|
Gianneschi SGM45A Brushes For CP25/1
|
38.21 |
|
|
Gianneschi SGM45 Brush GM4 7X14 (Cp25/1)
|
44.85 |
|
|
Yamada 772689 Nylon Throat Brg
|
52.79 |
|
|
Yanmar 119578-42680 Bearing Retainer
|
11.49 |
|
|
MP Pump 34268 Pump Fm10Ppk C:Ccmtr 1.13
|
2006.10 |
|
|
C-Series Toggle DC Double Pole
PN: 7268
Poles: 2
Color: White
Amperage: 175A
Features:
Provides overcurrent protection for inverters, bow thrusters, and windlasses
Combines switching and circuit protection into a single device
"Trip Free" - cannot be held closed after trip
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
116.02 |
|
|
8268
Contura Switch Mounting Panel
1 Position Mounting Panel
Modular design permits easy assembly in groups of varying sizes
Designed for mounting in 6 different panel thicknesses:
0.06" (1.57mm) 0.09" (2.36mm) 0.13" (3.17mm)
0.19" (4.75mm) 0.25" (6.35mm) 0.38" (9.52mm)
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
2.90 |
|
|
PowerFilm, Inc. is a developer and manufacturer of thin, flexible solar panels based on a proprietary low cost production process.
|
|
|
MB-69 Flush Mount Kit
Specifically used for flush-mounting Icom's M45, M402, M302 or the M422 to a flat surface.
Compatible Devices:
M402
M304
M422
|
35.92 |
|
|
PRO Shaft Seal 1-3/4" Shaft & 3-1/2" Tube
The PSS PRO Shaft Seal is a mechanical face seal utilizing our proven stainless steel and carbon sealing components but adds reinforced silicone bellows, a secondary shaft retention collar, 316 Stainless Steel hose clamps (rolled edges and non-perforated), and an optional Nitronic 50 rotor upgrade (for highly corrosive environments). Designed specifically for applications that will require increased durability and resistance to harsh, corrosive, high pressure, and otherwise demanding environments. The PSS PRO Shaft Seal is a specialized mechanical seal suitable for various applications, with unmatched performance.
As with PSS Type A & B Seals, The PRO Shaft Seal is a mechanical face seal. The sealing surface is created between the flat surfaces of the rotating stainless-steel rotor and the stationary carbon flange. The stationary carbon flange is attached to a heavy-duty silicone bellows attached to the vessel’s stern tube (shaft log), with 316SS hose clamps. The stainless-steel rotor is fitted on the shaft in front of the carbon flange and is used to compress the bellows, the rotor is then secured to the shaft with set screws, and the shaft retention collar is installed. This compression (pre-load) maintains constant contact between the two mating faces of the stainless-steel rotor and carbon flange, allowing the PSS to compensate for the variable axial movement due to propeller thrust. In addition, the carbon flange is over-bored to the shaft diameter allowing it to "float" around the shaft and thus compensate for most misalignment and vibration from the drive-line. The stainless-steel rotor is sealed to the shaft by two O-rings recessed into the rotor's bore. These O-rings rotate with the shaft and the stainless-steel rotor and therefore do not experience wear during operation.
Specifications:
Temperature Limits: -13°F to 425°F (-25°C to 220°C)
Pressure Limits: 40 PSI (2.75 BAR)
Shaft RPM Limits: 10,000 RPM
Carbon Graphite: Lapped to 4 HLB (0.000044" tolerance)
316SS / Nitronic 50: Faced to 9 Ra
Bellow Material: Molded formed silicone / fabric
Product Dimensions:
Shaft Dia. (A) 1-3/4"
Stern Tube Dia. (B) 3-1/2" to 3-5/8"
Uncompressed Length (C) 9.268"
Approx. Compressed Length 8.268"
Rotor Diameter (D) 3.75"
Stern Cuff Length (E) 1.3"
|
546.00 |
|
|
PRO Shaft Seal 2" Shaft & 3-1/2" Tube
The PSS PRO Shaft Seal is a mechanical face seal utilizing our proven stainless steel and carbon sealing components but adds reinforced silicone bellows, a secondary shaft retention collar, 316 Stainless Steel hose clamps (rolled edges and non-perforated), and an optional Nitronic 50 rotor upgrade (for highly corrosive environments). Designed specifically for applications that will require increased durability and resistance to harsh, corrosive, high pressure, and otherwise demanding environments. The PSS PRO Shaft Seal is a specialized mechanical seal suitable for various applications, with unmatched performance.
