|
Pro Splicing Kit
Kit Includes:
Ronstan splicing bag
Splicing kit, 5 fid set (4, 5.5, 7.5, 10, 13 mm)
Scissors, 8" cuts Kevlar and Dyneema material
F15 puller small, 2-4 mm line
F25 puller, 6-8 mm line
Splicing tape
5 piece needle set
Small Swedish fid
Leather palm right hand, medium
Whipping twine
Dyneema whipping twine
|
288.14 |
|
|
Standard Splicing Kit
Kit Includes:
Ronstan splicing bag
Splicing kit, 5 fid set (4, 5.5, 7.5, 10, 13mm)
Scissors, 8", cuts Kevlar and Dyneema material
F15 puller small, 2-4 mm line
F20 puller medium, 4-6 mm line
Splicing tape
5 piece needle set
Leather palm, right hand, medium
Whipping twine
|
221.48 |
|
|
Hypro 9910-Kit-1725,Kit
910-KIT1725 Includes:
Qty 2 9910-650085 Diaphragm, Desmopan (Standard)
Qty 4 9910-320030 O-Ring
Qty 1 9910-650520 Air Chamber Diaphragm (Buna)
|
124.53 |
|
|
Hypro 9910-Kit-1734, Repair Kit
|
242.32 |
|
|
Hypro 9910-Kit-1913, O'Ring Kit
|
51.11 |
|
|
Hypro 9910-Kit-1916, O'Ring Kit
9910-KIT1916 Includes:
Qty 4 9910-620030 O-Ring
Qty 1 9910-620210 O-Ring
Qty 2 9910-180101 O-Ring
Qty 1 9910-550040 O-Ring
Qty 2 9910-550350 O-Ring
Qty 4 9910-390060 O-Ring
Qty 1 9910-650542 O-Ring
Qty 1 9910-390290 O-Ring
Qty 1 9910-740290 O-Ring
|
52.20 |
|
|
Hypro 9910-Kit-1919, D50 O-Ring Kit
9910-KIT1919 Includes:
Qty 1 9910-650920 O-Ring
Qty 2 9910-180101 O-Ring
Qty 5 9910-550040 O-Ring
Qty 4 9910-320030 O-Ring
Qty 1 9910-650542 O-Ring
Qty 1 9910-390290 O-Ring
Qty 1 9910-740290 O-Ring
Qty 1 9910-550350 O-Ring
Image may not represent exact kit contents
|
44.78 |
|
|
Hypro 9910-Kit-1920 VALVE KIT FOR D50
The Hypro Valve Repair Kit 9910-KIT1920 is used to replace worn or damaged valves on the D50 Diaphragm Pump.
Includes4 complete valve assemblies and 4 O-Rings.
|
168.27 |
|
|
Hypro 9910-Kit-1990 Relief Valve for D252
This control unit, for mounting on pump model 9910-D252, is capable of handling flow rates up to 6 gpm (22.7 lpm) and pressures up to 290 psi (20 bar). It includes one adjustable relief valve, one pressure/bypass selector, 5/8" HB bypass port and 3/8" HB port.
|
127.89 |
|
|
Hypro 9910-Kit1703, D30 Kit
|
161.15 |
|
|
Hypro 9910-Kit1720, Diaphragm Pumps
|
111.06 |
|
|
Dinghy Specialist Splicing Kit
Kit Includes:
Ronstan splicing bag
Ceramic knife, 4" blade
Scissors, 1.75" cuts Kevlar and Dyneema material
F15 puller small, 2-4mm line
Splicing tape
5 piece needle set
Whipping twine
Small Swedish fid
|
155.52 |
|
|
Splicing Kit
These five Selma Fids are all you need to splice different sizes and types of rope or line.
Features:
Highly polished stainless steel
Fid sizes: 4, 5.5, 7.5, 10, and 13 mm
Splice double and hollow braided lines from 1/8" to 9/16"
Splice three-strand line or twine up to 1-1/8"
WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
66.64 |
|
|
SHURFLO PRO WASHDOWN KIT™ II Deluxe - 12 VDC - 5.0 GPM - Includes Pump, Fittings, Nozzle, Strainer, 25' Hose
SHURFLO's PRO WASHDOWN KIT II Deluxe includes everything you need for those tough applications in fish box, scaling, anchor chain cleaning and blasting down the grimiest decks all in one kit! The kit includes a washdown pump (Deluxe 4.0), fittings, nozzle, raw water strainer and a 25' coiled hose.
Features:
Replaces 4903
Sealed Switch
Sealed Motor
Corrosion Resistant Electro
Independent Chambers
Built-In Check Valve
Co-Molded Diaphragm
Self-Priming up to 6 Feet
Dry Run Capability
Thermally Protected
Ignition Protected, CE
Fittings, Nozzle, Raw Water Strainer and a 25' Blue Coiled Hose Included
|
312.58 |
|
|
SHURFLO PRO WASHDOWN KIT™ II Ultimate - 12 VDC - 5.0 GPM - Includes Pump, Fittings, Nozzle, Strainer, 25' Hose
SHURFLO's PRO WASHDOWN KIT II includes everything you need for those tough applications in fish box, scaling, anchor chain cleaning and blasting down the grimiest decks all in one kit! The kit includes a washdown pump (Ultimate 5.0), fittings, nozzle, raw water strainer and a 25' coiled hose.
Features:
Replaces 5901
Sealed Switch
Sealed Motor
Corrosion Resistant Electro
Independent Chambers
Built-In Check Valve
Co-Molded Diaphragm
Self-Priming up to 6 Feet
Dry Run Capability
Thermally Protected
Ignition Protected, CE
Fittings, Nozzle, Raw Water Strainer and a 25' Blue Coiled Hose Included
|
415.45 |
|