|
SHURflo 94-141-00, Filter Screen Kit
|
52.03 |
|
|
Onan Carburetor Repair Package 141-0747
|
108.46 |
|
|
Shurflo 4238-141-E07 Blaster Ii 3.5 24V
Diaphragm Pump 4 Chamber, Blaster II, 24VDC Intermittent Duty Sealed Motor, Up To 3.6GPM Open Flow, 45PSI Adjustable Demand Switch, 1/2" x 14 NPSM Male Threaded Ports, Includes Two 3/4" Hose Barb Straight Swivel Fittings a Male Garden Hose Fitting and a Pistol Grip Sprayer, 3.5 Amps, Ignition Protected, CE Rated, Fresh or Salt Water Washdown Pump
|
216.58 |
|
|
Gianneschi SGM45 Brush GM4 7X14 (Cp25/1)
|
44.85 |
|
|
Gianneschi SGM45A Brushes For CP25/1
|
38.21 |
|
|
Flojet D3135E1411A Mpu 12V E/E 3C N/Sw Bp70
Flojet- Diaphragm Pump Duplex II 12V, 3/8”FNPT Ports, 2.0GPM, Bypass 70psi, Polypropylene, EPDM Valves, EPDM Diaphragm
|
252.90 |
|
|
Flojet D3835H1411A Pump 115V 2.0/70 Pes N/Sw
Flojet- Diaphragm Pump Duplex II 115V, 3/8”FNPT Ports, 2.0GPM, Bypass 70psi, Polypropylene, EPDM Valves, Santoprene Diaphragm, 6' Power Cord
|
250.38 |
|
|
Oberdorfer S21416CB SS Pump W88 Grs Cbn Brg
CHEMSTEEL™ pumps are designed to handle common and highly corrosive liquids that must be pumped under pressure. Manufactured to extremely precise tolerance, the CHEMSTEEL™ pump line prevents system contamination while maintaining the purity and integrity of the liquid being pumped. Its rugged, three-section, O-ring sealed thru-bolt construction provides ease of servicing and parts replacement. Helical gearing offers noise reduction by as much as 10db, while the tandem pumps double the output flow for a single fluid, or with isolation, handle other fluids in direct ratio to the first Additionally, CHEMSTEEL™ pumps offer bi-directional operation for applications requiring reversing flow.
FEATURES
Gear/bearing design allows for “trimming” for optimizing the pump’s maximum flow to reach minimum turndown or to match flow to a specific OEM’s requirement.
Special materials combinations are available for specific liquids:
Stainless or Alloy C housing construction.
Gears available in 316 stainless,. W88 stainless and Alloy C. Also in Polytetrafluoroethylene, polyphenylenesulfide and polyetheretherketone.
Shafts are 316 stainless steel or Alloy C.
Bearings available in carbon or polytetrafluoroethylene.
Full range of seal options including lip seal, packing and mechanical designs.
DRIVE
The pump is driven directly from the electric motor shaft by means of a flexible coupling. A close-coupled adapter connects the pump to the motor.
LIQUIDS & TEMPERATURES
This pump is suitable to handle clear lubricating and non-lubricating fluids at temperatures to 450F. These pumps will handle viscous fluids to 100,000 cps (462,000 SSU) at reduced shaft speeds.
SUCTION LIFT
This pump has a suction lift capability of 20 feet for a new pump. Though gear pumps are self-priming, a foot valve is recommended. If possible, wet gears with the liquid to be pumped for the first dry start. Liquid retained in the system and gear chambers serves to wet the pump on subsequent starts.
|
3075.56 |
|
|
Oberdorfer S21416CC SS Pump W88 Grs Cbn Brg
CHEMSTEEL™ pumps are designed to handle common and highly corrosive liquids that must be pumped under pressure. Manufactured to extremely precise tolerance, the CHEMSTEEL™ pump line prevents system contamination while maintaining the purity and integrity of the liquid being pumped. Its rugged, three-section, O-ring sealed thru-bolt construction provides ease of servicing and parts replacement. Helical gearing offers noise reduction by as much as 10db, while the tandem pumps double the output flow for a single fluid, or with isolation, handle other fluids in direct ratio to the first Additionally, CHEMSTEEL™ pumps offer bi-directional operation for applications requiring reversing flow.
FEATURES
Gear/bearing design allows for “trimming” for optimizing the pump’s maximum flow to reach minimum turndown or to match flow to a specific OEM’s requirement.
Special materials combinations are available for specific liquids:
Stainless or Alloy C housing construction.