As with PSS Type A & B Seals, The PRO Shaft Seal is a mechanical face seal. The sealing surface is created between the flat surfaces of the rotating stainless-steel rotor and the stationary carbon flange. The stationary carbon flange is attached to a heavy-duty silicone bellows attached to the vessel’s stern tube (shaft log), with 316SS hose clamps. The stainless-steel rotor is fitted on the shaft in front of the carbon flange and is used to compress the bellows, the rotor is then secured to the shaft with set screws, and the shaft retention collar is installed. This compression (pre-load) maintains constant contact between the two mating faces of the stainless-steel rotor and carbon flange, allowing the PSS to compensate for the variable axial movement due to propeller thrust. In addition, the carbon flange is over-bored to the shaft diameter allowing it to "float" around the shaft and thus compensate for most misalignment and vibration from the drive-line. The stainless-steel rotor is sealed to the shaft by two O-rings recessed into the rotor's bore. These O-rings rotate with the shaft and the stainless-steel rotor and therefore do not experience wear during operation.
Specifications:
Temperature Limits: -13°F to 425°F (-25°C to 220°C)
Pressure Limits: 40 PSI (2.75 BAR)
Shaft RPM Limits: 10,000 RPM
Carbon Graphite: Lapped to 4 HLB (0.000044" tolerance)
316SS / Nitronic 50: Faced to 9 Ra
Bellow Material: Molded formed silicone / fabric
Product Dimensions:
Shaft Dia. (A) 2"
Stern Tube Dia. (B) 3-1/2" to 3-5/8"
Uncompressed Length (C) 9.268"
Approx. Compressed Length 8.268"
Rotor Diameter (D) 3.75"
Stern Cuff Length (E) 1.3"
|
628.50 |
|
|
PRO Shaft Seal 2" Shaft & 3" Tube
The PSS PRO Shaft Seal is a mechanical face seal utilizing our proven stainless steel and carbon sealing components but adds reinforced silicone bellows, a secondary shaft retention collar, 316 Stainless Steel hose clamps (rolled edges and non-perforated), and an optional Nitronic 50 rotor upgrade (for highly corrosive environments). Designed specifically for applications that will require increased durability and resistance to harsh, corrosive, high pressure, and otherwise demanding environments. The PSS PRO Shaft Seal is a specialized mechanical seal suitable for various applications, with unmatched performance.
As with PSS Type A & B Seals, The PRO Shaft Seal is a mechanical face seal. The sealing surface is created between the flat surfaces of the rotating stainless-steel rotor and the stationary carbon flange. The stationary carbon flange is attached to a heavy-duty silicone bellows attached to the vessel’s stern tube (shaft log), with 316SS hose clamps. The stainless-steel rotor is fitted on the shaft in front of the carbon flange and is used to compress the bellows, the rotor is then secured to the shaft with set screws, and the shaft retention collar is installed. This compression (pre-load) maintains constant contact between the two mating faces of the stainless-steel rotor and carbon flange, allowing the PSS to compensate for the variable axial movement due to propeller thrust. In addition, the carbon flange is over-bored to the shaft diameter allowing it to "float" around the shaft and thus compensate for most misalignment and vibration from the drive-line. The stainless-steel rotor is sealed to the shaft by two O-rings recessed into the rotor's bore. These O-rings rotate with the shaft and the stainless-steel rotor and therefore do not experience wear during operation.
Specifications:
Temperature Limits: -13°F to 425°F (-25°C to 220°C)
Pressure Limits: 40 PSI (2.75 BAR)
Shaft RPM Limits: 10,000 RPM
Carbon Graphite: Lapped to 4 HLB (0.000044" tolerance)
316SS / Nitronic 50: Faced to 9 Ra
Bellow Material: Molded formed silicone / fabric
Product Dimensions:
Shaft Dia. (A) 2"
Stern Tube Dia. (B) 3" to 3-1/8"
Uncompressed Length (C) 9.268"
Approx. Compressed Length 8.268"
Rotor Diameter (D) 3.75"
Stern Cuff Length (E) 1.3"
|
628.50 |
|
|
PRO Shaft Seal 1-3/4" Shaft & 3" Tube
The PSS PRO Shaft Seal is a mechanical face seal utilizing our proven stainless steel and carbon sealing components but adds reinforced silicone bellows, a secondary shaft retention collar, 316 Stainless Steel hose clamps (rolled edges and non-perforated), and an optional Nitronic 50 rotor upgrade (for highly corrosive environments). Designed specifically for applications that will require increased durability and resistance to harsh, corrosive, high pressure, and otherwise demanding environments. The PSS PRO Shaft Seal is a specialized mechanical seal suitable for various applications, with unmatched performance.
