EZ-Roll'r™ Cradle with Ball for Apple iPad mini 1-3 The RAM-B-202-AP14U consists of a 2.5" round base adapter, with 1" ball, attached to a high strength composite cradle. The cradle includes a patent pending roller design allows for smooth placement and removal of the iPad, while keeping it secure while on the go. Compatible and interchangeable with a wide range of popular RAM Mounting products, this cradle is ready to compliment your iPad and become the most useful accessory in your vehicle.  Features: Material: High Strength Composite & Powder Coated Marine Grade Aluminum Ball Size: B Size 1" Rubber Ball Note: The "U" in the part number reflects product packaged in poly bag Weight: 0.4 lbs.

Tab-Lock™ Locking Cradle f/Apple iPad mini 1-3 with Case, Skin & Sleeve The RAM-HOL-TABL12U consists of a spring loaded backplate, custom support cups and locking mechanism for the iPad mini WITH skin, sleeve or case. This spring loaded design makes it easy to load and unload your iPad mini, along with keeping it secure while on the go. Cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your iPad mini can be used just as it was intended. Quickly lock the cradle, keeping your iPad mini secure and safe from theft. Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern. The included back plate is interchangeable with various size support cups, making it compatible with numerous tablet models. New detachable support cups are the only components needed for purchase, attach to the back plate for support of your new tablet. The Tab-Lock™ cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size. Cradle Dimensions: Height: 6.75" to 8.75" Width: 5.06" to 5.68" Depth: 0.13" to 1" Note: Product consists of holder only. Case not included. Features: 1. Locking mechanism for theft deterrence 2. Support cups contain open slots to accommodate for tablets of various sizes 3. Back plate can support various size support cups 4. Spring loaded tension provides secure support for your tablet 5. Spring loaded cradle allows for quick release of your tablet 6. High strength materials maximize longevity of cradle 7. Full access to all ports 8. Lifetime warranty Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag. The RAM-HOL-TABL12U is not compatible with the iPad mini 1-3 with LifeProof case. Weight: 1.15 lbs.

GDS® Vehicle Dock for Apple iPad mini 2 & 3 The RAM® vehicle dock with GDS Technology™ is a spring loaded, quick release cradle that offers a secure fit with easy access to the mounted tablet. This docking station is compatible with the Apple Ipad Mini 2/3 with IntelliSkin®. The integrated GDS Technology™ platform enables data and charging capabilities to the mounted tablet. Without the need to remove the IntelliSkin from the device, the user can quickly and efficiently mount the device in the vehicle dock and keep the device charged. Compatible Devices: Apple iPad mini 2 with IntelliSkin® Apple iPad mini 3 with IntelliSkin® Note: This version of the GDS® vehicle dock is not recommended for light, medium or heavy duty commercial vehicles. For these use cases, please use the RAM-GDS-DOCKL-V2-AP2U. Features: GDS Technology™ offers a universal charging platform for any device wrapped in IntelliSkin® Modular design makes upgrading to a new tablet simple and cost effective Dual-spring loaded tension provides secure support for your tablet Easy, quick release of your tablet for on-the-go applications Versatility of holder allows for attachment to many RAM mounting solutions Lifetime warranty, 3 year on electronics Made in U.S.A. Specifications: Max power: 5V-12V @ 2A* Material: High Strength Composite *mUSB products supporting USB 2.0/3.0 will have a max current of 1.5A

EZ-Roll'r Cradle for Apple iPad Mini 4 The RAM® EZ-Roll'r cradle for the Apple iPad mini 4 is the most cost effective and simple way to secure the iPad mini 4 in a variety of applications. The RAM-HOL-AP20U consists of a high strength composite cradle and patent pending roller design. The patent pending roller design allows for smooth placement and removal of the iPad, while keeping it secure while on the go. Compatible and interchangeable with a wide range of popular RAM Mounting products, this cradle is ready to compliment your iPad and become the most useful accessory in your vehicle. Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern. Cradle Features: Compatible with various iPad cable/docking accessories Patent pending roller design for super smooth placement and removal of the iPad High strength materials maximize longevity of cradle Full access to all ports Lifetime warranty Material: High Strength Composite Note: This product is NOT recommended for devices with a Tech Armore Glass Screen Protector. The "U" in the part number reflects product packaged in poly bag.

