|
Quick Anchor-Rode Rope and Chain
20' of 10mm Chain, 200' of 5/8" Rope
Slim Splice Quick System Rope and chain
An anchor-rode is the connection system between anchor and the boat and its
sturdiness during mooring is undoubtedly essential.
The critical point of the rope and chain combination is the joint, or technically speaking, the splice.
In Quick's Slim Splice, the splice is much slimmer and more tapered, preventing the jamming which often occurs on the gypsy, during changeover from rope to chain.
Quick's Slim Splice consists of a calibrated chain and a top quality 3-strand polyester rope, to guarantee optimum strength and life.
|
585.28 |
|
|
Gianneschi SGM45 Brush GM4 7X14 (Cp25/1)
|
44.85 |
|
|
Gianneschi SGM45A Brushes For CP25/1
|
38.21 |
|
|
Jabsco 91791-1850 Snap Ring
|
6.02 |
|
|
Yamada 611179 Bolt 38 50 75
|
5.74 |
|
|
Yamada 771799 Diaphragm 40V
|
334.82 |
|
|
Quick May Promotion at CLR Marine
Offer valid May 1st - May 31st, 2016
Just in time for boating season, don't miss out with super savings on select Quick products now until May 31st, 2016. Quick promotional products include Chargers, Windlasses, Rodes, Anchors and Remotes.
Specials Rebates Close Outs Remanufactured
|
|
|
Easy, Quick & Hassle Free
The portable oil change bucket features the reliable, heavy-duty F3B-19 flexible impeller pump with an integrated flow reversing switch. The F3B-19 Oil Change Bucket from Johnson Pump provides your service shop with a dependable and long-lasting oil change solution.
Features:
5.5 gallons per minute
Flexible Impeller Pump Assembly
Easy, quick, no-mess, no-hassle, oil change package
Replaceable impeller - nonfixed
Automatic shut off
Complete, ready to use
Portable and convenient
High-temperature resistant dipstick tube
Heavy-duty extended 8' alligator clips easily clamp directly onto the battery
Sealed lid with easy-to-use pour spout for emptying used oil
Better Quality, Better Performance
The preferred OEM replacement for Sherwood 1500k impeller.
Made with the patented MC 97 rubber compound this impeller is designed
to provide maximum engine performance and adheres to strict tolerance
manufacturing with exact OEM dimensions.
• Proven longer impeller life
• Less material failure and swelling
• Best engine cooling impeller
• Stable pressure
• Exact dimensions
• Used by leading manufacturers
Specials Closeouts Remanufactured Rebates
|
|
|
Dometic Marine's Adler/Barbour series Quick-Connect Couplers are new. No more one time connection, you can un-couple and re-couple now without the loss of refrigerant.
Click on the below PDF's for more information.
Adler/Barbour_Quick_Connect_Couplers Adler/Barbour-Supplemental-Installation
|
|
|
Quick
Quick, nautical experts since 1983, design and manufacture instruments and accessories for the nautical recreational market. Quick is located in Ravenna on Italy's Adriatic coast. Quick is a worldwide leader with a wide range of accessories specifically conceived for the nautical sector. Products are distributed all over the world and installed by main boat builders. Main product lines include windlasses, capstans, water heaters and more.
|
|
|
Pro Mount Base Only
For years anglers have been demanding a strong, low profile, quick release bracket for holding their fishing electronics. Designed to handle today's most popular sonar units, GPS or portable radios. The ProMount Quick Release Bracket makes it possible to easily remove your electronics weighing up to three pounds from a permanently mounted base with one hand. The 360-degree swivel adjustment lets you see the unit from any angle. The Pro Mount will fit nearly all Lowrance, Garmin, Eagle, Hummingbird, Pin-Point and Vexilar electronics. The permanent base is available separately too, which makes it easy to place several bases around the boat or even in another boat. Several systems have been mounted in trucks to hold GPS units with great success.
The ProMount sells for much less than current brackets, but with more features and versatility. The sleek, low profile of the ProMount is only 1 1/8 inches high. The permanent base has no sharp edges to step-on or wear a hole in your boat cover. An optional installation hole cover spacer comes with every base to give you a well finished look to the mount when installed. Your electronics can also be mounted overhead and hang down on the secure locking rail system of the ProMount to increase the potential places you can mount electronics. The ProMount Quick Release Bracket comes with all stainless steel mounting hardware and the bracket is corrosion resistant. The ProMount is self-draining and easy to clean, so it even looks good when the electronics are not in your boat.
