|
keywords: Bad Elf, Bad Elf GPS, Bad Elf GPS Pro
|
|
|
keywords: bad elf gps, bed elf, ipad gps, bad elf gps pro
|
|
|
BAD ELF GPS
Land. Sea. Air. GPS Everywhere Bad Elf strives to create high quality, dependable products consistent with Apple's philosophy of - It just works Just plug in your Bad Elf GPS and go play. No complicated setup. No batteries to charge. No hassles. The Bad Elf GPS is the best selling Apple approved external GPS accessory designed to directly connect to you iPad, iPod touch and iPhone. The Bad Elf accessory plugs into the dock connector and allows Apps to read your current location.
|
|
|
Gianneschi SGM45 Brush GM4 7X14 (Cp25/1)
|
44.85 |
|
|
Gianneschi SGM45A Brushes For CP25/1
|
38.21 |
|
|
Gianneschi CB 22-95 0.55KW Centrifugal Pump 230V 50/60Hz 1Ph
Gianneschi CB-22-95-230V, CB Series Centrifugal Pump and Motor unit, Bronze construction, Bronze impeller, 316 Stainless Steel Shaft. Motor is 0.37KW (0.5 Horsepower), 2900 RPM, 230 volts AC, Single Phase. Inlet Port is 1 Inch BSP Inlet, Discharge Port is 1 Inch BSP Outlet.
Applications for the CB2295230V include air conditioning systems, water supply, lifting fresh or salty water at sanitary plants, water circulations, increasing water pressure at water plants, pumping fresh water and seawater, and cooling and heating.
|
1416.18 |
|
|
Gianneschi CB 22-120 0.75KW Cent Pump 230V 50/60Hz 1Ph
Gianneschi CB-22-120-230V, CB Series Centrifugal Pump and Motor unit, Bronze construction, Bronze impeller, 316 Stainless Steel Shaft. Motor is 0.55 KW (0.75 Horsepower), 2900 RPM, 230 volts AC, Single Phase. Inlet Port is 1 Inch BSP Inlet, Discharge Port is 1 Inch BSP Outlet.
Applications for the CB 22-120-230V include air conditioning systems, water supply, lifting fresh or salty water at sanitary plants, water circulations, increasing water pressure at water plants, pumping fresh water and seawater, and cooling and heating. Before installation, ensure that mains supply is grounded in accordance with local legislation and corresponds to motor plate detail.
|
1694.69 |
|
|
Shurflo 94-800-22 Upper Assembly (4128-4138)
Shurflo 94-800-22 Upper Housing Assembly
Applications: 4128 Series Pumps
Includes 30PSI Demand Switch
Does Not Include Valve Assembly, Check Valve or Drive Assembly
|
67.65 |
|
|
SIMER RP4940-22 PUMP HEAD KIT
|
81.90 |
|
|
Walbro FRB-22-2 12V Fuel Pump 8-11Psi
Voltage: 12V DC
Weight: 1.83 lb
Inlet Filter Screen: 70 Micron
Magnetic Trap: Yes
Minimum Flow Rate: 43 gph
Dry Lift: 48"
Current Draw: 2.3 Amp
Inlet/Outlet: 1/4-18 NPSF
Fuse: 5A
Service Life: 18,000+ hr
Outlet Check Valve: None
Pressure: 8.0 - 11.0 psi
|
256.31 |
|
|
Gianneschi CB 22-10 120V 60HZ 1PH .55Kw Centrifugal Pump
Main pump features:
High performance with limited power needed
Open or close impeller available
Threaded/Flanged connection
Wide range
Applications:
F.W./S.W. Circulation
S.W feeding
WPS - Hydrofore
Port Size: From 1/2'' to 1'' 1/2 BSP - from DN32 to DN65
Pump casing: Bronze
Impeller / Gear: Bronze
Shaft: Stainless steel
|
1441.51 |
|
|
Gianneschi CB 22-110 0.55KW Cent Pump 230V 50/60Hz 1Ph
Main pump features:
High performance with limited power needed
Open or close impeller available
Threaded/Flanged connection
Wide range
Applications:
F.W./S.W. Circulation
S.W feeding
WPS - Hydrofore
Port Size: From 1/2'' to 1'' 1/2 BSP - from DN32 to DN65
Pump casing: Bronze
Impeller / Gear: Bronze
Shaft: Stainless steel
|
1848.19 |
|
|
Gianneschi CB 22-120 1.1KW Cent Pump 230V 50/60Hz 1Ph
Main pump features:
High performance with limited power needed
Open or close impeller available
Threaded/Flanged connection
Wide range
Applications:
F.W./S.W. Circulation
S.W feeding
WPS - Hydrofore
Port Size: From 1/2'' to 1'' 1/2 BSP - from DN32 to DN65
Pump casing: Bronze
Impeller / Gear: Bronze
Shaft: Stainless steel
|
1961.88 |
|
|
Black Friday started today 11-21-2014
Specials on both of our Extend Your Steps, Raymarine, Lowrance, Standard Horizon, Gerber, Milennia, Onyx, SPOT, Thetford, Humminbird, Magma, Bad Elf, PENN, FLIR, CLC and BOSS products. Why wait until Black Friday when you can get the deals now!