EZ-Roll'r™ Cradle for Apple iPad Pro 11" The RAM® EZ-Roll’r™ cradle for the iPad Pro 11” secures your device in a form-fit holder while keeping the entire screen visible. Simply slide your iPad into the cradle and roll the top clip over the device to secure into place. The side buttons, camera, and charging port are conveniently exposed and accessible. This RAM® EZ-Roll’r™cradle also features three attachment points on the back to attach a RAM® round ball base. An attachment point on the side of the cradle allows for the placement and removal of the Apple Pencil.  Features: Compatible with various iPad cable/docking accessories Roller design for super smooth placement and removal of the iPad Pro High strength materials maximize longevity of cradle Full access to all ports and buttons Lifetime warranty Specifications: Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag

RAM® EZ-Roll'r™ Cradle for Apple iPad mini 6 The RAM® EZ-Roll’r™ cradle for the iPad mini 6 secures your device in a form-fit holder while keeping the entire screen visible. Simply slide your iPad into the cradle and roll the top clip over the device to secure it into place. The side buttons, camera, and charging port are conveniently exposed and accessible. This RAM® EZ-Roll’r™ cradle also features two attachment points on the back to attach a RAM® round ball base. An attachment point on the side of the cradle allows for the placement and removal of the Apple Pencil. Features: Form-fit cradle for iPad mini 6 provides a perfect fit for your device without a case Compatible with B and C size RAM® round ball bases for attaching a double socket arm; ball and socket technology allows for near-infinite adjustability Made of high-strength composites for durability and reliability in the most demanding environments Lifetime warranty Specifications: Hardware Included: (4) #8-32 x 5/8" Machine Screws, (4) #8-32 Nylock Nuts  Hole Pattern: 4-Hole AMPS: 1.181" x 1.496" Materials: High strength composite Weight: 0.25lbs

EZ-Roll’r™ Cradle for the Apple iPad Pro 12.9" The RAM® Mounts EZ-Roll’r™ cradle for the iPad Pro secures your device in a form-fit holder that keeps the entire screen visible. Designed for tablets that are not in a case, the EZ-Roll’r for the iPad Pro features a holder for the Apple Pencil as well. Simply slide the tablet into the bottom cups and then roll the top clip over the top of the device to anchor it into the cradle. Side buttons, charging port and camera lens are conveniently exposed and accessible while in the EZ-Roll'r™ cradle. Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern. Features: Compatible with various iPad cable/docking accessories Patented roller design for super smooth placement and removal of the iPad Pro High strength materials maximize longevity of cradle Full access to all ports Holder for Apple Pencil built into the side of the cradle Lifetime warranty Made in U.S.A. Material: High Strength Composite Note: This product is NOT recommended for devices with a Tech Armor Glass Screen Protector. The "U" in the part number reflects product packaged in poly bag. Weight: 0.7 lbs.

RAM EZ-ROLL'R Cradle f/Apple iPad mini WITHOUT CASE, SKIN OR SLEEVE The EZ-ROLL'R consists of a high strength composite cradle and patent pending roller design. The patent pending roller design allows for smooth placement and removal of the iPad, while keeping it secure while on the go. Compatible and interchangeable with a wide range of popular RAM Mounting products, this cradle is ready to compliment your iPad and become the most useful accessory in your vehicle. The EZ-ROLL'R cradle is compatible with the following tablets: Apple iPad mini WITHOUT CASE, SKIN OR SLEEVE Specifications: Docking Cradle: No Locking Cradle: No Fits Tablets WITH Cases: No Fits Tablets WITHOUT Cases: Yes Low Vibration Environment: Yes High Vibration Environment: Yes Cradle Features: 1. Compatible with various iPad cable/docking accessories 2. Patent pending roller design for super smooth placement and removal of the iPad 3. High strength materials maximize longevity of cradle 4. Full access to all ports 5. Lifetime warranty Material: High Strength Composite

