Gianneschi SGM45 Brush GM4 7X14 (Cp25/1)

Gianneschi SGM45A Brushes For CP25/1

Ampco Pumps BI8101271 Impeller Screw

Self-Locking Twisted Shackle - Diameter 10mm - 13/32"  Features: Self-locking twisted shackle forged in grade 316L stainless steel The pin is locked into one of the indentations No risks of loosening due to vibrations Outstanding working and breaking loads Applications: Perfect for applications where a  90° angle twist setup is required Often used to attach an unarticulated part (block on a rail) or on purchases Specifications: Materials: 316 stainless steel grade Working load: (lb) 3170 / (kg) 1440  Breaking load: (lb) 9920 / (kg) 4500  Weight: (lb) 0.28 / (g) 127  Dimensions: A: (inch) 1 31/32" / (mm) 50  B: (inch) 25/32" / (mm) 20  C: (inch) 25/64" / (mm) 10  D: (inch) 3/4" / (mm) 19  D diameter: (inch) 25/64" / (mm) 10  E: (inch) 23/64" / (mm) 9  F: (inch) 2 29/32" / (mm) 74  Caption: Working Load (WL): For nautical applications Working Load Limit (WLL): For industrial applications only. The safety factor is 5 times the breaking load. WLL = Breaking load / 5 *Sold as an Individual

PP5203 PowerPod Pre-Cut for Raymarine c125/c127, e125/e127 PP5200 Series, PowerPods for Power are a better option than bracket mounting. PowerPods provide a clean look for flush mounting with the advantage of a swivel base. The trunion bracket that is supplied with most electronics is not optimal. PowerPods have the advantage of protecting the back of the electronics from harsh saltwater spray. Most manufacturers do an excellent job of protecting the face of the display from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They are expecting you to flush mount it into the console or a NavPod. The PowerPod also protects the plastic connectors and wires from deterioration caused by long term exposure to UV. PowerPods for Sail are for mounting on a flat surface. Perhaps under the dodger or aft end of the cockpit table especially on boats with dual wheels. All PowerPods include: Acrylic capped ABS plastic Chromed Stainless Steel tamper-proof fasteners Double seal for watertight integrity Swivel Base with large pass-through for wire harness Models are available Pre-Cut for popular electronics Sizing: Overall Size: 14.5"H x 16.625"W x 10.5"D Usable Face: 9.375"H x 14.5"W x 6.75"D Max Cutout: 9.375"H x 14.25"W

SHURflo 4148-163-E75, Diaphragm Pump Aqua King II Premium 4.0 24V SHURflo Diaphragm Pump 4 Chamber, Aqua King II Premium 4.0, 24VDC Intermittent Duty Sealed Motor, Up To 4.0GPM Open Flow, 55PSI Adjustable Demand Switch and Adjustable Bypass, 1/2” x 14 NPSM Male Threaded Ports, Includes Two 1/2” Hose Barb Straight Swivel Fittings and a 50 Mesh Strainer That Connects Directly to the Pump Inlet Port, 5.3 Amps, Ignition Protected, CE Rated, Fresh Water Pump. Same Pump as OEM Model 4148-163-A75.

SHURflo 4158-163-E75, Diaphragm Pump Aqua King II Supreme 5.0 24V SHURflo Diaphragm Pump 4 Chamber, Aqua King II Supreme 5.0, 24VDC Intermittent Duty Sealed Motor, Up To 5.0GPM Open Flow, 55PSI Adjustable Demand Switch and Adjustable Bypass, 1/2” x 14 NPSM Male Threaded Ports, Includes Two 1/2” Hose Barb Straight Swivel Fittings and a 50 Mesh Strainer That Connects Directly to the Pump Inlet Port, 6.0 Amps, Ignition Protected, CE Rated, Fresh Water Pump. This is the same pump as OEM Model 4158-163-A75.

