"Captain Hook" Chain Snubber Small Snubber Hook Only (5/16" T-316 Stainless Steel Stock) The "Captain Hook" Chain Snubber can be used in a few different ways: Use the claw and attached line to relieve tension from your windlass while anchored by snubbing the chain overboard and tying off the line to a cleat or samson post on deck Use the snubber on deck for security to hold the chain in your anchor roller and tie off on a cleat while underway for peace of mind Relieve the tension on the windlass (like in 1) by attaching the snubber to the chain in the anchor roller and pulling back and tying it off securely All T-316 stainless. Version with 3-strand nylon line includes professional eye splice. Note: Always keep the bitter end of the anchor chain secure in the windlass while using the chain snubber.

"Captain Hook" Chain Snubber Large Snubber Hook Only (1/2" T-316 Stainless Steel Stock) The "Captain Hook" Chain Snubber can be used in a few different ways: Use the claw and attached line to relieve tension from your windlass while anchored by snubbing the chain overboard and tying off the line to a cleat or samson post on deck Use the snubber on deck for security to hold the chain in your anchor roller and tie off on a cleat while underway for peace of mind Relieve the tension on the windlass (like in 1) by attaching the snubber to the chain in the anchor roller and pulling back and tying it off securely All T-316 stainless. Version with 3-strand nylon line includes professional eye splice. Note: Always keep the bitter end of the anchor chain secure in the windlass while using the chain snubber.

"Captain Hook" Chain Snubber Small Snubber Hook for 1/4" & 5/16" Chain with 12' of 1/2" 3 Strand Nylon The "Captain Hook" Chain Snubber can be used in a few different ways: Use the claw and attached line to relieve tension from your windlass while anchored by snubbing the chain overboard and tying off the line to a cleat or samson post on deck Use the snubber on deck for security to hold the chain in your anchor roller and tie off on a cleat while underway for peace of mind Relieve the tension on the windlass (like in 1) by attaching the snubber to the chain in the anchor roller and pulling back and tying it off securely All T-316 stainless. Version with 3-strand nylon line includes professional eye splice. Note: Always keep the bitter end of the anchor chain secure in the windlass while using the chain snubber.

"Captain Hook" Chain Snubber Large Snubber Hook for 3/8" & 1/2" Chain with 15' of 5/8" 3 Strand Nylon The "Captain Hook" Chain Snubber can be used in a few different ways: Use the claw and attached line to relieve tension from your windlass while anchored by snubbing the chain overboard and tying off the line to a cleat or samson post on deck Use the snubber on deck for security to hold the chain in your anchor roller and tie off on a cleat while underway for peace of mind Relieve the tension on the windlass (like in 1) by attaching the snubber to the chain in the anchor roller and pulling back and tying it off securely All T-316 stainless. Version with 3-strand nylon line includes professional eye splice. Note: Always keep the bitter end of the anchor chain secure in the windlass while using the chain snubber.

Hinged Pad Eye- 1/4" C. Sherman Johnson Pad Eyes fold flat when not in use. The eye gives with the load unlike rigid pad eyes; material reducing the load on the fastenings. A friction drag insures that the eye stays in position and is rattle free.  Specifications: T-316 Stainless Steel construction Supplied with backing plate

Hinged Pad Eye- 5/16" C. Sherman Johnson Pad Eyes fold flat when not in use. The eye gives with the load unlike rigid pad eyes; material reducing the load on the fastenings. A friction drag insures that the eye stays in position and is rattle free.  Specifications: T-316 Stainless Steel construction Supplied with backing plate

Hinged Pad Eye- 3/8" C. Sherman Johnson Pad Eyes fold flat when not in use. The eye gives with the load unlike rigid pad eyes; material reducing the load on the fastenings. A friction drag insures that the eye stays in position and is rattle free.  Specifications: T-316 Stainless Steel construction Supplied with backing plate

Spring Loaded Cleat Can be installed horizontally or vertically Holds fenders, when open and is only 5/8" high when closed Requires (3) 3/16" fasteners Hole:3/4" Diameter: 1-7/8" Fits Rope: Up to 1/2" Height:Open 1-1/4", Closed 5/8" Material: 316 Stainless Steel

Hawse Pipe - 316 Stainless Steel - 4" x 2" 316 S.S. Hawse Pipe Interior Hole: 4" x 2" Pipe Depth: 1-1/8" Flange: 6-1/2" x 3-3/8" Fastener: #10 (3) Weight: 21.5 oz. Material: 316 Stainless Steel Fastener: #10 (4)

C. SHERMAN JOHNSON   Johnson offers cable and wire fittings in 16th" to 3/8" sizes in type 316 stainless steel for machine swage, Hand Crimp, mechanical termination and splice termination. You can find cable railing hardware and Terminal Tuner, Classic, Decko, Smooth Line, Terminator and Threaded Terminal Turnbuckles to accent the look of any cable system.

Single-Hook Anchor Chain Tensioner for 5/16" Chain These fittings will securely tension and hold the anchor in the bow roller channel.  They will free up use of the bow cleat and prepare the anchor for sea condition assuring you peace of mind.  This fitting is not designed to take the strain of the rode of a boat at anchor.  "Single Hook" style has overall length of 12", the threaded hook has 1-1/2" of adjustment for ease of installation.

Over Center Gate Hook with Splice Eye *Dyneema Line not included with fittings C. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line fittings. The Splice Line fittings are designed to be light weight and easy on the line. Both US Sailing and ISAF now allow Dyneema/ Spectra life lines for offshore racing and Dyneema/ Spectra is also a great product for the cruising sailor that wants to replace their stainless steel life line cables. Professional splicing recommended.

Mini Gate Hook with Splice Eye *Dyneema Line not included with fittings C. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line fittings. The Splice Line fittings are designed to be light weight and easy on the line. Both US Sailing and ISAF now allow Dyneema/ Spectra life lines for offshore racing and Dyneema/ Spectra is also a great product for the cruising sailor that wants to replace their stainless steel life line cables. Professional splicing recommended.

Splice Line Small Boat Kit for Boats up to 30' C. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line fittings. The Splice Line fittings are designed to be light weight and easy on the line. Both US Sailing and ISAF now allow Dyneema/ Spectra life lines for offshore racing and Dyneema/ Spectra is also a great product for the cruising sailor that wants to replace their stainless steel life line cables. Professional splicing recommended. These kits include everything needed to install upper Dyneema life lines without gates. For double life lines, buy 2 kits. For adding a gate, use the C. Sherman Johnson Gate Kits.  Specifications: 2 x LS-3600 Toggle Jaw w/ Splice Eye 2 x LS-2900 Tubular Turnbuckle w/ Splice Eye 70' Grey 1/4" (6mm) Dyneema Splicing and Install Instructions Fid/Needle/Twine

Splice Line Gate Kit - Midship for One Side C. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line fittings. The Splice Line fittings are designed to be light weight and easy on the line. Both US Sailing and ISAF now allow Dyneema/ Spectra life lines for offshore racing and Dyneema/ Spectra is also a great product for the cruising sailor that wants to replace their stainless steel life line cables. Professional splicing recommended. These kits include everything needed to install upper Dyneema life lines without gates. For double life lines, buy 2 kits. For adding a gate, use the C. Sherman Johnson Gate Kits.  Specifications: 1 x LS-3100 Over Center Gate Hook w/ Splice Eye 1 x LS-3200 Splice Eye to Splice Eye Fitting 1 x LS-3300 Gate Eye to Splice Eye Fitting 1 x LS-3400 Adjuster w/ Splice Eye 6' Dyneema