Pillar Fairlead for 70300 Cam Cleat This add-on enables the cam cleat to be engaged from a variety of angles. Cams can be fitted either way around to achieve a lead from in front or behind. Features: Made for Barton’s 70300 Maxi Cam Cleat Stainless steel pillars to add strength and wear resistance

Pillar Fairlead for 70200 Cam Cleat This add-on enables the cam cleat to be engaged from a variety of angles. Cams can be fitted either way around to achieve a lead from in front or behind. Features: Made for Barton’s 70200 Midi Cam Cleat Stainless steel pillars to add strength and wear resistance

Front Mounted Fairlead f/Small T-Cleat & C-Cleat Features: Easily fitted to the 'T-Cleat' and 'C-Cleat'. Allows precise cleating and release from any lead angle. Lower entry efforts for off-centre cleating. Will not catch lines or clothing. Suits small C-Cleat and T-Cleat Tough, abrasion resistant composite material

DO 550 Rope Clutch - Cam  Replacement cam for any size Barton Marine DO 550 Rope Clutch. *Sold as an Individual

Wire Fairlead with Base for 70-17 Cam Cleat Wire Cam Fairlead with Base. Works with 70-17 Cam cleat.  Does NOT include 70-17 Cam Cleat

Micro Carbo-Cam Cleat Kit with Wire Fairlead Wire fairleads maintain a low profile while holding the line close to the cleat. Kit includes lightweight, fiber-reinforced 471 Carbo Cam, and 475 wire fairlead. Specifications: Weight: 26g / 0.9oz Maximum working load: 68kg / 150lb

Size 3 Stanchion Lead Block - Single with Becket & Cam Cleat  Barton Marine's stanchion lead blocks have proven to be popular with Cruising sailors all over the World.  Mounted onto the stanchion base, the stanchion lead block enables the Genoa furling line to be led back to the cockpit for easy adjustment.  Ball bearing sheaves have a precision molded acetal sheave running on a significant diameter brass bearing, ensuring free running under the highest loads.   The unit will fully rotate about the swivel head to match your pulling angle.  Cam cleat will secure the line into place.   Block attachment to stanchion is by means of screwing together the integral Stainless Steel strap. Technical Specifications Sheave - Single Sheave Size - 1-3/4" (45mm) Maximum Rope Diameter -  3/8" (10mm) Safe Working Load - 881 lb (400 kg) Maximum Stanchion (Tube) Size - 1" (25mm)  *Sold as an Individual 

Quick Cleat - 1/4" - Pair The Barton Marine Quick Cleat range is perfect for novices and seasoned mariners and takes the place of tying and releasing knots.  Made of nylon reinforced composite and secures braided lines up to 1/4" (6 mm) with a working load limit of 66 lb (30 kg.)  Sold in pairs, the Barton Marine Quick Cleat offers exceptional value.   From securing fenders, gear, painter lines, buckets, boat gears or other gear, the Barton Marine Quick Cleat is designed to alter rope tension in one direction, but grips the rope firmly and securely in the other. Quick Cleats are easy to use.  Simply rotate the lever on top of the cleat, insert the line and release the lever which secures the rope.  Quick Cleats are designed to alter rope tension in one direction but grip the rope firmly and securely in the other.   Features: Dupont Zytel Construction Easy to install Technical Specifications: Material - Zytel nylon Working Load - 66 lb (30 kg) Maximum Rope Diameter - 1/4" (6 mm) Height - 1-1/16" (2.7 cm) Weight - 2.3 oz (65 g) *Sold as a Pair

Kevlar Cam Cleat Maxi Manufactured from a composite Kevlar/Zytal material. This advanced material offers performance advantages over carbon fiber and conventional glass-reinforced resins; 'K' cams are solid, lightweight, and have excellent wear resistance. A progressive tooth design ensures maximum holding power on all types of lines, while maintaining minimum wear to both cam and line. Specifications: Max Line Ø: 10mm - 14mm(0.4" - 0.55") FasteningsØ: 5mm (0.20") Fastenings Center: 50mm (1.97") Holding Power: 260kg (573.20lbs) Weight: 50kg (110.23lbs)

Kevlar Cam Cleat Midi Manufactured from a composite Kevlar/Zytal material, this advanced material offers performance advantages over carbon fiber and conventional glass-reinforced resins; 'K' cams are very strong, lightweight, and have excellent wear resistance. A progressive tooth design ensures maximum holding power on all types of lines while maintaining minimum wear to both cam and line. Specifications: Max Line Ø: 6 mm - 12 mm (0.4 - 0.55 inches) Fastenings Ø: 5 mm (0.20 in.) Fastenings Center: 40 mm (1.57 in.) Holding Power: 230 kg (507.1 lbs) Weight: 34 kg (74.96 lbs)

Quick Cleat - 5/16" - White The Barton Marine Quick Cleat range is perfect for novices and seasoned mariners and takes the place of tying and releasing knots.  Made of nylon reinforced composite and secures braided lines up to 5/16" (10 mm) with a working load limit of 154 lb (70 kg.)  The Barton Marine Quick Cleat offers exceptional value.  From securing fenders, gear, painter lines, buckets, boat gears or other gear, the Quick Cleat is designed to alter rope tension in one direction, but grips the rope firmly and securely in the other. Quick Cleats are easy to use.  Simply rotate the lever on top of the cleat, insert the line and release the lever which secures the rope.   Features: Dupont Zytel Construction Easy to install Technical Specifications: Color - White Material - Zytel nylon Working Load - 154 lb (70 kg) Maximum Rope Diameter - 5/16" (10 mm) Height - 1-1/16" (2.7 cm) Weight - 2 oz (55 g) *Sold as an Individual 