Gears available in 316 stainless,. W88 stainless and Alloy C. Also in Polytetrafluoroethylene, polyphenylenesulfide and polyetheretherketone.
Shafts are 316 stainless steel or Alloy C.
Bearings available in carbon or polytetrafluoroethylene.
Full range of seal options including lip seal, packing and mechanical designs.
DRIVE
The pump is driven directly from the electric motor shaft by means of a flexible coupling. A close-coupled adapter connects the pump to the motor.
LIQUIDS & TEMPERATURES
This pump is suitable to handle clear lubricating and non-lubricating fluids at temperatures to 450F. These pumps will handle viscous fluids to 100,000 cps (462,000 SSU) at reduced shaft speeds.
SUCTION LIFT
This pump has a suction lift capability of 20 feet for a new pump. Though gear pumps are self-priming, a foot valve is recommended. If possible, wet gears with the liquid to be pumped for the first dry start. Liquid retained in the system and gear chambers serves to wet the pump on subsequent starts.
|
3880.56 |
|
|
OBERDORFER S21416CZ SS PUMP W88 GRS CBN BRG
CHEMSTEEL™ pumps are designed to handle common and highly corrosive liquids that must be pumped under pressure. Manufactured to extremely precise tolerance, the CHEMSTEEL™ pump line prevents system contamination while maintaining the purity and integrity of the liquid being pumped. Its rugged, three-section, O-ring sealed thru-bolt construction provides ease of servicing and parts replacement. Helical gearing offers noise reduction by as much as 10db, while the tandem pumps double the output flow for a single fluid, or with isolation, handle other fluids in direct ratio to the first Additionally, CHEMSTEEL™ pumps offer bi-directional operation for applications requiring reversing flow.
FEATURES
Gear/bearing design allows for “trimming” for optimizing the pump’s maximum flow to reach minimum turndown or to match flow to a specific OEM’s requirement.
Special materials combinations are available for specific liquids:
Stainless or Alloy C housing construction.
Gears available in 316 stainless,. W88 stainless and Alloy C. Also in Polytetrafluoroethylene, polyphenylenesulfide and polyetheretherketone.
Shafts are 316 stainless steel or Alloy C.
Bearings available in carbon or polytetrafluoroethylene.
Full range of seal options including lip seal, packing and mechanical designs.
DRIVE
The pump is driven directly from the electric motor shaft by means of a flexible coupling. A close-coupled adapter connects the pump to the motor.
LIQUIDS & TEMPERATURES
This pump is suitable to handle clear lubricating and non-lubricating fluids at temperatures to 450F. These pumps will handle viscous fluids to 100,000 cps (462,000 SSU) at reduced shaft speeds.
SUCTION LIFT
This pump has a suction lift capability of 20 feet for a new pump. Though gear pumps are self-priming, a foot valve is recommended. If possible, wet gears with the liquid to be pumped for the first dry start. Liquid retained in the system and gear chambers serves to wet the pump on subsequent starts.
|
3186.88 |
|
|
Hypro EL1412 Elbow 1/4Mpt X 1/2Barb
|
0.95 |
|
|
Hypro EL114100 1 1/4 Mnpt X 1 Hb Elbow
|
4.08 |
|
|
Magellan Owners,
There is a nationwide problem with Magellan. Magellan has not been fulfilling their orders for support products. Our distributors, a few hundred other dealers and we have tried to get a commitment from Magellan as to when they will ship any of their support products. This ends up on deaf ears somewhere in their corporate office, as we never receive an answer from them. They make and sell plenty of GPS's but they are not producing the support products that our customers need. We ask that you contact the Magellan corporate office at Tel: +1 408 615-5100 to let them know how displeased you are with their lack of commitment to their customers.
The Lowrance iWay 350C has been discontinued and replaced with the Lowrance XOG.
Taking a new direction in precision, all-purpose navigation, the innovative new Lowrance XOG, cross-navigation, 12-channel GPS features ready-to-go street navigation and loads of optional outdoor maps. Check it out today!
|
|
|
141 Kayak/SUP Transducer Mounting Arm w/438 Gear-Head
Kayak/Sup Transducer Mounting Arm made of high strength composite material that will give you years of service - withoutany corrosion problems. Also included is the 415 Slip Discs that offer micro adjustments when needed. The Scotty Transducer mount telescopes from a compact 11.5" to 18" when fully extended and swivel 360°. Includes the ever popular Scotty the 141 Track Adapter Mount that will allow you to install one of the Scotty Fishfinder mounts.
WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
28.67 |
|
|
Micropump 80569 Kit For Mod 12A/14A/121/141
|
1296.00 |
|