|
Lenco Marine
Trim tabs make the single most important difference in the way your boat will ride and perform. Lenco trim tabs will make your boat ride smoother, drier, faster and with increased safety whether on a high-performance, family cruiser or small skiff. Lenco's ballscrew design is more reliable, twice as powerful and features an instant response which makes them very user friendly.
|
|
|
14" x 12" High Performance Trim Tab Kit w/o Switch Kit-12V - Single Actuator
Lenco HP Single & Dual Actuator Electric Trim Tab Kits feature electro-polished 7 Gauge 304SS Blades & Sacrificial Anodes. Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections.
Each kit is factory assembled with extreme duty actuators with 3/8" SS bolts, a full transom back plate, mechanical strain relief cable seal, adjustable C-channel mounting brackets, and 3.75" sacrificial anodes.
Kit Contents:
2 each of stainless steel trim tab planes
2 each of #15056-001 XD extreme duty actuators with 6' lead & Deutsch plugs
Kit is factory assembled with full transom back plate, mechanical strain relief cable seal, adjustable C-channel mounting brackets, and 3.75" sacrificial anodes.
The following to be supplied by customer:
Boat mounting hardware supplied by customer
Actuator extension harnesses (2 for single actuator application or 4 for dual) will be
required. To order the lengths of your choice see the Lenco Accessories Section.
Specifications:
Suggested Boat Length: 16' to 32'
Length of Tab: 14"
Width of Tab: 12"
Minimum Transom Height: 10.5"
Blades: 7 Gauge Stainless Steel
Finish: Electro-Polished
Switch Kit: Sold Separately
Switch Required: 10222-211D, 15069-001
or 15070-001
Class: Fuel Efficient
Compliance: CE Certified
Compatibility: Any Boat
Actuators: 12-volt
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1511.23 |
|
|
18" x 12" High Performance Trim Tab Kit w/o Switch Kit-12V - Single Actuator
Lenco HP Single & Dual Actuator Electric Trim Tab Kits feature electro-polished 7 Gauge 304SS Blades & Sacrificial Anodes. Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections.
Each kit is factory assembled with extreme duty actuators with 3/8" SS bolts, a full transom back plate, mechanical strain relief cable seal, adjustable C-channel mounting brackets, and 3.75" sacrificial anodes.
Kit Contents:
2 each of stainless steel trim tab planes
2 each of #15056-001 XD extreme duty actuators with 6' lead & Deutsch plugs
Kit is factory assembled with full transom back plate, mechanical strain relief cable seal, adjustable C-channel mounting brackets, and 3.75" sacrificial anodes.
The following to be supplied by customer:
Boat mounting hardware supplied by customer
Actuator extension harnesses (2 for single actuator application or 4 for dual) will be
required. To order the lengths of your choice see the Lenco Accessories Section.
Specifications:
Suggested Boat Length: 20' to 40'
Length of Tab: 18"
Width of Tab: 12"
Minimum Transom Height: 10.5"
Blades: 7 Gauge Stainless Steel
Finish: Electro-Polished
Switch Kit: Sold Separately
Switch Required: 10222-211D, 15069-001
or 15070-001
Class: Fuel Efficient
Compliance: CE Certified
Compatibility: Any Boat
Actuators: 12-volt
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1575.28 |
|
|
21" x 14" High Performance Trim Tab Kit w/o Switch Kit-12V - Dual Actuator
Lenco HP Single & Dual Actuator Electric Trim Tab Kits feature electro-polished 7 Gauge 304SS Blades & Sacrificial Anodes. Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections.
Each kit is factory assembled with extreme duty actuators with 3/8" SS bolts, a full transom back plate, mechanical strain relief cable seal, adjustable C-channel mounting brackets, and 3.75" sacrificial anodes.
Kit Contents:
2 each of stainless steel trim tab planes
4 each of #15056-001 XD extreme duty actuators with 6' lead & Deutsch plugs
Kit is factory assembled with full transom back plate, mechanical strain relief cable seal, adjustable C-channel mounting brackets, and 3.75" sacrificial anodes.
The following to be supplied by customer:
Boat mounting hardware supplied by customer
Actuator extension harnesses (2 for single actuator application or 4 for dual) will be
required. To order the lengths of your choice see the Lenco Accessories Section.
Specifications:
Suggested Boat Length: 24' to 42'
Length of Tab: 21"
Width of Tab: 14"
Minimum Transom Height: 10.5"
Blades: 7 Gauge Stainless Steel
Finish: Electro-Polished
Switch Kit: Sold Separately
Switch Required: 15071-001
Class: Fuel Efficient
Compliance: CE Certified
Compatibility: Any Boat
Actuators: 12-volt
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
2216.93 |
|
|
25" x 14" High Performance Trim Tab Kit w/o Switch Kit-12V - Dual Actuator
Lenco HP Single & Dual Actuator Electric Trim Tab Kits feature electro-polished 7 Gauge 304SS Blades & Sacrificial Anodes. Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections.
Each kit is factory assembled with extreme duty actuators with 3/8" SS bolts, a full transom back plate, mechanical strain relief cable seal, adjustable C-channel mounting brackets, and 3.75" sacrificial anodes.
Kit Contents:
2 each of stainless steel trim tab planes
4 each of #15056-001 XD extreme duty actuators with 6' lead & Deutsch plugs
Kit is factory assembled with full transom back plate, mechanical strain relief cable seal, adjustable C-channel mounting brackets, and 3.75" sacrificial anodes.