EZ-Roll’r™ Cradle for the Apple iPad Pro 10.5 The RAM® Mounts EZ-Roll’r™ cradle for the iPad Pro 10.5 secures your device in a form-fit holder that keeps the entire screen visible. Simply slide your iPad into the bottom cups and then roll the top clip over the top of the device to anchor it into the cradle. The side buttons, camera and charging port are conveniently exposed and accessible. Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern. Features: Compatible with various iPad cable/docking accessories Patented roller design for super smooth placement and removal of the iPad Pro High strength materials maximize longevity of cradle Full access to all ports Lifetime warranty Made in U.S.A. Material: High Strength Composite Note: This product is NOT recommended for devices with a Tech Armor Glass Screen Protector. The "U" in the part number reflects product packaged in poly bag.

RAM Suction Cup Mount w/iPad mini EZ-ROLL'R Cradle The EZ-ROLL'R consists of a high strength composite cradle and patent pending roller design. The patent pending roller design allows for smooth placement and removal of the iPad, while keeping it secure while on the go. Compatible and interchangeable with a wide range of popular RAM Mounting products, this cradle is ready to compliment your iPad and become the most useful accessory in your vehicle. The EZ-ROLL'R cradle is compatible with the following tablets: Apple iPad mini WITHOUT CASE, SKIN OR SLEEVE Specifications: Docking Cradle: No Locking Cradle: No Fits Tablets WITH Cases: No Fits Tablets WITHOUT Cases: Yes Low Vibration Environment: Yes High Vibration Environment: Yes Cradle Features: 1. Compatible with various iPad cable/docking accessories 2. Patent pending roller design for super smooth placement and removal of the iPad 3. High strength materials maximize longevity of cradle 4. Full access to all ports 5. Lifetime warranty Material: High Strength Composite Suction Cup Mount Features: Double socket arm, 3.25" suction cup twist lock base and round base adapter that contains the universal AMPs hole pattern. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The hole pattern found on the round base adapter will connect to many RAM cradles. The suction cup base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks.

RAM Yoke Clamp Mount w/iPad mini EZ-ROLL'R Cradle The EZ-ROLL'R consists of a high strength composite cradle and patent pending roller design. The patent pending roller design allows for smooth placement and removal of the iPad, while keeping it secure while on the go. Compatible and interchangeable with a wide range of popular RAM Mounting products, this cradle is ready to compliment your iPad and become the most useful accessory in your vehicle. The EZ-ROLL'R cradle is compatible with the following tablets: Apple iPad mini WITHOUT CASE, SKIN OR SLEEVE Specifications: Docking Cradle: No Locking Cradle: No Fits Tablets WITH Cases: No Fits Tablets WITHOUT Cases: Yes Low Vibration Environment: Yes High Vibration Environment: Yes Cradle Features: 1. Compatible with various iPad cable/docking accessories 2. Patent pending roller design for super smooth placement and removal of the iPad 3. High strength materials maximize longevity of cradle 4. Full access to all ports 5. Lifetime warranty Material: High Strength Composite Yoke Clamp Mount Features: Consists of a double socket arm, round 2.5" base that contains the universal AMPs hole pattern and yoke clamp base. The clamp base will accommodate rails in diameter from 0.625" to 1.25". The 1" rubber ball is at a right angle to the plane of the mount so when connected to a rail, the ball sits parallel to the rail. This mount is designed to be a universal mounting solution for both RAM and non-RAM designed products.

