|
SHURflo 94-139-00, Motor for 9300 Submersible Pump
|
350.06 |
|
|
Gianneschi SGM45 Brush GM4 7X14 (Cp25/1)
|
44.85 |
|
|
Gianneschi SGM45A Brushes For CP25/1
|
38.21 |
|
|
Lumitec
Today's rapid pace of LED development suggests that the way we think of lighting is about to change profoundly. These changes create new opportunities and new challenges. Lumitec is a company that was conceived and designed to overcome these challenges and leverage these opportunities. Lumitec was carefully crafted to offer boat builders the most usable, durable, attractive lights on the market.
|
|
|
Javelin 600X Underwater Light
Style and performance unite to create the all-new Javelin Underwater Light Series from Lumitec. Designed for high-performance boats the Javelin Underwater Light boasts a highly polished housing and a contemporary stylish rectangular design. Leveraging the same "smart light" technology found in our market-leading SeaBlazeX2 series - Javelin offers the same high performance, full-color RGBW output, simple surface mount installation, and ease of operation only found in Lumitec products. Ideal for freshwater boats of all sizes but durable enough for saltwater applications.
Contemporary design with a highly polished housing, rock-solid reliability, and unsurpassed performance of the market-leading SeaBlaze underwater light series, Javelin is the perfect combination of style and performance.
Javelin is designed with Thermal Cutback Technology to ensure the lights do not overheat and cause damage to the light. This means that if you occasionally run the lights while your boat is out of the water will not damage the light.
The beam pattern of the Javelin underwater light series has been carefully designed and optimized for optical efficiency, thus creating a low, broad flood beam pattern that maximizes coverage on the horizontal axis and minimizes waste on the vertical axis.
The Javelin underwater light is PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award-winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection, dimming, and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app.
Features:
Full-Color RGBW Spectrum Output
Plated Naval Bronze Housing
No External Controllers Required
Operate From a Standard Power Switch
Poco System Compatible
Technical Specifications:
Color output - RGBW Spectrum
Beam Pattern - Flood
Lumens - 6,000+
Voltage 10-30 V
Current draw - 5A@ 12 V
Dimensions (H x W x Depth) - 2" x 6" x 0.5"
*Sold as an Individual
|
527.96 |
|
|
MiniRail2 6" Light - Blue Non Dimming
Small. Attractive. Powerful. Made in the USA and priced right. What else could you ask for? Lumitec's MiniRail2 delivers. As with all Lumitec luminaires, the Rail2 is IP67 compliant, which means despite its great looks it is just at home on a spray-drenched hard top as a teak-adorned salon. Choose White, Red, or Blue output.
Specifications:
Voltage: 10 - 30V DC
12V DC Amps: 360mA
24V DC Amps: 200mA
Correlated Color Temperature: 5000
Color Rendering Index: 70+
Rated Watts: 6
Lumens (White): 145
Operating Temp (°F): -31 to + 131 F
Operating Temp (°C): -35 to +55 C
Width: 5.90" (14.97cm)
Height: 1.11" (2.82cm)
Depth: 0.60" (1.53cm)
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
36.23 |
|
|
CapriLT - LED Flood Light - White Finish - White Non-Dimming
Since 2008 Lumitec's Capri and Caprera family have established the benchmark for quality, performance, and value in LED flood replacements for 55W halogens. With more than 1,000 integrating sphere tested lumens, the CapriLT builds on that legacy and reaffirms market leadership.
Developed, designed, and manufactured entirely in Florida, USA, the CapriLT delivers exceptional reliability and class-leading performance. As with all Lumitec products, this light has been rigorously tested for shock and vibration, water ingress, impact, weatherability, electromagnetic radiation and susceptibility, and overall durability. In short, the CapriLT delivers exceptional value in extreme environment LED flood lights.
Specifications:
Voltage: 10-30V DC
12V DC Amps: 1.3A
2V DC Amps: 600mA
Correlated Color Temperature: 5000
Color Rendering Index: 70+
Rated Watts: 12
Lumens (White): 1000
Width: 4.94"
Height: 1.75"
Depth: 1.75"
IP67 Compliant
Certified Ignition Protected
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
91.54 |
|
|
Mini Rail2 – 6" LED Utility Light - Spectrum RGBW - Brushed Finish
Small, attractive, powerful and priced just right, what else could you ask for? Lumitec’s Mini Rail2 delivers. As with all Lumitec products, the Mini Rail2 is completely water sealed (IP67 compliant), which means that, despite its great looks, it is equally effective for use in exterior as well as interior applications. Available in four color options: warm white, neutral white, blue or red.
