Gianneschi SGM45 Brush GM4 7X14 (Cp25/1)

Gianneschi SGM45A Brushes For CP25/1

Mate USA M164-924-15 12/24V OIL CHANGE SYSTEM 3 Valves compact oil change electronic system for fixed boat installations. Conceived for oil fill and drain operations for all on-board uses like generators, engines, transmissions and catwalks. The electronic control adjusts the speed of the pump according to oil viscosity/temperature and increases its speed during priming. Automatically shuts off in case of empty tank, short circuit and after 30 minutes of operation. Indicated for a perfect cleaning of all on-board areas while avoiding leaks and dispersions on the boat floor. Easy to operate and carry. PART #: M164-924-15 VOLTS: 12/24 GPM: 2.6 AMPERE: 4A/2A PORTS: 1/2" NPT

Jabsco Sp2701-15 Outer Bearing Seal  

SHURflo 94-375-15, Pressure Switch Kit SHURflo Pressure Switch Kit Viton, 80-100 PSI

SHURflo 94-390-15, Valve Viton Nylon

STA-RITE C20-15 GASKET

STA-RITE C69-15 WATER SLINGER

NORTHERN LIGHTS 15-00610, LOCK WASHER

Mate USA M164-660-15 Water Pressure Systems 12 or 24 volts This Mate USA 2.6 GPM Self-priming automatic electric pumps with helical PTFE gears, integrated check valve and electronic control. Nickel-plated brass body and stainless steel shaft. Main applications: fresh water pressure systems and shower kits on boats, rubber dinghies, sailing boats and campers.   UP2/E 2.6 GPM Water Pressure System Volt: 12V & 24V Fuse:7.5A Gpm: 2.6 Psi: 29 Ports: 3/8"NPT Fresh water: Yes Salt water: Yes

Mate USA M164-700-15 Electronic Diesel and Oil Pump Helical Bronze Gears UP2/E-BR 2.6 GPM Electronic Diesel and Oil Pump Volt: 12V & 24V Gpm: 2.6 Psi: 29 Diesel: Yes Oil: Yes   This Mate USA 2.6 GPM Self-priming Automatic electric pump,12/24V, with constant pressure electronic control for the transfer of diesel and oil. Helical bronze gears, NBR check valve, body and connections in nickeled brass, stainless steel shaft. The pump is supplied with a “High-Speed” setting for Diesel transfer and it's set to interact with a SCS control panel allowing the switch to the “Low-Speed” mode for the transfer of oil and viscous liquids.

Mate USA M164-602-15 Water Pressure System with Helical PTFE Gears UP3/E GPM: 4.0 Volt: 12V & 24V Fuse: 15A Gpm: 4.0 Ports: 3/8" NPT Psi: 29 Fresh water: Yes Salt water: Yes   This Mate USA 4.0 GPM Self-priming automatic electric pump with helical PTFE gears, integrated check valve and electronic control. Nickel-plated brass body and stainless steel shaft. Main applications: fresh water pressure systems and shower kits on boats, rubber dinghies, sailing boats and campers.

Mate USA M164-801-15 12/24V ELECTRIC WASHDOWN PUMP DP3/E 43.5 Psi Washdown Pump Volt: 12V & 24V Gpm: 3.7 Psi: 43.5 Fresh water: Yes Salt water: Yes   The Mate USA DP3/E has 43.5 Psi and is a complete kit including an electronic self-priming electric pump with electronic control. Equipped with helical PTFE gears, in-line filter, nickel plated brass body and check valve. With 33ft  stretchable coil hose and jet gun, equipped with quick-click connection, stop-jet, check valve and trigger with jet regulation. The kit are particularly suitable for washing operations either with salt or fresh water.

Mate USA M164-095-15 12/24V Reversible Diesel/Oil Transfer Pump with Flow Regulation UP8-RE Volt: 12V & 24V Fuse: 4A/2A Gpm: 2.6 Ports: 3/8" NPT Psi: 51 Diesel: Yes Oil: Yes   Heavy duty Electronic Gear pump with Integrated Smart Keypad to reverse the flow direction and to manually fine tune the flow rate. The flow rate is also automatically adjusted according to the viscosity of the fluid to avoid cavitation. Best for oil and diesel transferring. Compact and Easy to operate and carry.

Mate USA M164-710-15 Electronic Diesel and Oil Pump with Helical Bronze Gears UP3/E-BR 4 GPM Electronic Diesel and Oil Pump Volt: 12V & 24V Gpm: 4 Psi: 36 Diesel: Yes Oil: Yes   This Mate USA 4 GPM Self-priming Automatic electric pump,12/24V, with constant pressure electronic control for the transfer of diesel and oil. Helical bronze gears, NBR check valve, body and connections in nickeled brass, stainless steel shaft. The pump is supplied with a “High-Speed” setting for Diesel transfer and it's set to interact with a SCS control panel allowing the switch to the “Low-Speed” mode for the transfer of oil and viscous liquids.