Shurflo 8020-513-236 Pump 115V 60Sw Pvs Shurflo- Diaphragm Pump 3 Chamber, 1.5 GPM Open Flow, 115VAC Intermittent Duty, 60 PSI Demand Switch (adjustable 40-60 PSI), Viton Valves, Santoprene Diaphragm, Polypropylene Housing, 3/8" NPT Female Ports, Has a Power Cord, UL/CSA Recognized, General Industrial Pump

Detroit Diesel 5196513 Gasket  

Tuthill 1LEV-C-A-88513-7 Pump And Motor

5138 30AMP MAXI Fuse Features: Economical Tin-plated connector blades for corrosion resistance Visible indication of blown condition WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

5139 40AMP MAXI Fuse Features: Economical Tin-plated connector blades for corrosion resistance Visible indication of blown condition WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

5136 ANL Fuse 400A Ignition protected (conforming to SAE J1171)- safe for installation aboard gasoline powered boats Silver-plated connector blades for corrosion resistance Visible indication of blown condition 6,000 Ampere Interrupt Capacity (AIC) satisfies ABYC requirements for main DC circuit protection on large battery banks For use with Blue Sea Systems' ANL Fuse Blocks WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Oberdorfer 935136C Pump Ss  

ROKK Midi Universal Top Plate Self-drill Plate.  Universal design ensures you only need to drill holes for the footprint of your specific display using the template and jig provided.  The RL-513 is one (1) part of a system based around 4 different heavy-duty anodized aluminum mounts that allow your device to attach to the ROKK Midi to unlock its incredible features. Features: Engineered to withstand high shock loading. Universal design ensures you only need to drill holes for the footprint of your specific display using the template and jig provided Template is color coded for different electronics to make identifying the holes you need to drill as easy as possible Technical Specifications: Material - ASA Plastic Dimensions (L x W) -  7.67" x 2.52" (195 x 64 mm) Compatible with the following products *Sold as an Individual

ROKK Mini Mount Kit - Fixed Mount - Universal Top Plate Universal design ensures you have all the pieces needed to mount a variety of electronics on a Scanstrut Mini Mount and Adjustable Body. The hi-performance ROKK mini modular system allows you to attach your electronics to boats, cars, off-road vehicles, aircraft and more.  Move your electronics conveniently between different types of base mounts in different locations in one easy click.  Want to unlock multiple mounting options in different locations or simply mount a different electronic device?  Just add another top or base to your modular kit and extend possibilities of your ROKK mini starter kit. This three (3) part kit installs in minutes and allows quick release of mounted equipment. Features: Engineered to withstand high shock loading. Universal design top plate ensures you only need to drill holes for the footprint of your specific display using the template and jig provided.  Template is color coded for different electronics to make identifying the holes you need to drill as easy as possible Base secures to a flat surface with included hardware. In the Box: RLS -401 ROKK Mini Surface Mount RLS-AM ROKK Mini Adjustable Arm RLS-513 ROKK Universal Top Plate *Sold as a Kit

Genoa Car - Fits 25mm (1") T Track Features a precision-turned Ertalyte sheave, through-bolted for extra strength. The positive action plunger mechanism has an easy-grip knob A popular range of Genoa cars and sliders designed to run on a 25mm (1") 'T' track. All are manufactured from high-quality marine grade aluminum with our unique 'Spectro' grey anodized finish for added protection. Features: 'Spectro' grey anodized finish Anodized and supplied in metric lengths The stainless steel plunger stops with positive action Molded nylon slide inserts ensure free running Large, easy-grip plunger knobs Heavy-duty Genoa car options Variety of applications on larger dinghies, dayboats, and light cruisers/racers Cars and sliders are compatible with all makes of 'T' track Modified slider inserts available for obscure sizes 25mm 'T' Section Track Drilled for fastenings and plunger stops Specifications and Dimensions: Length: 80mm (3.15") Width: 42mm (1.65") Height: 87mm (3.43") Sheave Ø: 40mm (1.57") Max Rope Ø; 2 x 12mm (2 x 0.47") Break Load: 2,280kg (5,026.54lbs) SWL: 1,140kg (2,513.3lbs) Weight: 247g (0.54lbs)