AQUA KING™ II Premium Fresh Water Pump - 12VDC - 4.0 GPM SHURFLOr's AQUA KING II fresh water pump is designed for boats with multi-fixtures providing "Just like home" shower pressure, and can operate at lower flow conditions with low cycling. A built in mechanical bypass function enables these pumps to vary the flow rate for any on demand condition, without the need for an accumulator. With a heavy duty motor built to withstand the tough marine environment, this motor features an electro-coated seamless shell motor, O-ring sealed end bells, and complete sealed wire entries on the motor shell and pressure switch. The AQUA KING II fresh water pump can run dry without damage. Inlet strainer and 1/2" hose barb fittings are included (aftermarket models only). Ignition protected. Thermally protected. Features: 4901 Replacement Sealed Switch Sealed Motor Corrosion Resistant Electro Coated Motor Independent Chambers Built-In Check Valve Co-Molded Diaphragm Adjustable Switch & By-Pass Self-Priming up to 6 Feet Dry Run Capability Thermally Protected Ignition Protected, CE

AQUA KING™ II Supreme Fresh Water Pump - 12 VDC - 5.0 GPM SHURFLO's AQUA KING II fresh water pump is designed for boats with multi-fixtures providing "Just like home" shower pressure, and can operate at lower flow conditions with low cycling. A built in mechanical bypass function enables these pumps to vary the flow rate for any on demand condition, without the need for an accumulator. With a heavy duty motor built to withstand the tough marine environment, this motor features an electro-coated seamless shell motor, O-ring sealed end bells, and complete sealed wire entries on the motor shell and pressure switch. The AQUA KING II fresh water pump can run dry without damage. Inlet strainer and 1/2" hose barb fittings are included. Ignition protected. Thermally protected. Features: 5901 Replacement Sealed Switch Sealed Motor Corrosion Resistant Electro Coated Motor Independent Chambers Built-In Check Valve Co-Molded Diaphragm Adjustable Switch & By-Pass Self-Priming up to 6 Feet Dry Run Capability Thermally Protected Ignition Protected, CE

Drive Assembly f/4138 Series AQUA KING™ PUMPS For the Following Pumps: AQUA KING™ Standard AQUA KING™ Standard - 24VDC

AQUA KING™ II Supreme 5.0 (24VDC) Fresh Water Pump w/Strainer & Fittings SHURFLO®’s AQUA KING™ II Fresh Water Pumps are designed for boats with multi-fixtures providing “Just like home” shower pressure, and can operate at lower flow conditions without cycling. A built in mechanical bypass function enables these pumps to vary the flow rate for any on demand condition, without the need for an accumulator. With heavy duty motors built to withstand the tough marine environment these motors feature an electro-coated seamless shell motor, O-ring sealed end bells, and complete sealed wire entries on the motor shell and pressure switch. The AQUA KING™ II Fresh Water Pumps can run dry without damage. Inlet strainer and ½" hose barb fittings are included. (aftermarket models only). Ignition protected. Thermally protected. 3 Year Warranty Features: Sealed Switch Sealed Motor Corrosion Resistant Electro Coated Motor Independent Chambers Built-in Check Valve Co-Molded Diaphragm Adjustable Switch & By-Pass Self-Priming up to 6 Feet Dry Run Capability Thermally Protected Ignition Protected, CE Specifications: 24 VDC 5.0 GPM [18.9 LPM] 7 Amps (Max.) 55 PSI [3.8 BAR] Intermittent Duty Multi-fixture Applications 1/2" NPS-M Inlet/Outlet

King Fish Rod Holder Bolt-on king fish rod holder. Designed to mount under the hardtops, for King Fish. They are also great for Stripper Bass and running Mojos. Powder-coated white to match most hardtops. Mount with four 1/4" bolts, hardware not included. Please measure your hardtop before ordering.

11" Threaded King Pin Pedestal Post This King Pin post is built for King Pin applications. Features: 11" post  Threaded

Intellian/KVH/Raymarine/Sea King/SeaTel Mounting Plate With Edson's Vision Series Mounting System, you can select your desired Mounting Plate to best fit your electronics. Edson's 68600 Vision Series Mounting Plate is designed for Raymarine 33STV & 37STV , Sea-King 15, SeaTel C14, Intellian i1, i2, &i3, and KVH M1, M2, M3, V3, TV1, TV3. Specifications: Mounting Plates are required to complete an Edson Vision Series Mounting System.  Base mounts sold separately

Intellian/KVH/Raymarine/Sea King/SeaTel Mounting Plate With Edson's Vision Series Mounting System, you can select your desired Mounting Plate to best fit your electronics. Edson's 68590 Vision Series Mounting Plate is designed for Intellian i4, k4, d4, Raymarine 45STV, Sea King 18, SeaTel C18 & C24, KVH M5 & TracPhone 50, & TV5.  Specifications: Mounting Plates are required to complete an Edson Vision Series Mounting System.  Base mounts sold separately