Gianneschi SGM45 Brush GM4 7X14 (Cp25/1)

Gianneschi SGM45A Brushes For CP25/1

ScanPod DeckPod for Displays Up To 15" The ScanPod range offers maximum choice and versatility for installing all leading brands of instruments and screens. Designed for all leading brands and models of displays. Our Deck Pod allows you to install your MFD virtually on any flat surface on board. This allows you to have your display in the prime position while out sailing on your powerboat or RIB. With the pull of a lever, the intuitive design gives you a 360-degree viewing angle to make the most of what your display has to offer. Features: Swivel & Tilt Base - One-handed quick-release action. simply release the lever, swivel, and tilt to suit your requirements before locking back into position. Best Viewing Angle - An adjustable ball joint allows a range of movement and multiple mounting angles. Added Strength - Inner bracing plate secures the deck pod base to the pod and gives increased rigidity to the assembly eliminating potential damage from shock and vibration. Overhead Mounting - Deck Pod models can be overhead mounted. refer to our fit my device tab on our website. Hassle-Free Install & Service - Fixings fit from back to front cutting their threads into injection molded abs inserts designed into the Pod front. this design allows for a quick and safe install and repeats servicing. Increased Protection - Deck Pod seal is manufactured from a high tear strength silicone, it has a very high resistance to heat and UV so you can have confidence that it won’t deteriorate over time. Supplied Uncut - As standard, you will receive your Scanpod. for a small charge factory cutting service is available.

Scanpod Helm Pod 4 Instrument Uncut - Usable Face 4.3" x 19.7" - White Specifications: 4 Instrument Color: White Depth: 3.2" Usable Face: 4.3H" x 19.75W" Scanpod Range The exciting range of instrument pods takes a fresh look at the challenge of installing chartplotters, radar displays, instruments and autopilot control onto yachts and powerboats Features: Simplified range - easy product selection Manufactured from acrylic caped ABS plastic - tough, durable and UV stable Tamper proof stainless fastenings - secure install without self-tapping into plastic Innovative watertight seal system - full instrument protection supplied uncut to fit any display

Scanpod Helm Pod System - White With great new design features, the Scanstrut Helm Pod is a perfect choice for all cockpit configurations. With options to fit radar displays, chartplotters and standard navigation instruments. Usable face : 21w x 11h  Range of Models Helm Pod – System Pod for 8" screen + 4 standard nav instruments; or 12" screen + 2 standard nav instruments Universal Helm Fixing Fits pedestal rails from 25mm to 33.7mm (0.98" - 1.33"). Using a unique clamping system, the Pod can fit rail widths from 178mm (7") upwards. Secure & Watertight Install Saddle system supports the stainless tubing enabling a secure and rigid fit onto any pedestal and also ensures a watertight seal at cable entry No Drill Fixing Kit Customised U-bolts fit around rail and through the saddles into the back of the pod eliminating the need for time consuming and awkward drilling of the stainless rail. Hassle Free Install & Service Fixings fit from back to front cutting their threads into injection moulded ABS inserts designed into the Pod front. This design allows for a quick and safe install and repeat servicing. Increased Protection Pod seal is manufactured from a high tear strength silicone, it has a very high resistance to heat and UV so you can have confidence that it won't deteriorate over time. Supplied Uncut As standard you will receive your Scanpod uncut. For larger orders, a factory cutting service is available.

Scanpod Slim Helm Pod - Up to 8" Display The Scanstrut Helm Pod is a perfect choice for all cockpit configurations. Usable face -11.4W x 7.5H Features:   Universal Helm Fixing  Fits pedestal rails from 25mm to 33.7mm (0.98" -1.33"). Using a unique clamping system, the Pod can fit rail widths from 178mm (7") upwards. Secure & Watertight Install Saddle system supports the stainless tubing enabling a secure and rigid fit onto any pedestal and also ensures a watertight seal at cable entry No Drill Fixing Kit Customized U-bolts fit around rail and through the saddles into the back of the pod eliminating the need for time consuming and awkward drilling of the stainless rail. Hassle Free Install & Service  Fixings fit from back to front cutting their threads into injection moulded ABS inserts designed into the Pod front. This design allows for a quick and safe install and repeat servicing. Increased Protection  Pod seal is manufactured from a high tear strength silicone, it has a very high resistance to heat and UV so you can have confidence that it won't deteriorate over time. Supplied Uncut As standard you will receive your Scanpod uncut.