StarPod Kit for Starlink Roam/RV Antenna - Housing & Base The StarPod from NavPod is a waterproof housing designed for permanent mounting of the Starlink Roam/RV antenna, typically on a yacht’s hardtop or radar arch. The StarPod housing fits Starlink model UTA-212 (dish face measuring 20.2” x 11.9” / 513 mm x 303 mm). NavPod model SP212-K is the StarPod Kit, which includes the StarPod housing and a black powder-coated aluminum base. The included base is 8.25" tall with a 4" outer diameter and has a 6" circular footprint with four screw mounting holes. Third-Party Accessory Disclaimer: The NavPod and StarPod brands are in no way affiliated with the Starlink or SpaceX brands. The company's products are third-party accessories, distinct from the brands and products they are designed to house. What are the benefits of mounting a Starlink dish in a StarPod? StarPod protects Starlink and completely encloses the Starlink antenna in a very sturdy and attractive waterproof housing. Testing has proven that there is no degradation of signal inside the thermoformed acrylic-capped ABS housing. The Starlink Roam dish was originally designed for RVs, not boats. Its waterproof rating of IP54 is a long way from the IP67 rating NavPod is accustomed to in boating from the likes of Garmin, Raymarine, and others. Mounting a Starlink dish inside a StarPod provides additional protection from water intrusion, just as all NavPods have done for other marine electronics for over 25 years. How do I mount a Starlink dish inside a StarPod? The 4-legged "X" base that comes with a Starlink Roam dish is not utilized when mounting inside a StarPod; only the dish and attached mounting pole are used. The center post of the Starlink dish is inserted through the center hole in the bottom of the StarPod and extends into the chosen mounting pedestal. The initial Starlink setup process should be completed before mounting the dish inside a StarPod (refer to your Starlink setup and installation guide for this process). One important thing to note during the setup process is to make sure that the "Snow Melt" setting in the Starlink app is turned to "Off" (this feature produces excess heat to keep snow from piling up on a Starlink dish in winter environments, but is unnecessary and can potentially cause overheating when the dish is mounted inside a housing). Once the initial Starlink setup process is complete, the next step is to get the dish into a horizontal, or "flat" position, perpendicular to the mounting post. To get the dish into this position, unplug the Starlink dish, then plug it back in and turn it on. The dish will begin to move as part of its startup process, so just wait until it’s in a horizontal position and unplug the dish. This may take a couple of attempts, so just repeat as necessary until the dish is powered off in a horizontal or "flat" position. At this point, the dish can now be mounted inside the StarPod housing (using the instructions and hardware included with the StarPod). How can the Starlink dish move if it’s inside a StarPod? It can’t, but that’s okay. When powered on inside the StarPod housing, the Starlink dish will initially move as it looks for a signal. However, when the dish bumps into the inside of the housing and is unable to move any further, it will simply register an obstruction and discontinue its movement (a feature built into the dish to prevent the motor from burning out when it’s positioned next to a tree branch, ceiling, or other obstruction). The StarLink app may notify you of the obstruction, but the dish will continue to operate normally otherwise. There are several methods you can find on the internet for disabling your Starlink motor to achieve a fixed position. While these methods can be effective, it’s important to note that any modification of your Starlink antenna (drilling or cutting into the case, disconnecting internal cables, or any disassembly at all) will void the product warranty. If the Starlink dish can’t move, how can it get a good signal? Short Answer: A Starlink dish installed on a boat in a fixed horizontal position will achieve the same signal quality as a dish that’s free to move and adjust position. Long Answer: The Starlink Roam dish utilizes phased array technology. Rather than searching for a single satellite to point to (like older 18" and 24" satellite TV antennas), the Starlink dish is continuously switching between different satellites every few minutes (satellites that are moving at very high speeds and orbiting much lower than traditional TV and internet satellites). When a Starlink dish moves, it isn’t trying to point toward a particular satellite; it’s just looking for a clear view of the sky. Since this dish was originally designed for RV use, the movement of the dish was designed to allow it to point away from overhead obstructions like trees and buildings that might prevent a clear view of the sky. While this functionality makes sense for RV use, it is much less functional for boating use, where the dish would almost never encounter any overhead obstructions. When testing, a Starlink dish mounted and immobilized inside a StarPod achieved the same signal quality and internet speed as a dish that was free to move outside of a housing. Neither the fixed horizontal positioning nor the housing material itself resulted in any signal degradation as long as the dish had an otherwise clear view of the sky (as it typically would on a floating vessel). Liability Disclaimer: NavPod assumes no liability for any violation of Starlink product warranty or terms of service that may result from modifying a Starlink dish or mounting it inside a StarPod. General Information: StarPod is manufactured by Ocean Equipment in Bend, Oregon, USA, using the same time-proven materials that are used to fabricate the popular line of NavPods, waterproof housings for marine electronics. All NavPods Feature: Structural Rigidity – The Gen3 enhancements now include a thicker gauge of acrylic-capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening, and the more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic. Waterproof Seal – All NavPods are manufactured with a double gasket system, providing an excellent watertight seal. This seal provides the best protection for your marine electronics. StarPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with an improved flush fit. The internal Poron Microcell Polyurethane gasket is now 50% thicker and is not subject to a "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics. The gasket will continue to do its job. Nickel Chrome-Plated Stainless Steel – The company uses all 316 stainless steel hardware that is supplied with each NavPod. Large round-head tamper-resistant screws have deeper sockets to match the NavPod wrench for better holding ability when tightening. The nickel-chrome-plated stainless steel tamper-resistant screws provide security combined with a little style! Commitment to Quality – Navpod stands behind its commitment by offering a 10-year warranty on all new NavPods, including the StarPod.

StarPod Housing Only for Starlink Roam/RV Antenna - Base Not Included The StarPod from NavPod is a waterproof housing designed for permanent mounting of the Starlink Roam/RV antenna, typically on a yacht’s hardtop or radar arch. The StarPod housing fits Starlink model UTA-212 (dish face measuring 20.2” x 11.9” / 513 mm x 303 mm). NavPod model SP212-H includes the StarPod housing only and is intended for installations where the housing will be mounted on an existing or third-party pedestal. A compatible pedestal should have an upper mounting surface no larger than a 7.5” diameter circle, which is the available mounting surface on the bottom of a StarPod housing. Third-Party Accessory Disclaimer: The NavPod and StarPod brands are in no way affiliated with the Starlink or SpaceX brands. The company's products are third-party accessories, distinct from the brands and products they are designed to house. What are the benefits of mounting a Starlink dish in a StarPod? StarPod protects Starlink and completely encloses the Starlink antenna in a very sturdy and attractive waterproof housing. Testing has proven that there is no degradation of signal inside the thermoformed acrylic-capped ABS housing. The Starlink Roam dish was originally designed for RVs, not boats. Its waterproof rating of IP54 is a long way from the IP67 rating NavPod is accustomed to in boating from the likes of Garmin, Raymarine, and others. Mounting a Starlink dish inside a StarPod provides additional protection from water intrusion, just as all NavPods have done for other marine electronics for over 25 years. How do I mount a Starlink dish inside a StarPod? The 4-legged "X" base that comes with a Starlink Roam dish is not utilized when mounting inside a StarPod; only the dish and attached mounting pole are used. The center post of the Starlink dish is inserted through the center hole in the bottom of the StarPod and extends into the chosen mounting pedestal. The initial Starlink setup process should be completed before mounting the dish inside a StarPod (refer to your Starlink setup and installation guide for this process). One important thing to note during the setup process is to make sure that the "Snow Melt" setting in the Starlink app is turned to "Off" (this feature produces excess heat to keep snow from piling up on a Starlink dish in winter environments, but is unnecessary and can potentially cause overheating when the dish is mounted inside a housing). Once the initial Starlink setup process is complete, the next step is to get the dish into a horizontal, or "flat" position, perpendicular to the mounting post. To get the dish into this position, unplug the Starlink dish, then plug it back in and turn it on. The dish will begin to move as part of its startup process, so just wait until it’s in a horizontal position and unplug the dish. This may take a couple of attempts, so just repeat as necessary until the dish is powered off in a horizontal or "flat" position. At this point, the dish can now be mounted inside the StarPod housing (using the instructions and hardware included with the StarPod). How can the Starlink dish move if it’s inside a StarPod? It can’t, but that’s okay. When powered on inside the StarPod housing, the Starlink dish will initially move as it looks for a signal. However, when the dish bumps into the inside of the housing and is unable to move any further, it will simply register an obstruction and discontinue its movement (a feature built into the dish to prevent the motor from burning out when it’s positioned next to a tree branch, ceiling, or other obstruction). The StarLink app may notify you of the obstruction, but the dish will continue to operate normally otherwise. There are several methods you can find on the internet for disabling your Starlink motor to achieve a fixed position. While these methods can be effective, it’s important to note that any modification of your Starlink antenna (drilling or cutting into the case, disconnecting internal cables, or any disassembly at all) will void the product warranty. If the Starlink dish can’t move, how can it get a good signal? Short Answer: A Starlink dish installed on a boat in a fixed horizontal position will achieve the same signal quality as a dish that’s free to move and adjust position. Long Answer: The Starlink Roam dish utilizes phased array technology. Rather than searching for a single satellite to point to (like older 18" and 24" satellite TV antennas), the Starlink dish is continuously switching between different satellites every few minutes (satellites that are moving at very high speeds and orbiting much lower than traditional TV and internet satellites). When a Starlink dish moves, it isn’t trying to point toward a particular satellite; it’s just looking for a clear view of the sky. Since this dish was originally designed for RV use, the movement of the dish was designed to allow it to point away from overhead obstructions like trees and buildings that might prevent a clear view of the sky. While this functionality makes sense for RV use, it is much less functional for boating use, where the dish would almost never encounter any overhead obstructions. When testing, a Starlink dish mounted and immobilized inside a StarPod achieved the same signal quality and internet speed as a dish that was free to move outside of a housing. Neither the fixed horizontal positioning nor the housing material itself resulted in any signal degradation as long as the dish had an otherwise clear view of the sky (as it typically would on a floating vessel). Liability Disclaimer: NavPod assumes no liability for any violation of Starlink product warranty or terms of service that may result from modifying a Starlink dish or mounting it inside a StarPod. General Information: StarPod is manufactured by Ocean Equipment in Bend, Oregon, USA, using the same time-proven materials that are used to fabricate the popular line of NavPods, waterproof housings for marine electronics. All NavPods Feature: Structural Rigidity – The Gen3 enhancements now include a thicker gauge of acrylic-capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening, and the more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic. Waterproof Seal – All NavPods are manufactured with a double gasket system, providing an excellent watertight seal. This seal provides the best protection for your marine electronics. StarPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with an improved flush fit. The internal Poron Microcell Polyurethane gasket is now 50% thicker and is not subject to a "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics. The gasket will continue to do its job. Nickel Chrome-Plated Stainless Steel – The company uses all 316 stainless steel hardware that is supplied with each NavPod. Large round-head tamper-resistant screws have deeper sockets to match the NavPod wrench for better holding ability when tightening. The nickel-chrome-plated stainless steel tamper-resistant screws provide security combined with a little style! Commitment to Quality – Navpod stands behind its commitment by offering a 10-year warranty on all new NavPods, including the StarPod.