Quick Cleat - 5/16" - Black  The Barton Marine Quick Cleat range is perfect for novices and seasoned mariners and takes the place of tying and releasing knots.  Made of nylon reinforced composite and secures braided lines up to 5/16" (10 mm) with a working load limit of 154 lb (70 kg.)  The Barton Marine Quick Cleat offers exceptional value.  From securing fenders, gear, painter lines, buckets, boat gears or other gear, the Quick Cleat is designed to alter rope tension in one direction, but grips the rope firmly and securely in the other. Quick Cleats are easy to use.  Simply rotate the lever on top of the cleat, insert the line and release the lever which secures the rope.   Features: Dupont Zytel Construction Easy to install Technical Specifications: Color - Black Material - Zytel nylon Working Load - 154 lb (70 kg) Maximum Rope Diameter - 5/16" (10 mm) Height - 1-1/16" (2.7 cm) Weight - 2 oz (55 g) *Sold as an Individual 

C-Cleat Cam Cleat - Medium - Grey w/Grey Base 3-12mm(1/8" - 1/2") Rope Diameter Intensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and releasing of control lines in every application and load condition. Through the use of advanced composites, these cleats achieve superior performance while overcoming the limitations of metal alloys. Ronstan cam cleats are strong, light and corrosion free. The unique tooth profile and cam geometry are designed to grip without damaging the rope. A multi-coil spring recessed in the upper part of the cam generates near constant torque. This constant torque ensures secure cleating of even the smallest lines with minimal abrasion or rope wear and low line entry and exit efforts. The lightweight ultra rigid carbon fiber composite cams of the c-cleat are corrosion free, suffer virtually no tooth wear and are non rope abrasive. Features: Design, materials selection and advanced manufacturing methods combine to deliver superior strength and holding power, light weight and corrosion resistance Cam profile and multi-coil spring minimise line entry and release effort Carbon fiber compoasite cam material provides maximum resistance to heat and abrasion Unique self-cleaning, self-lubricating slotted bearings ensure consistent high performance even when subjected to high static loads Applications: Range of cleats for all requirements including control lines, jib sheet and mainsheet cleating Materials: Carbon fiber composite cams Long strand glass fiber reinforced polymer base PTFE impregnated Acetal slotted bearing Stainless steel multi-coil spring

C-Cleat Cam Cleat - Small - Black w/Black Base 2-8mm(3/32" - 5/16") Rope Diameter Intensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and releasing of control lines in every application and load condition. Through the use of advanced composites, these cleats achieve superior performance while overcoming the limitations of metal alloys. Ronstan cam cleats are strong, light and corrosion free. The unique tooth profile and cam geometry are designed to grip without damaging the rope. A multi-coil spring recessed in the upper part of the cam generates near constant torque. This constant torque ensures secure cleating of even the smallest lines with minimal abrasion or rope wear and low line entry and exit efforts. The lightweight ultra rigid carbon fiber composite cams of the c-cleat are corrosion free, suffer virtually no tooth wear and are non rope abrasive. Features: Design, materials selection and advanced manufacturing methods combine to deliver superior strength and holding power, light weight and corrosion resistance Cam profile and multi-coil spring minimise line entry and release effort Carbon fiber compoasite cam material provides maximum resistance to heat and abrasion Unique self-cleaning, self-lubricating slotted bearings ensure consistent high performance even when subjected to high static loads Applications: Range of cleats for all requirements including control lines, jib sheet and mainsheet cleating Materials: Carbon fiber composite cams Long strand glass fiber reinforced polymer base PTFE impregnated Acetal slotted bearing Stainless steel multi-coil spring

C-Cleat Cam Cleat - Medium - Black w/Black Base 3-12mm(1/8" - 1/2") Rope Diameter Intensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and releasing of control lines in every application and load condition. Through the use of advanced composites, these cleats achieve superior performance while overcoming the limitations of metal alloys. Ronstan cam cleats are strong, light and corrosion free. The unique tooth profile and cam geometry are designed to grip without damaging the rope. A multi-coil spring recessed in the upper part of the cam generates near constant torque. This constant torque ensures secure cleating of even the smallest lines with minimal abrasion or rope wear and low line entry and exit efforts. The lightweight ultra rigid carbon fiber composite cams of the c-cleat are corrosion free, suffer virtually no tooth wear and are non rope abrasive. Features: Design, materials selection and advanced manufacturing methods combine to deliver superior strength and holding power, light weight and corrosion resistance Cam profile and multi-coil spring minimise line entry and release effort Carbon fiber compoasite cam material provides maximum resistance to heat and abrasion Unique self-cleaning, self-lubricating slotted bearings ensure consistent high performance even when subjected to high static loads Applications: Range of cleats for all requirements including control lines, jib sheet and mainsheet cleating Materials: Carbon fiber composite cams Long strand glass fiber reinforced polymer base PTFE impregnated Acetal slotted bearing Stainless steel multi-coil spring