Sale is valid November 21st through December 5th, 2014. Closeout items are valid while supplies last.
|
|
|
Oberdorfer 300B Series Self Priming Centrifugal Pump
FEATURES
Pump Body:
Bronze
Ports:
1" NPT
Flow:
22 GPM Max
Pressure:
15 PSI Max, 35 feet of head
Impeller:
Centrifugal
Shaft Seal:
Mechanical Buna Seal Standard, Viton or Teflon Optional
Shaft:
Stainless Steel Standard, Monel Optional
Motor / Drive:
Attaches to NEMA C flange jet pump motors with threaded shaft of stainless steel or monel. We can supply additional motors and assemble if required.
APPLICATIONS / CHARACTERISTICS
This close coupled style bronze self-priming centrifugal pump is equipped with high quality ball bearings permanently filled with grease for maintenance free operation. The main shaft seal is a mechanical face type seal of proven reliability. Unlike positive displacement pumps centrifugal pumps have larger internal clearances as the pressure is generated by centrifugal force and high liquid velocity. These pumps can handle impurities in the liquid and the flow in the discharge line may be throttled or shut off without the need for a relief valve.
FEATURES
Self-Priming to 20 Feet Suction Lift
Rugged Bronze Construction
Ideal for marine service (air conditioning, bilge, and sea water recirculating).
O-Ring Housing seal eliminates gasket problems
Auxiliary Connections - for convenient priming and draining
Multiple Mechanical Shaft Seal Options -for various applications
Pump Heads mount to Standard Footed Nema 56J Jet Pump Motors
Shafts : 416 Stainless, Nickel Alloy, or 316 Passivated Stainless
Multiple motor options including Explosion Proof
For Pedestal Style, see 30PB
Optional Lifting Handle
DRIVE
Centrifugal pumps are designed for single rotation and are non reversible. Standard rotation is counter clockwise looking at the pump inlet port (clockwise facing pump shaft). Close coupled centrifugal pumps may be driven by a variety of power sources such as electric motors, hydraulic motors or air motors. Self priming centrifugal pumps must be operated in the horizontal position.
LIQUIDS & TEMPERATURES
Capacity - Water 60o F - Gallons Per Minute
Maximum lift without foot valve is 10 feet.
Bronze pumps are suitable for most common liquids in the pH range from 4-11. If in doubt consult with factory or check the Oberdorfer™ Chemical Resistance Guide booklet. The temperature limit for bronze pumps is 212F. Higher temperatures are possible with fluoroelastomer or Polytetrafluoroethylene (PTFE) seals. Centrifugal pumps are not well suited for pumping viscous liquids. Viscosities up to 2000 SSu may be handled resulting in reduced performance and efficiency.
Pump seal is mechanical carbon face type mated to ceramic wear face for maximum durability. Other seal components are made of Nitrile with low swell characteristics for compatibility with a wide range of liquids including many chemicals and solvents.
SUCTION LIFT
Up to 22 gallons per minute water flow and suction lift of 15 feet without a foot or check valve (25 foot suction lift using a foot or check valve and a filled inlet line). A 1/2” pipe plug on the tank top is for initial filling of priming chamber and inlet line--pump priming is automatic thereafter.
300B is Oberdorfers - Self Priming Centrifugal Pump Head Only Bronze
|
1139.40 |
|