Features:
360-degree swivel adjustment
Sleek, low profile of the ProMount is only 1-1/8 inches high
Fits nearly all Lowrance, Garmin, Eagle, Hummingbird, and Vexilar electronics
Made of tough ABS plastic
Stainless steel mounting screws
One year warranty
Made in the USA
Specifications:
Outside Dimensions: 3.45" x 4.75"
Mounting Hole Spacing: 2.3" x 3.7"
Mounting Hole Size: 1/4"
Supports weights up to 3 pounds
One year warranty
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
13.20 |
|
|
Mirror Glaze® Quick Detailer - 1 Gallon *Case of 4*
Meguiar's Mirror Glaze® Quick Detailer is a one-step cleaner/wax, specially formulated for high-production paint reconditioning. It works to quickly and safely to remove oxidation and blemishes while restoring deep gloss and providing a durable wax finish.
Features:
One-step cleaner/wax, specially formulated for high production reconditioning
Quickly and safely removes oxidation and blemishes
Restores deep gloss and provides a durable wax finish
Formulated for use by Hand, DA Polisher, or Rotary Buffer
Larger 1 gallon size is more cost effective for body shops and professional detailers
|
144.06 |
|
|
Mirror Glaze™ Quick Detailer - 1 Gallon
Meguiar's Mirror Glaze® Quick Detailer is a one-step cleaner/wax, specially formulated for high-production paint reconditioning. It works to quickly and safely to remove oxidation and blemishes while restoring deep gloss and providing a durable wax finish.
Features:
One-step cleaner/wax, specially formulated for high production reconditioning
Quickly and safely removes oxidation and blemishes
Restores deep gloss and provides a durable wax finish
Formulated for use by Hand, DA Polisher, or Rotary Buffer
Larger 1 gallon size is more cost effective for body shops and professional detailers
|
37.02 |
|
|
Quick Reference Navigation Rules Card
A proven navigation tool used by the US Coast Guard, US Coast Guard Auxiliary, and US Power Squadron. Navigation Rules feature the US. Buoyage System, inland and international rules, right-of-way, lights, sound signals, and bridge signals.
Any boat owner or ship captain knows many navigation rules; keeping them straight can be a challenge. Used by the US Coast Guard, US Coast Guard Auxiliary, and US Power Squadron, the Davis Instruments Navigation Rules card is a handy way to look up what you need quickly.
This Navigation Rules Quick Reference Card includes the US Buoyage System, Inland, and International Rules, Right-of-Way, Lights, Sound Signals, and Bridge Signals. The card also has zones of approach, distress signals, how to recognize lights of different ships and passage signals at night, and what to do if you are in doubt of a rule under certain circumstances.
The information on the card is presented in a way that is legible and concise. Colors and shading help separate the different information sections, making it easy to find. The Navigation Rules Card is full color on both sides, and it is three-hole punched for a binder or bulkhead mounting. It’s also weatherproof and made from durable plastic, allowing it to withstand anything that comes your way. The Navigation Rules Quick Reference Card measures 8 1/2 x 11 inches (22 x 28 cm).
|
11.57 |
|
|
Tough-Claw™ Medium Clamp Mount with Quick Release Adapter
This Tough-Claw™ mount (RAP-B-404-326U) was designed in collaboration with OtterBox Hardline Series for industrial applications. This kit includes a B-size RAM® Tough-Claw™ clamp base, a medium-length socket arm, and a RAM® EZY-Mount™ Quick Release Adapter for OtterBox Hardline Series.
With the quick-release tab, simply push the tab to dismount the tablet without having to adjust the mount itself. The RAP-B-404U Tough-Claw™ is the medium version designed to quickly clamp to round, square, and odd-shaped rails and bars ranging from 1" to 1.6" in outer diameter and includes rubber pads to provide stable gripping and protection of the mounting surface.
Features:
The medium-size version of the Tough-Claw™ designed to quickly clamp to round, square, and odd-shaped rails and bars ranging from 1" to 1.6" in outer diameter; rubber pads provide stable gripping and protection of the mounting surface
includes a B-size medium-length socket arm and RAM® EZY-Mount™ Quick Release Adapter for OtterBox Hardline Series
Quick-release adapter with release tab for easy docking and removal of devices wrapped in an OtterBox Hardline Series case
Backed by a lifetime warranty
Specifications:
Hardware Included: Assembly hardware
Clamp Range (inch) 1” – 1.6” diameter
Socket to Socket Length (inch): 3”
Hole Pattern (inch): 2-Hole AMPS: 1.912”
Ball Size (inch): B size (1”)
Weight Capacity: The standard use is 2.0 lb. and the heavy-duty use is 1 lb.
Materials: High-strength composite
Weight: 1.02 lb.
|
53.90 |
|