As with PSS Type A & B Seals, The PRO Shaft Seal is a mechanical face seal. The sealing surface is created between the flat surfaces of the rotating stainless-steel rotor and the stationary carbon flange. The stationary carbon flange is attached to a heavy-duty silicone bellows attached to the vessel’s stern tube (shaft log), with 316SS hose clamps. The stainless-steel rotor is fitted on the shaft in front of the carbon flange and is used to compress the bellows, the rotor is then secured to the shaft with set screws, and the shaft retention collar is installed. This compression (pre-load) maintains constant contact between the two mating faces of the stainless-steel rotor and carbon flange, allowing the PSS to compensate for the variable axial movement due to propeller thrust. In addition, the carbon flange is over-bored to the shaft diameter allowing it to "float" around the shaft and thus compensate for most misalignment and vibration from the drive-line. The stainless-steel rotor is sealed to the shaft by two O-rings recessed into the rotor's bore. These O-rings rotate with the shaft and the stainless-steel rotor and therefore do not experience wear during operation.
Specifications:
Temperature Limits: -13°F to 425°F (-25°C to 220°C)
Pressure Limits: 40 PSI (2.75 BAR)
Shaft RPM Limits: 10,000 RPM
Carbon Graphite: Lapped to 4 HLB (0.000044" tolerance)
316SS / Nitronic 50: Faced to 9 Ra
Bellow Material: Molded formed silicone / fabric
Product Dimensions:
Shaft Dia. (A) 1-3/4"
Stern Tube Dia. (B) 3" to 3-1/8"
Uncompressed Length (C) 9.268"
Approx. Compressed Length 8.268"
Rotor Diameter (D) 3.75"
Stern Cuff Length (E) 1.3"
|
546.00 |
|
|
Solar Piling Cap Light
Part #: 96-268-F
Dock Edge's solar piling cap lights automatically come on at dusk turn off at dawn and provide 360 degrees of illumination for docking your boat or just dock safety at night. The solar piling cap lights are completely waterproof made of durable UV resistant ABS.
Features:
360 degree Illumination
Automatic On-At-Dusk
Flat or Conical Mount
Weatherproof
Durable UV resistant ABS
Wildlife deterrent spike
Installs easily in minutes
Includes rechargeable AAA, Ni-Cd battery
6 Preinstalled LED Colors! Change colors anytime
|
30.71 |
|
|
SR Series 20" Spot with Amber Pro Lens
RIGID’s Amber PRO Edition 20-inch SR-Series combines RIGID’s sleek low profile bar with RIGID’s rich Amber PRO colored lens.
Good visibility is necessary when out on the trail, over landing, or racing! RIGID's Amber PRO Edition was developed specifically for high dust, smoke, and other low-visibility conditions. The amber lighting provides superior performance in adverse lighting conditions thanks to the unique attributes of the human eye that make it easier to process light in longer wavelengths. This reduces glare, enhances definition, and improves contrast, allowing you to see farther than traditional white lighting.
Protected by an aluminum housing, features a blacked-out circuit board, prominent RIGID branding, and a limited lifetime warranty, the SR-Series offers superior build quality with a refined look. RIGID's Amber Pro Edition makes it easier than ever to Own The Night.
Features:
Amber PRO Lens
9-36 VDC Operation
Alloy Housing and Heatsink
Reverse Polarity Protection
Over/Under Voltage Protection
IP68 Compliant - Dust/Water Ingress
Pressure Equalizing Vent
Patented Optics
50,000 Hr+ LED Lifespan
Limited Lifetime Warranty
Off Road Use Only
Specifications:
Size (inch): 20"
Weight (Lbs): 4.90
Optics: Spot
Watts: 119
Amp Draw: 8.5
Raw Lumens: 13680
Lux at 10m: 720.1
Beam Distance at 1Lux: 268.4
Beam Distance at .25Lux: 536.7
Peak Beam Intensity(cd): 72013
Horizontal Beam Angle: 58.2
Product Comes With:
20-Inch SR-Series PRO Spot/Drive combo beam with Amber PRO lens
Harness and switch
Surface Mount Brackets
Hardware
*Sold as an individual
|
472.49 |
|