Scanpod Slim Deck Pod - Up to 7" Display Solve the challenge of finding a level mounting surface to install your displays onto your powerboat, RIB or sailboat wheelhouse. Features: Fits up to 7” displays Usable face 9.4W x 6.25H Swivel & Tilt Base One handed quick release action. Simply release the lever, swivel and tilt to suit your requirements before locking back into position Best viewing angle An adjustable ball joint allows range of movement and multiple mounting angles Added Strength Inner bracing plate secures the Deck Pod base to the pod and gives increased rigidity to the assembly eliminating potential damaged from shock and vibration Overhead mounting Deck Pod models can be overhead mounted. Hassle Free Install & Service  Fixings fit from back to front cutting their threads into injection moulded ABS inserts designed into the Pod front. This design allows for a quick and safe install and repeat servicing. Increased Protection  Pod seal is manufactured from a high tear strength silicone, it has a very high resistance to heat and UV so you can have confidence that it wont deteriorate over time. Supplied Uncut As standard you will receive your Scanpod uncut

Scanpod Slim Deck Pod - Up to 8" Display Solve the challenge of finding a level mounting surface to install your displays onto your powerboat, RIB or sailboat wheelhouse. Features: Fits up to 8” displays Usable face 11.4W x 7.5H Swivel & Tilt Base One handed quick release action. Simply release the lever, swivel and tilt to suit your requirements before locking back into position Best viewing angle An adjustable ball joint allows range of movement and multiple mounting angles Added Strength Inner bracing plate secures the Deck Pod base to the pod and gives increased rigidity to the assembly eliminating potential damaged from shock and vibration Overhead mounting Deck Pod models can be overhead mounted. Hassle Free Install & Service  Fixings fit from back to front cutting their threads into injection moulded ABS inserts designed into the Pod front. This design allows for a quick and safe install and repeat servicing. Increased Protection  Pod seal is manufactured from a high tear strength silicone, it has a very high resistance to heat and UV so you can have confidence that it wont deteriorate over time. Supplied Uncut As standard you will receive your Scanpod uncut

Scanpod Slim Deck Pod - f/10" to 12" Display - White Solve the challenge of finding a level mounting surface to install your displays onto your powerboat, RIB or sailboat wheelhouse. Features: Fits 10” to 12” displays Usable face 14W x 9.6H Swivel & Tilt Base One handed quick release action. Simply release the lever, swivel and tilt to suit your requirements before locking back into position Best viewing angle An adjustable ball joint allows range of movement and multiple mounting angles Added Strength Inner bracing plate secures the Deck Pod base to the pod and gives increased rigidity to the assembly eliminating potential damaged from shock and vibration Overhead mounting Deck Pod models can be overhead mounted. Hassle Free Install & Service  Fixings fit from back to front cutting their threads into injection moulded ABS inserts designed into the Pod front. This design allows for a quick and safe install and repeat servicing. Increased Protection  Pod seal is manufactured from a high tear strength silicone, it has a very high resistance to heat and UV so you can have confidence that it wont deteriorate over time. Supplied Uncut As standard you will receive your Scanpod uncut

Scanpod Mast Mount - 3 Instruments Scanstrut Scanpod Mast Pods allow installation of instruments at the mast. Whether racing or cruising, Mast Pods give you the best view of your instruments. Features: Universal Mount-designed to fit multiple mast sizes Mast arms pivot about semicircular washers, an additional cross-brace provides stiffness preventing sideways movement The pod seal is manufactured from a high strength silicone, it has a very high resistance to heat and UV so you can be sure it will stand the test of time Specifications: Uncut Useable Face: 14.5H" x 4.65W" Overall Dimensions: 17.0"W x 7.1H" Mast Arm: Length: 7.3", Width on lower end 8.3", Max opening 8.1" Fits mast sizes from 3" to 8.8"

Scanpod Helm Pod 3 Instrument Uncut - White With great features, the Helm Pod is a perfect choice for all cockpit configurations. With options to fit radar displays, chartplotters and standard navigation instruments, the Helm Pod is the right choice for you. For Displays & Standard Instruments: 3 x standard navigation instruments & autopilots Usable face 15.35H x 5.5W Features: Universal Helm Fixing - Fits pedestal rails from 25mm to 33.7mm (0.98" - 1.33"). Using a unique clamping system, the Pod can fit rail widths from 178mm (7") upwards. Secure & Watertight Install - Saddle system supports the stainless tubing enabling a secure and rigid fit onto any pedestal and also ensures a watertight seal at cable entry No Drill Fixing Kit - Customised U-bolts fit around rail and through the saddles into the back of the pod eliminating the need for time consuming and awkward drilling of the stainless rail. Hassle Free Install & Service - Fixings fit from back to front cutting their threads into injection moulded ABS inserts designed into the Pod front. This design allows for a quick and safe install and repeat servicing. Increased Protection - Pod seal is manufactured from a high tear strength silicone, it has a very high resistance to heat and UV so you can have confidence that it won't deteriorate over time. Supplied Uncut - As standard you will receive your Scanpod uncut. For larger orders, a factory cutting service is available.

