|
Gianneschi KACB33203C Kit ACB 332 230/400V 3Ph
|
870.97 |
|
|
Flojet 02100-332 Pump 24V 2.1/60 Pss Sw
Flojet- Diaphragm Pump Duplex 24V, 3/8"FNPT Ports, 2.1GPM, 60psi Switch, Polypropylene, EPDM Valves, Santoprene Diaphragm
|
258.21 |
|
|
Gianneschi SGM45 Brush GM4 7X14 (Cp25/1)
|
44.85 |
|
|
Gianneschi SGM45A Brushes For CP25/1
|
38.21 |
|
|
Flotec FP4332 Thermoplastic Convertible Jet Pump 1 HP
Corrosion resistant convertible jet pumps are constructed of rugged fiberglass-reinforced thermoplastic, and assure years of dependable service.
KEY FEATURES
Superior performance at depths to water of 100' or less
Fiberglass-reinforced thermoplastic pump housing for the highest corrosion resistance
Ready-to-install 230 volt motor - see manual for 115 volt conversion
WARRANTY
1 year limited warranty
BODY CONSTRUCTION: Thermoplastic
HORSEPOWER: 1
MAXIMUM CAPACITY: 20.7 GPM (shallow setup)
FLOW at 10' LIFT and 40 PSI: 18.3 GPM (shallow setup)
MAX LIFT: 25' for shallow setup / 90' for deep setup
MAXIMUM PRESSURE: 52 psi for shallow / 56 psi for deep
PRESSURE SWITCH SETTING: 30/50
SUCTION PIPE SIZE: 1-1/4" NPT
DRIVE PIPE SIZE: 1" NPT
DISCHARGE PIPE SIZE: 1" NPT
AMP DRAW: 7.4 amps on 230v / 14.8 amps on 115v
VOLTAGE: 230v / 115v, 60 Hz
RECOMMENDED BREAKER: 15 amp for 230v / 20 amp for 115v
MAXIMUM WATER TEMPERATURE: 140 F (60 C)
|
698.25 |
|
|
Micropump DC332A.C 24Vdc Motor with C Mount
The DC-332A.C is an intermittent duty, 0-24VDC, Brush Type, Permanent Magnet Drive for the GA and GJ (N21) series pumps.
|
3197.59 |
|
|
Ampco Pumps P1SX120332 Bearing Retainer
|
106.47 |
|
|
Gianneschi ACB332-24V 1 1/4" Self Prime 24V
Main pump features:
Outstanding self-priming
Side channel and liquid ring construction
Simple and compact
Applications:
Ballast
Bilge
Diesel oil
F.W./S.W. Washing
Fire-fighting
S.W feeding
WPS - Hydrofore
Port Size: From 1'' 1/4 to 1'' 1/2 BSP
Pump casing: Bronze
Impeller / Gear: Bronze
Shaft: Stainless steel
|
5133.35 |
|
|
Don't miss out with super savings from CLR Marine! It's that time of year, and we are offering a Spring Launch Sale to kick off the season. Enjoy savings on 303, Bulldog, C.E. Smith, CRC Industries, Fortress Marine Anchors, Fulton, Marykate, Meguiar's, Presta, Raritan, Robline Dockline, STA-BIL, Tigress, and Wesbar. The Spring Launch Sale is valid now until April 30th, 2020.
|
|
|
Lighted Rocker Switch
This Switch features a lighted rocker with protective rubber boot and is a great addition to any RIGID Industries lighting system. This switch will fit all RIGID Industries wiring harnesses. This product requires a 3/4" hole to mount.
Features:
Lighted for Better Visibility
Water Resistant
Protective Rubber Boot
Works with All RIGID Industries Wiring Harnesses
|
12.74 |
|
|
2x10 115° DC Scene Light Black - White LED
LED Scene Lighting by RIGID Industries is now available for any area lighting application using DC power. Utilizing the latest LED technology, RIGID Industries perfects their innovative rugged design, thermally optimized heatsink, extreme output, and does it with minimal amp draw for the total lighting solution. With a 115-degree horizontal spread, this product will light the surrounding area perfectly.
Features:
Family: Scene Lighting
Optics: Scene Lighting
LED Color: White
Finish Color: Black
Mount Type: Bolt DownPole MountSurface
Shipping Dimensions: 15" x 9.5" x 3.75"
Sold As: Single
DC Power
Thermally optimized heatsink technology
Extreme Output
Minimum Amp Draw for the total lighting solution
115° horizontal spread
Specifications:
Watts: 76
Amp Draw: 5.28
LED's: 9
Raw Lumens: 8,190
Lux @ 10m: 21.84
Peak Beam Intensity: 2,184 cd
|
524.99 |
|
|
Wire Harness - High Power f/40" - 50" Light Bar
This 13' wiring harness is designed to connect a single 40"-50" LED light bar to your 12V electrical system. It features battery terminals on one end and a Deutsch connector on the other to connect to the light. It incorporates an inline fuse holder, a 12V relay, and a waterproof switch. This harness is compatible with the following RIGID Industries LED Lights: 50" E-Series, 50" SR-Series.
Features:
14 AWG Wire
Deutsch Connector
Inline Fuse Holder
|
45.37 |
|
|
Wire Harness f/10"-30" Light Bar
This 11' wiring harness is designed to connect a single 10"-30" LED light bar to your 12V electrical system. It features battery terminals on one end and a Deutsch connector on the other to connect to the light. It incorporates an inline fuse holder, a 12V relay, and a waterproof switch. This harness is compatible with the following RIGID Industries LED Lights: 10" E-Series, 10" SR-Series, 20" E-Series, 20" SR-Series, 30" E-Series, 30" SR-Series, 40" E-Series, 40" SR-Series.
Features:
16 AWG Wire
Deutsch Connector
Inline Fuse Holder
12 Volt Relay
|
40.12 |
|
|
Wire Harness f/4"-6" Light Bar
This 11' wiring harness is designed to connect a single LED light to your 12V electrical system. It features battery terminals on one end and a Deutsch connector on the other to connect to the light. It incorporates an inline fuse holder, and a waterproof switch. This harness is compatible with the following RIGID Industries LED Lights: Dually (Single), D2 (Single), 4" E-Series, 6" E-Series, 4" SR-Series, 6" SR-Series.
Features:
18 AWG Wire
Deutsch Connector
Inline Fuse Holder
|
32.09 |
|
|
Wire Harness f/Dually Pair
This 14' wiring harness is designed to connect a pair of Dually LED lights to your 12V electrical system. It features battery terminals on one end and Deutsch connectors on the other to connect to the lights. It incorporates an inline fuse holder, and a waterproof switch. This harness is compatible with the following RIGID Industries LED Lights: Dually (Pair).
Features:
18 AWG Wire
Deutsch Connector
Inline Fuse Holder
|
32.09 |
|