Specifications
Lumens (white): 145
Voltage: 10-30V DC
12V DC Amps: 360mA
24V DC Amps: 200mA
Rated Watts: 4
CCT: 5000
CRI: 70+
Op. Temp F/C: -31/35 to + 131/55
Timed Toggled Protocol (TTP): Yes
Third Party Dimmer Compatibility (3PD): Yes
Color Match Commitment (CM): Yes
Mounting Hole Diameter: 5/32"
Height: 5.90 in. (14.97 cm)
Width: 1.11 in. (2.82 cm)
Depth: 0.60 in. (1.53 cm)
|
94.43 |
|
|
Poco Digital Lighting Control 3.0
Poco Digital Lighting Control is a low-cost, easy-to-install, and set up onboard digital lighting control system that offers full dimming and color control over all your Lumitec PLI-enabled lights at the touch of a button via any compatible MFD or connected smart device. Poco 3.0 adds enhanced wireless security, an external API for compatibility with networked third-party automation systems, and a "Triggers" feature which allows for the triggering of Poco virtual switches by external inputs - all packaged within a responsive user interface for better mobile device usability.
Features:
PWR: Positive 10-30 VDC POCO supply power. Line must be fused prior to connecting to POCO with 3 Amp ATC blade fuse or equivalent (Constant ON or Switched with ACC Line)
GRND: Negative 10-30 VDC POCO supply power
ACC: Positive 10-30 VDC, Low current enable line to turn POCO on from remote device (i.e. MFD) (Must be powered to enable Poco)
1-4 IN: Channel Input power. Line must be fused prior to connecting to POCO with 10 Amp ATC blade fuse or equivalent (14 AWG 300V 16 inch long cable)
1-4 OUT: Channel Output power to the lighting circuit. Maximum 10 Amp load per channel. The maximum total load across all channels is limited to 40 Amps. Load on the channel must be only one of the following (Lumitec PLI enabled lighting/lighting capable of dimming (through PWM) / device requiring a standard ON-OFF circuit) (14 AWG 300V 16 inch long cable)
LAN: Local Area Network connection. 10/100 Base T data connection to POCO. Standard CAT-5 cable with RJ45 connector required to plug into sealed network cable adapter. (18 inch long cable with Link light)
POWER: Indicator - Illuminates Green if POCO is powered on, both PWR and ACC lines must have supply voltage between 10 and 30 VDC
CH1-4: Indicator - Illuminates Red if power is supplied to Channel from fuse/breaker panel: - Illuminates Green if power is supplied to Channel input and the channel is turned on inside of POCO controller; PLI enabled lights may be OFF: - Flashes Orange if PLI data is transmitted: - Illuminates Orange if the channel is dimmed through a PWM signal.
STATUS: Green blinking light indicates WiFi connection status: - 0 blinks: WiFi disabled - 1 blink: WiFi-enabled but not connected to any peers - 2 blinks: WiFi is connected to one or more peers Blue blinking light indicates Bluetooth-LE connection status: - 0 blinks: Bluetooth-LE is disabled - 1 blink: Bluetooth-LE enabled but not connected - 2 blinks: Bluetooth-LE is connected
|
277.64 |
|
|
SeablazeX2 Spectrum Underwater Light RGBW Polished Housing
As competitors have struggled to catch up to the performance and value of our phenomenally successful SeaBlazeX, Lumitec has pushed ever farther ahead. Introducing SeaBlazeX2. SeaBlazeX2 delivers the exceptional performance, quality, and value of the industry-leading SeaBlazeX, with 60% greater output. SeaBlazeX2 delivers more than 6,000 integrating-sphere-measured lumens, surface mount, no external drivers, and a pedigree of reliability recognized the world over. The bar has once again been raised.
Features:
Full-color spectrum with color cycle mode
Completely water sealed and IP68 compliant
Easy Installation: Surface mount with small 1/2" through-hull hole and simple 3-wire hook up
No external controller boxes required
Constructed of marine grade bronze and heat-tempered glass
Over 2,000+ hours of rigorous ASTMB-117 Salt Spray Chamber testing
Proudly designed and manufactured in the USA
3-year warranty on all Lumitec products
Specifications:
Lumens (White): 6000
Voltage: 10-30vDC
12v DC Amps: 5A
24v DC Amps: 2.5A
Rated Watts: 60
CCT: 6500
CRI: 70+
Op. Temp F/C: -31/35 to + 131/55
Timed Toggled Protocol (TTP): Yes
Third Party Dimmer Compatibility (3PD): No
Color Match Commitment (CM): No
Finish/Housing: Polished
Depth: 0.85 in (2.15 cm)
Diameter: 3.94 in (8.86 cm)
|
527.96 |
|
|
SeablazeX2 Underwater Light Dual Color White Blue Polished Housing
As competitors have struggled to catch up to the performance and value of our phenomenally successful SeaBlazeX, Lumitec has pushed ever farther ahead. Introducing SeaBlazeX2. SeaBlazeX2 delivers the exceptional performance, quality, and value of the industry-leading SeaBlazeX, with 60% greater output. SeaBlazeX2 delivers more than 6,000 integrating-sphere-measured lumens, surface mount, no external drivers, and a pedigree of reliability recognized the world over. The bar has once again been raised.
