|
|
141.96 |
|
|
Lutz Pump 0110-204 MslPP41Hc27
|
530.63 |
|
|
Gianneschi SGM45 Brush GM4 7X14 (Cp25/1)
|
44.85 |
|
|
Gianneschi SGM45A Brushes For CP25/1
|
38.21 |
|
|
Working closely with all the major electronics manufacturers, Seaview offers an innovative range of high quality products for power and sailboats, pleasure and commercial. Seaview added a hardcoat anodizing process before powder coating to insure superior durability and corrosion protection. Seaview is dedicated to providing quality products with the highest level of service in the industry.
Powder Coated White Cable Glands - In Stock Now!
The Seaview Cable Glands / Cable Clams provide waterproof cable routing made of UV stable Glass Filled (GF) ABS plastic, 316 stainless steel or black powder coated 316 stainless steel. Seaview cable gland options for 17mm to 334mm (0.67” to 1.38”) connectors, making it ideal for almost every installation.
Specials Closeouts Remanufactured Rebates
|
|
|
Buy a new qualifying Seaview product now until June 15th, 2020, and receive savings up to $25. Qualifying products include Modular Mounts, Mast Mounts, Camera Mounts, Sail Pods, Deck Pods, Cable Glands and additional accessories. Don't miss out!
*Offer valid now until June 15th, 2020
Specials Closeouts Remanufactured Rebates
|
|
|
Electrically Actuated Hinge 24V Fits Seaview Mounts Ending in M1 & M2
The Seaview SVEHB1 electrically actuated hinge will fit all Seaview mounts with 7"x7" and 10"x10" mounting base plates. Some electronics can also be mounted directly to the hinge plates when needed (contact Seaview to direct mount electronics). Professionally designed to raise and lower marine electronics with the push of a button. This single electrically actuated hinge will accommodate single small Seaview mounts up to large dual mounts fully loaded with marine electronics. This hinge is 5-9/16" tall x 13" wide x 20-1/2" long. This will hinge approximately 93 degrees leaving the hinge plate vertical off the mounting surface about 11-7/16".
This Seaview hinge is marine grade aluminum expertly fabricated for consistently superior welds. The actuator used is 24V however, 12V is an option with a conversion kit. The 24V actuator has a current draw of 10.4 amps on startup and when it is fully loaded with 2248 pound-force. The hinge has a very durable finish unlike anything else in the industry. This is first chem treated (for corrosion resistance), then an epoxy polyester primer coat is applied and finished with a polyester powder coat for a superior gloss white finish. There are two waterproof cable glands inside the hinge for water proof cable routing. This also has a removable lid to conveniently service the inside of the hinge if needed.
This actuated hinge has been used for many applications. Some examples, but not limited to are: Princess 66, Navetta 48, Sunseeker 52 & 66, Absolute 58, Sabre 45, Jupiter 27 and HCB Yacht 65CC.
Features:
Electrically Actuated Hinge
Volt: 24V
Fits Seaview Mounts ending M1 and M2
|
4752.00 |
|
|
Seaview
SEAVIEW by PYI is the market leader in designing and building mounting solutions for marine electronics. Working closely with all the major electronics manufacturers, we offer an innovative range of high quality products for power and sailboats; pleasure and commercial.
|
|
|
Starlink Maritime Top Plate for Seaview M1 & M2 Style Modular Mounts
Seaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics.
Features:
Starlink Wedge Base hole pattern pre-dimpled in this modular top plate
Water-tight gasket in the center of the plate to pass the Starlink cable
The 1” thick starboard plate can accommodate a Seaview light bar
|
168.00 |
|
|
1-1/4" Light Bar for Closed Dome Radar - Requires LTB Top
Seaview light bars are made from aluminum and powder coated brilliant white and are compatible with Seaview Modular Mounts (polished S.S. light bars also available). These light bars are 1.25" in diameter. Different styles of light are available as well as numerous accessories for your light bar. Accessories such as LED anchor lights, GPS adapters, wind transducer adapters, etc. What's also unique with Seaview light bars is that many can fold over 90° to allow for extra height clearance.
Many Styles
There are many different styles of Seaview light bars so you can be sure to get one that will work with your specific application. Styles for closed dome radars, satellite domes, open array radars and cameras/search lights.
Extra Height Clearance
On select Seaview light bar models some can fold over 90° to allow for extra height clearance. Simply loosen the four bolts around the stainless steel clamp and fold over in either direction.
