Johnson 10-13406-103 Series 4.0 Aqua Jet Water Pressure System Johnson Pump 10-13406-103 Aqua Jet 4 GPM Water Pressure Pump. The new generation of WPS pumps - 12V DC. Quiet and pulsation-free even at low speeds, the new Aqua Jet five-chamber diaphragm pump from SPX Johnson Pump provides the perfect water pressure solution for both small and medium sized leisure and commercial boats. WPS 3.5 fitted with a built-in pulsation dampening by-pass to control unwanted cycling and noise.   4.0 GPM Aqua Jet Water Pressure System Pump 12 volt DC operation Smooth and pulsation free flow due to five chamber design Lower noise and water pulsation characteristics when compared to conventional three or four chamber diaphragm pumps Designed to use with an accumulator tank Capacity: 4 GPM Pressure Cut in: 24 PSI Pressure Cut off: 41 PSI Fuse Size: 10 amp Connection: 3/8 in. NPT/hose 1/2 in. 1/2 in. NPT /hose 3/4 in. 1/2 in.-14NPSM Motor: 100W Length: 9.46 in. Width: 8.42 in. Height: 4.33 in.   Johnson 10-13406-103    4.0 Aqua Jet Water Pressure System 12V  

Flojet 02090-103 Kit Flojet Pressure Switch Kit, 45 PSI, Direct Mount Style, Includes Buna, EPDM and Viton Rubber Membranes. 32psi cut-on / 45psi cut-off   Fits the 4300-143, 4300-504, 4300-142, 4300-500 pressure booster pumps. It can also be used to boost lower pressure pump models that use the 2090 style pressure switch.    

Flojet 02095-103 Kit P/S 32-45Psi Threaded 45 psi pressure switch kit Fits following models: 2100-919 and some 4000 series 1/4″ NPT port  

Flojet 21010-103 Diaphragm Kit Epdm/Nyl New  

Gianneschi SGM45 Brush GM4 7X14 (Cp25/1)

Gianneschi SGM45A Brushes For CP25/1

Jabsco 1039-0000 Lip Seal  

URC-103 Master Controller for RCL-100 LED Searchlight  Replacement controller which controls On/Off, rotation speed and the XRCiZ feature of the RCL-100 LED searchlight. Compatible With: RCL-100 LED searchlight In the Box: URC-103 Controller Connectors *Sold as an Individual 

103 Oar Lock Adapter Post This post adapts to all Scotty rod holder mounts, and can then be fitted into the No. 248 Oar Lock Mount socket.

URP-103 Wi-Fi Remote Control Module for RCL-100 LED This Wifi Remote Control Module will give you the flexibility of controlling your RCL-100LED and RCL-100D straight from your mobile phone.  To control and operate the Wi-Fi Module you will need - Suitable iOS or Android smart phone or tablet External GPS if you wish to display Position data on a Wi-Fi only iPad or other mobile device with no internal GPS The Wi-Fi module has an integral Power/Data cable with four wires. The function of each wire is shown on the product label.  The Wi-Fi Module has an NMEA0183 input that allows an external GPS to provide position information for display in the ACR Searchlight App. Compatible With: RCL-100 LED and RCL-100D *Sold as an Individual  WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Hydra-Cell A01-114-3402 Fg 103 Food Grade Oil-Quart