Scanpod 7" Helm Pod Rail Mount Features: Applications: Designed for (1) 7" Instrument Current sailboat designs often have very open cockpits with few options for installing retro-fit instruments The Rail Pod gives you an option for fitting smaller displays and instruments directly onto a rail, in a position which suits you Rail Mounted Universal Fixing Fits pedestal rails from 25mm to 33.7mm (0.98" - 1.33") Fit your display onto standard and curved rails Great Viewing Options Viewing angle can be set upon installation Cables are routed internally through the clamp and onto the rail Increased Protection Pod seal is manufactured from a high tear strength silicone, it has a very high resistance to heat and UV so you can have confidence that it won't deteriorate over time Supplied Uncut - As standard you will receive your Scanpod uncut

Scanpod Deck Pod Uncut for 10" to 12" Displays Solve the challenge of finding a level mounting surface to install your displays onto your powerboat, RIB or sailboat wheelhouse. For Displays and Standard Instruments: Fits 10" to 12" Displays Usable face 14.7H x 9.7W Accomodates 3/4 Standard instruments (e.g. ST60) Features: SWIVEL & TILT BASE One handed quick release action. Simply release the lever, swivel and tilt to suit your requirements before locking back into position. BEST VIEWING ANGLE An adjustable ball joint allows range of movement and multiple mounting angles. ADDED STRENGTH Inner bracing plate secures the Deck Pod base to the pod and gives increased rigidity to the assembly eliminating potential damaged from shock and vibration. OVERHEAD MOUNTING Deck Pod models can be overhead mounted. Refer to part number guide for compatibility. HASSLE FREE INSTALL & SERVICE Fixings fit from back to front cutting their threads into injection moulded ABS inserts designed into the Pod front. This design allows for a quick and safe install and repeat servicing. INCREASED PROTECTION Pod seal is manufactured from a high tear strength silicone, it has a very high resistance to heat and UV so you can have confidence that it won’t deteriorate over time. SUPPLIED UNCUT As standard you will receive your Scanpod uncut (for tips on cutting, please view the FAQ tab). For larger orders, a factory cutting service is available.

Scanpod Helm Pod Uncut for 10" to 12" Displays With great design features, the Scanstrut Helm Pod is a perfect choice for all cockpit configurations. With options to fit radar displays, chartplotters and standard navigation instruments, the choice is yours! For Displays & Standard Instruments: Fits 10" to 12" displays Can accommodate 3 or 4 standard instruments (e.g. ST60) Usable face 14.7H x 9.7W   Features: UNIVERSAL HELM FIXING Fits pedestal rails from 25mm to 33.7mm (0.98″ – 1.33″) diameter. Using a unique clamping system, the Deep Pod's can fit rail widths from 178mm (7”) upwards.* SECURE & WATERTIGHT INSTALL Saddle system supports the stainless tubing enabling a secure and rigid fit onto any pedestal and also ensures a watertight seal at cable entry. NO DRILL FIXING KIT Customised U-bolts fit around rail and through the saddles into the back of the pod eliminating the need for time consuming and awkward drilling of the stainless rail. HASSLE FREE INSTALL & SERVICE Fixings fit from back to front cutting their threads into injection moulded ABS inserts designed into the Pod front. This design allows for a quick and safe install and repeat servicing. INCREASED PROTECTION Pod seal is manufactured from a high tear strength silicone, it has a very high resistance to heat and UV so you can have confidence that it won’t deteriorate over time. SUPPLIED UNCUT As standard you will receive your Scanpod uncut. For larger orders, a factory cutting service is available.

Scanpod Deck Pod Uncut for 9" Displays Solve the challenge of finding a level mounting surface to install your displays onto your powerboat, RIB or sailboat wheelhouse. For Displays and Standard Instruments: Fits displays up to 9” Usable face 13.2H x 8.14W Accomodates 3/4 Standard instruments (e.g. ST60) Features: SWIVEL & TILT BASE One handed quick release action. Simply release the lever, swivel and tilt to suit your requirements before locking back into position. BEST VIEWING ANGLE An adjustable ball joint allows range of movement and multiple mounting angles. ADDED STRENGTH Inner bracing plate secures the Deck Pod base to the pod and gives increased rigidity to the assembly eliminating potential damaged from shock and vibration. OVERHEAD MOUNTING Deck Pod models can be overhead mounted. Refer to part number guide for compatibility. HASSLE FREE INSTALL & SERVICE Fixings fit from back to front cutting their threads into injection moulded ABS inserts designed into the Pod front. This design allows for a quick and safe install and repeat servicing. INCREASED PROTECTION Pod seal is manufactured from a high tear strength silicone, it has a very high resistance to heat and UV so you can have confidence that it won’t deteriorate over time. SUPPLIED UNCUT As standard you will receive your Scanpod uncut (for tips on cutting, please view the FAQ tab). For larger orders, a factory cutting service is available.