Features:
Completely water sealed and IP68 compliant
Easy Installation: Surface mount with small 1/2" through-hull hole and simple 3-wire hook up
No external controller boxes required
Constructed of marine grade bronze and heat-tempered glass
Over 2,000+ hours of rigorous ASTMB-117 Salt Spray Chamber testing
Proudly designed and manufactured in the USA
3-year warranty on all Lumitec products
Specifications:
Lumens (White): 6000
Voltage: 10-30vDC
12v DC Amps: 5A
24v DC Amps: 2.5A
Rated Watts: 60
CCT: 6500
CRI: 70+
Op. Temp F/C: -31/35 to + 131/55
Timed Toggled Protocol (TTP): Yes
Third Party Dimmer Compatibility (3PD): No
Color Match Commitment (CM): No
Finish/Housing: Polished
Depth: 0.85 in (2.15 cm)
Diameter: 3.94 in (8.86 cm)
|
355.66 |
|
|
Contour Series Navigation/Docking Combination Light - Port Red
Innovation – plain and simple. Lumitec’s engineers have combined a bright, sharp 1,000-lumen dock light with a U.S. Coast Guard-approved 2nm navigation light. Easy to install, great looking, and all the reliability you’ve come to expect from Lumitec.
Specifications:
Output: Port Red
Visibility: USCG2NM
Flood Lumens: 1000
Voltage: 10-30V DC
12V DC Amps: 1.3A (flood)
24V DC Amps: 600mA (flood)
Conforms to: ABYC A1
|
180.17 |
|
|
Contour Series Navigation/Docking Combination Light - Starboard Green
Innovation – plain and simple. Lumitec’s engineers have combined a bright, sharp 1,000-lumen dock light with a U.S. Coast Guard-approved 2nm navigation light. Easy to install, great looking, and all the reliability you’ve come to expect from Lumitec.
Specifications:
Output: Starboard Green
Visibility: USCG2NM
Flood Lumens: 1000
Voltage: 10-30V DC
12V DC Amps: 1.3A (flood)
24V DC Amps: 600mA (flood)
Conforms to: ABYC A1
|
180.17 |
|
|
Mirage - Flush Mount Down Light - Glass Finish/No Bezel - 3-Color Red/Blue Non Dimming with White Dimming
Lumitec's Mirage down lights remain the best performing down light on the market today. Utilizing the most efficient emitters commercially available, Mirage boasts incredible output and a profile that is among the slimmest in the industry. In field studies Mirage exceeded the output of 20 watt halogens.* Equally suited to elegant salons or no-nonsense T-tops. (*6 watt devices will exceed output of 20 watt halogens, 3 watt devices will exceed output of 10 watt halogens).
Specifications:
Voltage: 10 - 30V DC
12V DC Amps: 490mA
24V DC Amps: 250mA
Correlated Color Temperature: 5000
Color Rendering Index: 70+
Rated Watts: 6
Lumens (White): 372
Operating Temp (°F): -31 to + 131 F
Operating Temp (°C): -35 to +55 C
Width: 2.50" (6.35cm)
Height: 2.50" (6.35cm)
Depth: 1.11" (2.81cm)
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
87.74 |
|
|
Andros - Courtesy Light - Polished Stainless Steel Finish - Warm White Non-Dimming
Lumitec's Andros line of accent/courtesy lights are compact, attractive, surprisingly bright. With a housing of passivated, hand polished or powder coated 316 stainless steel, use inside or out. Choose white, red, or blue light output to illuminate counters, stairs, or companionways. Completely sealed and IP67 compliant, these lights are also suitable for cockpits, hardtops, or illuminating helm stations.
Specifications:
Voltage: 10 - 16V DC
12V DC Amps: 45mA
24V DC Amps: NA
Correlated Color Temperature: NA
Color Rendering Index: NA
Rated Watts: 2
Operating Temp (°F): -31 to + 131 F
Operating Temp (°C): -35 to +55 C
Width: 1.00" (2.54cm)
Height: 1.00" (2.54cm)
Depth: 0.50" (1.27cm)
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
20.38 |
|