EZ-Roll'r Cradle for Apple iPad Pro 12.9" 3rd Gen  The RAM® EZ-Roll’r™ cradle for the iPad Pro 12.9” 3rd Gen secures your device in a form-fit holder while keeping the entire screen visible. Simply slide your iPad into the cradle and roll the top clip over the device to secure into place. The side buttons, camera, and charging port are conveniently exposed and accessible. This RAM® EZ-Roll’r™cradle also features three attachment points on the back to attach a RAM® round ball base. An attachment point on the side of the cradle allows for the placement and removal of the Apple Pencil.  Features: 1. Compatible with various iPad cable/docking accessories 2. Roller design for super smooth placement and removal of the iPad Pro 3. High strength materials maximize longevity of cradle 4. Full access to all ports and buttons 5. Lifetime warranty Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag.

RAM® EZ-Roll'r™ Cradle for Apple iPad 7th Gen The RAM® EZ-Roll’r™ cradle for the iPad (7th generation) secures your device in a form-fit holder while keeping the entire screen visible. Simply slide your iPad into the cradle and roll the top clip over the device to secure into place. The side buttons, camera, and charging port are conveniently exposed and accessible. This RAM® EZ-Roll’r™ cradle also features attachment points on the back to attach a RAM® round ball base. An attachment point on the side of the cradle allows for the placement and removal of the Apple Pencil (1st generation).  Features: Form-fit cradle for the iPad 7th Gen provides a perfect fit for your device without a case Compatible with B and C size RAM® round ball bases for attaching a double socket arm; ball and socket technology allows for near-infinite adjustability Made of high-strength composites for durability and reliability in the most demanding environments Lifetime warranty Materials: High strength composite Hole pattern: 4-Hole AMPS: 1.181" x 1.496" Hardware Included: (4) #8-32 x 5/8" Machine Screws (4) #8-32 Nylock Nuts

RAM® Twist-Lock™ Suction Cup Mount for Apple iPad mini 4 & 5  Ideal for aircraft windshields, the RAM® EZ-Roll'r™ cradle is designed specifically for a caseless Apple iPad mini 4 and iPad mini 5 consisting of a 3.3" diameter RAM® Twist-Lock™ suction cup base and medium-length double socket arm. The mount is designed with a RAM® 1" diameter B size patented rubber ball and socket system that has adjustment points at both ends of the double socket arm, allowing for almost infinite adjustment and perfect viewing angles.  Features: RAM® EZ-Roll'r™ cradle specifically designed for a caseless Apple iPad mini 4 and iPad mini 5 Includes RAM® Twist-Lock™ suction cup base for mounting to windshields and other nonporous surfaces as well as a B-size medium socket arm Made of powder-coated, marine-grade aluminum and high-strength composites for durability and reliability in the most demanding environments Backed by a lifetime warranty Specifications: Hardware Included: Assembly Hardware Suction Size: 3.3" Diameter Socket to Socket Length: 3" Ball Size: B Size (1") Weight Capacity: Standard Use: 2lbs/Heavy Duty Use: 1lb Materials: Marine-grade aluminum, high-strength composite Weight: 0.87lb Compatibility: Apple iPad mini 4 Apple iPad mini 5

EZ-Roll'r™ Cradle for SPOT X™ The form-fitting, high-strength composite RAM® EZ-Roll’r™ cradle for the SPOT X™ allows for the attachment of RAM® components containing the universal AMPS hole pattern. With the device in the cradle, all buttons and the power port remain fully accessible. The RAM® EZ-Roll’r™ cradle for the SPOT X™ is compatible and interchangeable with a wide range of RAM® diamond ball bases. Included is a set of two nuts and bolts.  Features: Open access to all electronic ports Patented roller design for super smooth placement and removal of the SPOT X™ Form fitted cradle supports and protects device without vibration High strength materials ensure product longevity Lifetime warranty Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag.