2-7/8" Heavy Duty Mainstay with Swivel Non-removable pedestal system in 2-7/8" offers a heavy-duty base and post for today's larger and faster recreational boats. The base is permanent mold AC7A aluminum alloy with an anodized finish for maximum strength and corrosion protection. Then a 2-7/8" heavy-duty extruded post is pressed and hydra-formed into the base mechanically forming them together. This proprietary process allows maximum strength for a sturdy pedestal. Features: 2-7/8 in. pedestal with 9″ round base Rigid 4-keyed aluminum post, anodized finish Air-powered height adjustment Adjusts (inches) 14" to 19.5" Warranty: 5 years

2-7/8" Bushing for Seat Mount Swivel  Springfield Marine Replacement/Service Part for lost or worn bushing  Compatible With: Springfield bushings stamped with - Manufacturing Number 9010018 and Casting Number D3725 Features: Maintains a tight fit for a securely mounted boat seat Easy installation Technical Specifications: Diameter - 2-7/8" Length - 3-9/16"  *Sold as an Individual

Second Generation Posi-Lock Manual Adjust 2-7/8" Pedestal - No Swivel Non-removable pedestal system in 2-7/8 in. offers a heavy-duty base and post for today's larger and faster recreational boats. The base is permanent mold AC7A aluminum alloy with an anodized finish for maximum strength and corrosion protection. Then a 2-7/8 in. heavy-duty extruded post is pressed and hydra-formed into the base mechanically forming them together. This proprietary process allows maximum strength for a sturdy pedestal. Features: 2-3/8" inner post with 2-7/8" locking adapter, 9 in. round base Adjusts in 1-inch increments  Anodized post and base Use with 2-7/8" Trac-Lock™ slide or swivel (sold separately) Adjust from 11-7/8" to 14-3/4" Warranty: 5 years

BSHBSWR Black Stainless Steel Heavy-Duty Ball Bearing Swivel #4 - 280lb *3-Pack Black Stainless Steel Heavy-Duty Ball Bearing Swivel with Welded Rings features independent dual rotating top & bottom axis that helps eliminate line twists. The uniform welded rings add strength and performance to this saltwater ready swivel. Features: Stainless Steel Rings & Body Independent Dual Rotating Top & Bottom Axis Uniform Welded Rings Adds Strength and Performance Saltwater Ready Eliminates Line Twist

BSHBSWR Black Stainless Steel Heavy-Duty Ball Bearing Swivel #3 - 200lb *3-Pack Black Stainless Steel Heavy-Duty Ball Bearing Swivel with Welded Rings features independent dual rotating top & bottom axis that helps eliminate line twists. The uniform welded rings add strength and performance to this saltwater ready swivel. Features: Stainless Steel Rings & Body Independent Dual Rotating Top & Bottom Axis Uniform Welded Rings Adds Strength and Performance Saltwater Ready Eliminates Line Twist

BSHBSWR Black Stainless Steel Heavy-Duty Ball Bearing Swivel #1 - 110lb *3-Pack Black Stainless Steel Heavy-Duty Ball Bearing Swivel with Welded Rings features independent dual rotating top & bottom axis that helps eliminate line twists. The uniform welded rings add strength and performance to this saltwater ready swivel. Features: Stainless Steel Rings & Body Independent Dual Rotating Top & Bottom Axis Uniform Welded Rings Adds Strength and Performance Saltwater Ready Eliminates Line Twist

1-1/8" Heavy Duty PVC Bilge & Livewell Hose (FDA) - Clear with Black Helix - Sold by the Foot Trident Smooth extra heavy wall vinyl (FDA) well hose. All clear (see thru) with black helix. Excellent durability, flexibility & bend radius for XHD bilge, live well, drain, scupper lines, etc. No cuffs are required.  Features: Sold by the foot Flexible, but the 147 series is less flexible than the 149 series of hoses Application: Bilge and live well hose Specifications: Tube & Cover: Clear vinyl reinforced with black helix  Color: Clear with black helix Reinforcement: PVC Helix Temperature Range: 10°F-120°F (-12°C-49°C)  Inner Diameter: (inch) 1-1/8" / (mm) 28.6 Outer Diameter: (inch) 1.39" / (mm) 35.4 Working Pressure: (Psi Vac In./Hg) 28 Weight: (Lb./ 50 ft.) 15 / (Kg/m) 0.45 Bend Radius: (inch) 3.5" / (mm) 8.9 *Burst Pressure is 4 x Working Pressure

PED4900 PedestalPod Uncut (Usable Face = 12.5"W x 7.8"H) (31.75cm W x 19.8cm H) - Carbon Black PedestalPods are better than bracket mounting. Very sturdy and secure, yet clean and attractive, this mount provides protection of your fishfinder/chartplotter from the harshest of wet boating conditions. PedestalPods provide the convenience of easily reaching and controlling the fishfinder/chartplotter while providing added security with protection from theft. PedestalPods position your fishfinder/chartplotter at 20" off the deck and located near the bow and at the 45° angle for ease of viewing while fishing. This allows the user to easily reach and access the fishfinder/chartplotter for changes to range, zoom or even control the trolling motor. PedestalPods are manufactured with a double gasket system that provides an excellent watertight seal keeping spray off the electrical connections on the back of your fishfinder/chartplotter assuring reliability and longevity of your marine electronics. Your fishfinder/chartplotter is easily flush mounted into the pre-cut face of the NavPod. The heavy duty, powder coated aluminum pedestal tube is 3” in diameter with a 5” round base and has a large 1.75” opening providing plenty of room for running wires and connectors internally for a very clean look and provides protection for wires and electrical connectors from water intrusion, UV exposure or damage from just getting kicked or snagged and ripped out of their sockets. NavPods come with a security wrench and nickel chrome-plated stainless steel tamperproof screws for protection from theft. There are pre-cut models available for 7", 9" and 12" LCD displays from all major marine electronic manufacturers.

PP4900 PowerPod Uncut (Usable Face = 12.5"W x 7.8"H (31.75cm W x 19.8cm H) PowerPods are designed for the serious boater who is blasting offshore. He demands the most from his boat and his electronics. He needs a tough and rugged mount to protect vital electronics from the harshest of offshore boating conditions. Sturdy and secure, yet clean and attractive, PowerPods are better than bracket mounting. Over 70 Pre-Cut PowerPods are available for all popular manufacturers products. 1.8" opening in the swivel tube provides plenty of room for running wires and connectors through. PowerPods are positioned at a 20 degree tilt back viewing angle. PowerPods for Sail are for mounting on a flat surface. Perhaps under the dodger or aft end of the cockpit table especially on boats with dual wheels. Structural Rigidity The Gen3 enhancements now include a thicker gauge Acrylic Capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the Acrylic is combined with the durability of the ABS. The Acrylic cap protects the ABS from UV and it's potentially damaging effects on plastic. These NavPods are really strong! Waterproof Seal All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod. This seal provides the best protection of your Marine Electronics. NavPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future in order to service your electronics. The gasket will continue to do its job.  Nickel Chrome Plated Stainless Steel NavPod uses all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling! Commitment to Quality We are committed to producing high quality Waterproof Housings for Marine Electronics. We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods. We want you to be a NavPod customer for life and are willing to earn your trust and loyalty.

BSHBSWR Black Stainless Steel Heavy-Duty Ball Bearing Swivel #5 - 335lb *2-Pack Black Stainless Steel Heavy-Duty Ball Bearing Swivel with Welded Rings features independent dual rotating top & bottom axis that helps eliminate line twists. The uniform welded rings add strength and performance to this saltwater ready swivel. Features: Stainless Steel Rings & Body Independent Dual Rotating Top & Bottom Axis Uniform Welded Rings Adds Strength and Performance Saltwater Ready Eliminates Line Twist

BSHBSWR Black Stainless Steel Heavy-Duty Ball Bearing Swivel #2 - 160lb *3-Pack Black Stainless Steel Heavy-Duty Ball Bearing Swivel with Welded Rings features independent dual rotating top & bottom axis that helps eliminate line twists. The uniform welded rings add strength and performance to this saltwater ready swivel. Features: Stainless Steel Rings & Body Independent Dual Rotating Top & Bottom Axis Uniform Welded Rings Adds Strength and Performance Saltwater Ready Eliminates Line Twist

GP1900 SailPod Uncut (Usable Face = 12.5"W x 7.8"H) (31.8cm W x 1 9.8cm H) for 9.5" Wide Guard SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. "Where you need it...when you need it." Sail Pods are the smart solution for mounting your Radar or Chartplotter at the helm where you can easily operate and clearly see the fine details of the screen. NavPods have a high gloss finish, giving you a clean mounting solution while concealing unsightly wires. Nickel Chrome plated tamperproof screws provide a little bling and a lot of security. Designed with a double gasket waterproof seal, NavPods protect your electronics from the harshest of wet offshore boating conditions. A SailPod is best mounted on a Single Bend AngleGuard or use a Double Bend AngleGuard to fit an InstrumentPod on the top vertical section and SailPod below on the angled section. Structural Rigidity The Gen3 enhancements now include a thicker gauge Acrylic Capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the Acrylic is combined with the durability of the ABS. The Acrylic cap protects the ABS from UV and it's potentially damaging effects on plastic. These NavPods are really strong! Waterproof Seal All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod. This seal provides the best protection of your Marine Electronics. NavPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future in order to service your electronics. The gasket will continue to do its job. Nickel Chrome Plated Stainless Steel We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling! Commitment to Quality We are committed to producing high quality Waterproof Housings for Marine Electronics. We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods. We want you to be a NavPod customer for life and are willing to earn your trust and loyalty. SailPod for Power are for mounting on a SK135 Stachion Kit can be used to mount a SailPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SailPod for overhead mounting applications.

Trac-Lock Swivel/Slide Non-Locking Mount for 2-7/8" Post Trac-Lock locking slide and swivel seat mount is for a 2-7/8 in. post. Features: Travels 5-1/4″ Forward and backward with fingertip control Self-lubricated pads provide a smooth, easy glide Made of high-strength aluminum Rotates 360° Powder-coated swivel prevents corrosion Fits 2-7/8″ posts Specifications: Platform (inch): Large 7-1/4″ x 13″  *5-Year Limited Warranty

Snap Shackle - Large Swivel Bail - 73mm(2-7/8") Length Heavy duty plunger springs and precision components ensure dependable service. Body and hasp profiles are designed for easy clearance of lines and fittings when released. High strength to weight ratio. Split ring on plunger pin is spot welded for security. A lanyard can be attached to the plunger pin for easy opening. Materials: Grade 15-5PH investment cast stainless steel body and hasp Grade 316 stainless steel plunger pin and spring

Galaxy® Style 5228 8' Heavy-duty Extension Mast Constructed of high-quality Shakespeare white fiberglass, and finished to match Galaxy antennas. This 1-1/2" diameter extension mast can be used to increase height of an antenna and thus improve effective range, or to boost placement of an antenna above on-board obstructions. IMPORTANT! If the combined length of your antenna and all extensions is more than 8', users MUST use an upper support bracket Features: Reduced length version Stainless steel upper and lower ferrules with standard 1" - 14 thread Mount: A Style 409-R or 410-R Mounting Kit is required One section, actual length 95" Shakespeare Limited Warranty: 5-Years