The following to be supplied by customer:
Boat mounting hardware supplied by customer
Actuator extension harnesses (2 for single actuator application or 4 for dual) will be
required. To order the lengths of your choice see the Lenco Accessories Section.
Specifications:
Suggested Boat Length: 28' to 46'
Length of Tab: 25"
Width of Tab: 14"
Minimum Transom Height: 10.5"
Blades: 7 Gauge Stainless Steel
Finish: Electro-Polished
Switch Kit: Sold Separately
Switch Required: 15071-001
Class: Fuel Efficient
Compliance: CE Certified
Compatibility: Any Boat
Actuators: 12-volt
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
2541.64 |
|
|
4" x 12" Limited Space Trim Tab Kit w/o Switch Kit -12V - Standard Finish - Short Actuator
Lenco Electric Limited Space Trim Tab Kits are ideal for boats with a swim platform and/or ladder. They can be fitted to transoms that have a limited mounting area. Blades are 12 gauge - 304 SS with front of blade folded to provide a smooth trailing edge and 1/8" diameter hinge pin. Fast response electric actuators for precise control. All units have Plug and Play connections and are fully submersible.
Kit Contents:
2 each of 12-gauge 304 stainless steel trim tab blades
2 each of #15057-001 XD actuator with 6' lead and Deutsch plugs
2 each of #30133-103 20' actuator extension wiring harnesses
2 each of #15085-001 (116) upper mounting bracket with gland seal
1 each of the Lenco owner’s / installation manual
All necessary stainless steel mounting hardware
Specifications:
Suggested Boat Length: 14' to 25'
Length of Tab: 4"
Width of Tab: 12"
Minimum Transom Height: 13"
Blades: 12 Gauge Stainless Steel
Finish: Standard
Switch Kit: Sold Separately
Class: Fuel Efficient
Compliance: CE Certified
Compatibility: Any Boat
Actuators: 12-volt
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
580.00 |
|
|
Bennett RetroFit Kit
We make the best boats better!™
Lenco Marine Electric RetroFit Kit for Bennett Trim Tabs
Upgrade your boat with the latest trim tab technology - trouble-free, high performance Lenco electric actuators.
Easy installation:
Use existing Bennett trim planes, lower bracket and switch
Use all existing mounting holes
Lenco RetroFit Kit includes:
2 electric actuators
2 upper mounting brackets
Switch wiring kit
All mounting hardware
Features:
Lenco wire feeds through existing oil line hole in transom
Lenco upper mounting bracket fits existing Bennett mounting holes
Existing Bennett trim tab plane and hinge
Existing Bennett lower bracket
Just 4 Simple Steps:
Remove Bennett actuators, and install Lenco upper mounting brackets on transom
Feed Lenco wires through holes in brackets and through existing oil line holes in transom
Mount Lenco actuators on to new upper brackets and existing Bennett lower brackets
Connect Lenco actuator wires to existing harness.
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
347.93 |
|
|
Bennett RetroFit Kit
We make the best boats better!™
Lenco Marine Electric RetroFit Kit for Bennett Trim Tabs
Upgrade your boat with the latest trim tab technology - trouble-free, high performance Lenco electric actuators.
Easy installation:
Use existing Bennett trim planes, lower bracket and switch
Use all existing mounting holes
Lenco RetroFit Kit includes:
2 electric actuators
2 upper mounting brackets
Switch wiring kit
All mounting hardware
Features:
Lenco wire feeds through existing oil line hole in transom
Lenco upper mounting bracket fits existing Bennett mounting holes
Existing Bennett trim tab plane and hinge
Existing Bennett lower bracket
Just 4 Simple Steps:
Remove Bennett actuators, and install Lenco upper mounting brackets on transom
Feed Lenco wires through holes in brackets and through existing oil line holes in transom
Mount Lenco actuators on to new upper brackets and existing Bennett lower brackets
Connect Lenco actuator wires to existing harness.
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
373.20 |
|
|
Flojet 02135-134 Pump 12V 1.0/70 Pss Sw
Flojet Diaphragm Pump Duplex 12V, 3/8"FNPT Ports, 1.0GPM, 70psi Switch, Polypropylene, EPDM Valves, Santoprene Diaphragm
|
259.66 |
|
|
SHURflo 94-134-00, Micro Switch
|
25.14 |
|
|
Flojet 02130-134 Pump 12V .85/95 Nee Sw
Pump and Motor unit,
12 Vdc
.85 Gpm
95 Psi (max)
Nylon Body Construction, W/ Epdm Diaphragm, & Epdm Check Valve
Pressure Switch
|
317.51 |
|
|
Gianneschi SGM45 Brush GM4 7X14 (Cp25/1)
|
44.85 |
|
|
Gianneschi SGM45A Brushes For CP25/1
|
38.21 |
|
|
BERKELEY S13435, SET OF PACKING RINGS
|
282.10 |
|
|
Flojet D3134H1311A Mpu 12V E/S 2C Bp50
Flojet Duplex II Diaphragm Pump, with Polypropylene Body Construction, EPDM Diaphragm, Santoprene Check Valve, Medium Pressure Cam, NO Switch, 50 PSI Pressure Bypass. Motor is 12 Volt DC. Inlet Port is 3/8 inch NPT Female, Discharge Port is 3/8 inch NPT Female.
|
200.08 |
|