Here is a list of some of the new items we have added ofer the last few days at CLR Marine.   Part Number              Product Title   10992    LILLY 406 SHIM/LONG TAPER 13762    INTERPHASE T1-1200-032 BT 200K HOR/VERT SCAN F/ TWIN PC/VIEW 16561    STANDARD HX471SS SILVER VHF HH AM002N005 17598    C-MAP AF-M204 SD CARD FORMAT SOUTHERN AFRICA 19030    BLUE SEA 7114 CIRCUIT BREAKER 80A 20216    BLUE SEA 2207 BLACK TERMINAL FEED-THROUGH 25433    MINN KOTA MK-330 3 BANK X 10 AMPS 27937    MUSTANG LIL' LEGENDS INFANT'S FLOATER VEST UP TO 30 lbs. 28704    SIMRAD TM NYLON D/S/T 600W TRI-DUCER 50/200 FOR NX40,45 31398    MINN KOTA PONTOON 55/HAND 12V 55LB 52" 33308    PROMARINER PRONAUTIC REMOTE DISPLAY HELM CONTROL / REMOTE 34940    FULTON 3200# CABLE WINCH 2-SPD W/ BRAKE HP SERIES 35446    NAVPOD PP4301 POWERPOD PRECUT FOR RAYMARINE ST60 39439    AQUATIC 6.5" WATERPROOF STEREO SPEAKER BLACK GRILL-PAIR 39892    OTTERBOX DEFENDER SERIES CASE HTC DESIRE 41017    OTTERBOX COMMUTER SERIES NOKIA E7 42050    MIDLAND NT3 5 WATT HANDHELD VHF RADIO W/ BELT CLIP 42531    JABSCO PAR-MAX WASHDOWN PUMP KIT 4.0GPM 60PSI 12VDC 42532    ONYX 7501 FLOTATION JACKET LARGE NAVY BLUE 42533    ONYX 7501 FLOTATION JACKET LARGE RED/GREY 42534    ONYX 7501 FLOTATION JACKET X-LARGE NAVY BLUE 42535    ONYX 7501 FLOTATION JACKET X-LARGE RED/GREY 42576    TIMEX IRONMAN 10 LAP MID SIZE WATCH BRIGHT GREEN 42577    TIMEX IRONMAN 30 LAP OVERSIZE WATCH BLUE/BLACK/SILVER 42584    TIMEX IRON KIDS DIGITAL WATCH BLUE/SILVER   42462    HUMMINBIRD FISHFINDER 570 42505    GARMIN NUVI 3450 42508    GARMIN GTM 60 DIGITAL 3D TRAFFIC RX 2400 3400 SERIES 42509    GARMIN NUVI 2455LT 42511    GARMIN NUVI 2475LT 42513    GARMIN NUVI 2555LT 42521    JABSCO AUTOMATIC WATER SYSTEM PUMP 4.0GPM 50PSI 12VDC 42522    JABSCO AUTOMATIC WATER SYSTEM PUMP 4.0GPM 50PSI 24VDC 42523    JABSCO AUTOMATIC WATER SYSTEM PUMP 4.0GPM 25PSI 12VDC 42524    JABSCO AUTOMATIC WATER SYSTEM PUMP 4.0GPM 25PSI 24VDC 42525    JABSCO AUTOMATIC WATER SYSTEM PUMP 5.0GPM 50PSI 12VDC 42526    JABSCO AUTOMATIC WATER SYSTEM PUMP 5.0GPM 50PSI 24VDC 42527    JABSCO AUTOMATIC WATER SYSTEM PUMP 5.0GPM 25PSI 12VDC 42528    JABSCO AUTOMATIC WATER SYSTEM PUMP 5.0GPM 25PSI 24VDC 42529    JABSCO AUTOMATIC WASHDOWN PUMP 5.0GPM 70PSI 12VDC 42551    TIMEX HEALTH TOUCH HRM WATCH SILVER/BLACK/RED 42552    TIMEX HEALTH TOUCH HRM WATCH BLACK/SILVER 42553    TIMEX HEALTH TRACKER WATCH BLUE/GRAY FLOWER 42554    TIMEX HEALTH TRACKER WATCH BLACK/GRAY FLOWER 42559    TIMEX IM ALLDAY 50 LAP PLUM SILICONE MS WATCH   37676    NAVIONICS PLATINUM SOUTH AMERICA EAST ON SD/MICRO SD 37679    NAVIONICS PLATINUM SOUTH AMERICA EAST ON CF CF/909P-2 42306    KESTREL RH CALIBRATION KIT RELATIVE HUMIDITY 42588    POWERHOUSE ICE EATER 1 HP 115V WITH 100FT CORD 42589    POWERHOUSE ICE EATER 1 HP 230V WITH 100 FT CORD 42590    POWERHOUSE TIMER 115V    

