood / 8° Spot
Housing Material: Die-Cast Aluminum
Color: Black
Membrane: Protective Vent Port
Lens Material: Polycarbonate
Mounting Bolt Drill:0.25”
Electronics: Integrated-Epoxy Encapsulated
Hardware: Stainless 316
Operating Temperature: -40°F To +140°F
Protection: Reverse Polarity
Mounting: Side & Rear
Limited Lifetime Warranty
Specifications:
Length: 22”
Wattage: 200W
Raw Lumens: 16,800lm
Lux at 10m: 6461
Current Consumption @ 13.8V: 6.7A
IP Rating: IP67
Vehicle Applications:
Universal
|
222.54 |
|
|
32" Blackout Dual Row - 60 LED - Lightbar
Heise Blackout Series LED lights are a versatile lighting solution for different vehicles and use. Function meets style with refined frames and cleaner lines for a sleek yet minimalistic look. The upgraded optics have changed from a direct to an indirect placement allowing more control of the location and pattern of the beam. This allows the lights to be tailored to the vehicle, its entire lighting system, and for the driver’s lighting coverage needs.
The hybrid 90o flood and 8o spot beam pattern combination deliver the best of both worlds with intense spotlights in the center flanked by wide beam lights on each side. Heise’s protective vent port allows for internal moisture to escape and prevents any external moisture from entering the light bar housing.
Features:
Input Voltage: 10-30V Dc
Color Temperature: 5700K
Beam Pattern: Combo 90o Flood / 8o Spot
Housing Material: Die-Cast Aluminum
Color: Black
Membrane: Protective Vent Port
Lens Material: Polycarbonate
Mounting Bolt Drill: 0.25”
Electronics: Integrated-Epoxy Encapsulated
Hardware: Stainless 316
Operating Temperature: -40oF To +140oF
Protection: Reverse Polarity
Mounting: Side & Rear
Limited Lifetime Warranty
Specifications:
Length: 32”
Wattage: 300W
Raw Lumens: 25,200lm
Lux at 10m: 8624
Current Consumption @ 13.8V: 9.3A
IP Rating: IP67
Vehicle Applications:
Universal
|
334.55 |
|
|
42" Blackout Dual Row - 80 LED - Lightbar
Heise Blackout Series LED lights are a versatile lighting solution for different vehicles and use. Function meets style with refined frames and cleaner lines for a sleek yet minimalistic look. The upgraded optics have changed from a direct to an indirect placement allowing more control of the location and pattern of the beam. This allows the lights to be tailored to the vehicle, its entire lighting system, and for the driver’s lighting coverage needs.
The hybrid 90o flood and 8o spot beam pattern combination deliver the best of both worlds with intense spotlights in the center flanked by wide beam lights on each side. Heise’s protective vent port allows for internal moisture to escape and prevents any external moisture from entering the light bar housing.
Features:
Input Voltage: 10-30V Dc
Color Temperature: 5700K
Beam Pattern: Combo 90o Flood / 8o Spot
Housing Material: Die-Cast Aluminum
Color: Black
Membrane: Protective Vent Port
Lens Material: Polycarbonate
Mounting Bolt Drill: 0.25”
Electronics: Integrated-Epoxy Encapsulated
Hardware: Stainless 316
Operating Temperature: -40oF To +140oF
Protection: Reverse Polarity
Mounting: Side & Rear
Limited Lifetime Warranty
Specifications:
Length: 42”
Wattage: 400W
Raw Lumens: 33,600lm
Lux at 10m: 11500
Current Consumption @ 13.8V: 13.5A
IP Rating: IP67
Vehicle Applications:
Universal
|
424.48 |
|