SC103 Radar Pole Mount - 6' Totally universal, the Scanstrut SC103 Pole Mount installs your radar onto the deck or transom of your boat. Supplied as a complete kit, you will have everything you need for a quick and easy installation.  The anodized aluminium base gives choice when deciding where you wish to install the pole mount, it has a rotation of 360 degree that enables the pole to be installed on both sloping transoms and level decks.  The Pole features two cable channels with a cover strip to hold cables in place and out of view.  Made from marine-grade aluminium and coated with a 4-step marine paint system, making sure that your pole mount stays looking its best year in, year out, whatever the oceans throw at it. Compatible with: Furuno - 1621, 1622, 1623, 1715, 1724, 1734, 1815, 1824, 1832, 1834, 1835, DRS2D, DRS42DL, DRS42DL+, DRS4D / DRS4D-NXT, DRS4W, NavNet (18"), NavNet (24"), SC33 Sat Compass radars Glomex - Pandora v8001, RHEA V8100, Urania V9331, V9000 and V9001 series radars Humminbird - AS 21RD4KW radar Intellian - FB150 in i2, FB250 in i2, FB250R in i2, i1 radars Interphase - Mini RE-1, RE-8, RE-9 radars JRC - 1000, 1000mk2, 1066, 1500, 1500mk2, 1800, 2000,  JMA 2343 / 5104 [Radome: NKE-2042] radars Koden - 2kW 12", 4kW [RB715A] radar KVH - TracVision M1, TracVision TV1 radar Lorenz - Lorenz 2kW Lowrance - LRA-1800 / RB714A / DX42, LRA-2400 HD radars Majestic - SATMAR32, SATMAR32D, SATMAR37D Navman - 8000 Series [8084/8120] 18", 8000 Series [8084/8120] 24" radars Nobeltec - 2kW (20"), 4kW [IR2-4D 25" 4Kw] radars Northstar - M series/8000i (18"), M series/8000i (24") radars Raymarine -  33STV radar Seiwa - SWR-1, SWR-8, SWR-9 radars Simrad - GB40 / NX40/45 / NSE8/12 / RB712A / DX42S, GB40 / NX40/45 / NSE8/12 DX64S radars Sitex - MDS -1, MDS -8, MDS -9, MDS-12, NKE-1066 radars Techmarine - T-72.01, T-72.02, T-72.04 radars Features: Adjustable base, able to rotate 360°.  Base enables the pole to be installed on both sloping transoms and level decks.   Unique pole extrusion accommodates two (2)  cable channels with a cover strip to hold cables in place Supplied with two support modules providing maximum fore / aft and sideways bracing Easily removed for racing or winter storage, leaving just low profile base on deck Technical Specifications: Radar Type - Dome Material - Aluminium Height - 6.4" (1.9M) Mounting Type - Pole Mount In the Box: Pole mount Top plate Deck strut Mounting hardware  Installation manual *Sold as an Individual

GP1036 SailPod Pre-Cut for Furuno NavNet TZtouch 14.1" Multi Touch for 9.5" Wide Guard GP1030 Series for 9.5" Guard, SailPods for Sail are for mounting a single radar or chartplotter at the helm where you can easily operate and clearly see the fine details of the screen. A single SailPod is best mounted on a Single Bend AngleGuards or use a Double Bend AngleGuards to fit an InstrumentPod on the top vertical section and SailPod below on the angled section. SailPod for Power are for mounting on a SK135 Stachion Kit can be used to mount a SailPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SailPod for overhead mounting applications. Sizing: Overall Size: 11.75"H x 17.75"W x 7.125"D Usable Face: 9.5"H x 15.125"W x 5.75"D Max Cutout: 9.5"H x 15"W All SailPods include: Acrylic capped ABS plastic Chromed stainless steel tamper-proof fasteners and wrench Double seal for watertight integrity Models are available pre-cut for popular electronics Stainless steel mounting hardware and mounting gaskets

GP1037 SailPod Pre-Cut for Furuno GP1920C/NT for 9.5" Wide Guard GP1030 Series for 9.5" Guard, SailPods for Sail are for mounting a single radar or chartplotter at the helm where you can easily operate and clearly see the fine details of the screen. A single SailPod is best mounted on a Single Bend AngleGuards or use a Double Bend AngleGuards to fit an InstrumentPod on the top vertical section and SailPod below on the angled section. SailPod for Power are for mounting on a SK135 Stachion Kit can be used to mount a SailPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SailPod for overhead mounting applications. Sizing: Overall Size: 11.75"H x 17.75"W x 7.125"D Usable Face: 9.5"H x 15.125"W x 5.75"D Max Cutout: 9.5"H x 15"W All SailPods include: Acrylic capped ABS plastic Chromed stainless steel tamper-proof fasteners and wrench Double seal for watertight integrity Models are available pre-cut for popular electronics Stainless steel mounting hardware and mounting gaskets

GP1035 SailPod Pre-Cut for Garmin 4012/4212 for 9.5" Wide Guard GP1030 Series for 9.5" Guard, SailPods for Sail are for mounting a single radar or chartplotter at the helm where you can easily operate and clearly see the fine details of the screen. A single SailPod is best mounted on a Single Bend AngleGuards or use a Double Bend AngleGuards to fit an InstrumentPod on the top vertical section and SailPod below on the angled section. SailPod for Power are for mounting on a SK135 Stachion Kit can be used to mount a SailPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SailPod for overhead mounting applications. Sizing: Overall Size: 11.75"H x 17.75"W x 7.125"D Usable Face: 9.5"H x 15.125"W x 5.75"D Max Cutout: 9.25"H x 15"W All SailPods include: Acrylic capped ABS plastic Chromed stainless steel tamper-proof fasteners and wrench Double seal for watertight integrity Models are available pre-cut for popular electronics Stainless steel mounting hardware and mounting gaskets