Easy Installation
Secured with a stainless steel clamp, simply use the supplied four bolts
|
129.60 |
|
|
Starlink Maritime Top Plate for Seaview M1 Style Modular Mounts
Seaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics.
Features:
Water-tight gasket in the center of the plate to pass the Starlink cable
Predrilled and all hardware needed to mount the Starlink is included
*Not light bar compatible
|
163.20 |
|
|
1-1/4" Light Bar for Closed Domes Requires LTB Top - Black
Seaview light bars are made from aluminum and powder coated brilliant white and are compatible with Seaview Modular Mounts. These light bars are 1.25" in diameter. Different styles of light are available as well as numerous accessories for your light bar. Accessories such as LED anchor lights, GPS adapters, wind transducer adapters and etc. What's also unique with Seaview light bars is that they can fold over 90° to allow for extra height clearance.
Many Styles
There are many different styles of Seaview light bars so you can be sure to get one that will work with your specific application. Styles for closed dome radars, satellite domes, open array radars and cameras/search lights.
Extra Height Clearance
On select Seaview light bar models some can fold over 90° to allow for extra height clearance. Simply loosen the four bolts around the stainless steel clamp and fold over in either direction. Only LTB-R, LTB-S and LTB-S24 can fold over.
Easy Installation
Secured with a stainless steel clamp, simply use the supplied four bolts. This does not apply to the LTB-SF, LTB-OA and LTB-OA-6 light bars.
|
129.60 |
|
|
1-1/4" Light Bar for 18" or Smaller Satdomes - Requires LTB Top
Seaview light bars are made from aluminum and powder coated brilliant white and are compatible with Seaview Modular Mounts (polished S.S. light bars also available). These light bars are 1.25" in diameter. Different styles of light are available as well as numerous accessories for your light bar. Accessories such as LED anchor lights, GPS adapters, wind transducer adapters, etc. What's also unique with Seaview light bars is that many can fold over 90° to allow for extra height clearance.
Many Styles
There are many different styles of Seaview light bars so you can be sure to get one that will work with your specific application. Styles for closed dome radars, satellite domes, open array radars and cameras/search lights.
Extra Height Clearance
On select Seaview light bar models some can fold over 90° to allow for extra height clearance. Simply loosen the four bolts around the stainless steel clamp and fold over in either direction.
Easy Installation
Secured with a stainless steel clamp, simply use the supplied four bolts
|
220.80 |
|
|
1-14" Light Bar for 24" Satdomes - Requires LTB Top
Seaview light bars are made from aluminum and powder coated brilliant white and are compatible with Seaview Modular Mounts (polished S.S. light bars also available). These light bars are 1.25" in diameter. Different styles of light are available as well as numerous accessories for your light bar. Accessories such as LED anchor lights, GPS adapters, wind transducer adapters, etc. What's also unique with Seaview light bars is that many can fold over 90° to allow for extra height clearance.
Many Styles
There are many different styles of Seaview light bars so you can be sure to get one that will work with your specific application. Styles for closed dome radars, satellite domes, open array radars and cameras/search lights.
Extra Height Clearance
On select Seaview light bar models some can fold over 90° to allow for extra height clearance. Simply loosen the four bolts around the stainless steel clamp and fold over in either direction.
Easy Installation
Secured with a stainless steel clamp, simply use the supplied four bolts
|
264.00 |
|
|
8' Radar Mast Pole Kit with 2 Strut Kits
Seaview offers a 8' tall Pole Kit for just about any application. This Seaview Pole Kit is equipped with a adjustable base that has a small 5-1/4" x 3" footprint and a water tight Cable Seal, which can be easily disassembled for pole removal.
Features:
Fixed Top Plate - A Seaview Top Plate is included with each pole kit to fit closed dome radars. No longer the unwanted “swiss cheese” look with a Seaview modular top plate. These plates result in only 4 visible mounting screws to secure electronics. A anodized 1/4" thick aluminum plate is pre-drilled to fit most marine electronics. This aluminum plate is then encased in a UV stable glass filled ABS white plastic. Each top plate is dimpled to match the provided drill templates for easy and precise drilling for your specific marine electronic.
Supports - There are several strut supports depending on which Seaview Pole Kit you choose. A rail stand-off kit and a 48" long strut.
48" Struts - Also made from high polished stainless steel are the 48" long struts.
Adjustable Base - A hard anodized adjustable base with a water tight Cable Seal. The adjustable base measures 5-1/4" x 3".
**NON STOCK ITEM DROP SHIPS FROM MANUF. NO PROMO FREIGHT RATES***
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1809.60 |
|