Food Grade Anti-Seize with Syncolon® - 11oz Super Lube® Food Grade Anti-Seize Lubricant with Syncolon® is used to improve gasket performance and removal and prevents thread galling during installation. It is also used in thermal cycling, dissimilar metal corrosion and it protects joints from corrosive environments. Super Lube® Food Grade Anti-Seize Lubricant with Syncolon® contains no heavy metals, is capable of handling temperatures to 475°F (246°C) and is environmentally friendly. Super Lube® Food Grade Anti-Seize Lubricant with Syncolon® is an NSF registered Food Grade lubricant, rated H1 for incidental food contact and meets former USDA (H1) guidelines. Super Lube® Food Grade Anti-Seize Lubricant with Syncolon® is Kosher Certified.

HYDRO 6.5" Compact Wakeboard Pod Tower with RGB Light - 300W - Black The DS18 Hydro Compact Marine Series is rugged yet comes with a sleek design, provide its users with trouble free, waterproof (IP65) and amazing sound quality.  Engineered for all elements, these speakers are a great addition to your marine life and motorsports!  The Hyrdo Compact Series come in 6.5" and 8" MAX Power up to 375W! Also equipped with an integrated RGB LED Lighting, high temp injection molded composite, ASA Grills with UV coating and a high gloss basket with UV coating. Compatible with DS18 LED-BTC. Features: Waterproof Electronics for all the elements Integrated RGB lights with optional remote. IP65 Marine Grade Compliant Specifications - 100% UV Stable Die Cast Solid Aluminum 360-degree Rotation Led Color Options: Red - Blue - Green Technical Specifications: Size - 6.5" RMS Power - 100W MAX Power - 300W Sensitivity - 91dB Normal Impedance - 4 Ohm Frequency Response - 65Hz - 23KHz Speaker Coil Diameter - 1.2"  FS-Free Air Resonance - 65HZ Mounting Height - 7.7"  Mounting Depth - 6.25"  Mounting Diameter - 6.93"  Color - Black *Sold as a Pair