|
Ram Mounts
Looking for all the Ram Mount products we carry them. You can find them all right here in our Ram Mount Store Aqua Box Mount section. With everything from camera mounts to vehicle mounts including cell phone mounts, you will have plenty of choices to consider and options to choose from. Ram Mounting Systems is a quality manufacturer of all kinds of different mounts for your watercraft. You can get cell phone mounts and drink cup mounts here, along with GPS mounts and fishing rod holders. There are even iPad/iPhone/iPod mounts so you do not have to worry about having your electronics safe but close at hand.
If you have a kayak we have kayak mounts, too, and you can even do some work or surf the internet with laptop mounts to choose from. Of course, you want to make sure you choose a good marine electronics mount for your equipment, so you do not risk losing anything vital. Tablet mounts, swing arm mounts, surface mounts, and suction cup mounts are all available, and we have seat mounts, as well. You can even choose from motorcycle mounts, and rail/handle bar mounts to ensure you have everything you need your all of your future adventures.
|
|
|
RAM® Torque™ 3/4" - 1" Diameter Handlebar/Rail Base with 1" Ball, SHORT Arm and Level Cup™
Take your drink on the road with the new RAM® Torque™ handlebar and rail mounting base. We’ve paired a B-sized 1" ball base that accommodate bars 3/4" to 1" in diameter with a B-sized short length arm and Level Cup™ Drink Holder & Koozie.
Mounting Base Dimensions:
Accommodates rails 3/4" to 1" in diameter
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
|
53.48 |
|
|
RAM® Torque™ 3/4" - 1" Diameter Handlebar/Rail Base with 1" Ball, SHORT Arm and GoPro®/Action Camera Mount
The RAM® Torque™ handlebar and rail mounting base has a 1” rubber ball and accommodates bars 3/4” to 1” in diameter. Sizing inserts are included to provide a snug fit and protection of the rail. The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments. Included is a short double socket arm and a GoPro/Action Camera mount.
Mounting Base Dimensions:
Accommodates rails 3/4" to 1" in diameter
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
|
40.12 |
|
|
D Size 2.25" Ball Mount with 2 - 3.68" Round Plate & Medium Length Double Socket Arm
The RAM-D-101U consists of (2 qty) 3.68" diameter round bases and STANDARD length double socket arm. The 3.68" diameter round bases have pre-drilled holes, including two holes at 180 degrees and three holes at 120 degrees. Designed into the mount is a 2.25" diameter rubber ball and socket system with adjustment points at both socket ends of the arm.
Weight Capacity:
Up to 15 lbs.
Ball Size:
2.25" Rubber Ball Size
Material:
Powder Coated Marine Grade Aluminum
Note:
The "U" in the part number reflects product packaged in poly bag.
Weight:
3.95 lbs.
|
124.86 |
|
|
RAM® Torque™ 3/4" - 1" Diameter Handlebar/Rail Base with 1" Ball, SHORT Arm and Diamond Plate
Take your mobile entertainment on the road with the new RAM® Torque™ handlebar and rail mounting base. We’ve paired a B-sized 1" ball base that accommodate bars 3/4" to 1" in diameter with a B-sized short length arm and diamond base so that you can connect any of the RAM Mounts cradles or anything else with the AMPS hole pattern. Sizing inserts are included to provide a snug fit and offer additional protection for the rail. The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments. This low-profile mount is the perfect way to secure your personal electronics and small accessories in any high-vibration environment.
Mounting Base Dimensions:
Accommodates rails 3/4" to 1" in diameter
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
|
36.97 |
|
|
Two Pole Side Mount Rod Storage Rack - White
These Two Pole Side Mount Rod Holder are constructed from one-piece of injection molded UV stabilized polypropylene. No assembly required, easy installation. Built-in knife and lure holder. Accommodates rods up to 1-3/4” in diameter. 325028-1 and 325029-1 include four #8 stainless steel mounting screws.
|
15.84 |
|
|
Two Pole Side Mount Rod Storage Rack - Black
These Two Pole Side Mount Rod Holder are constructed from one-piece of injection molded UV stabilized polypropylene. No assembly required, easy installation. Built-in knife and lure holder. Accommodates rods up to 1-3/4” in diameter. 325028-1 and 325029-1 include four #8 stainless steel mounting screws.
|
15.84 |
|
|
RAM® Torque™ 3/4" - 1" Diameter Handlebar/Rail Base with 1" Ball, Medium Arm and Diamond Ball Base
Take your mobile entertainment on the road with the new RAM® Torque™ handlebar and rail mounting base. We’ve paired a B-sized 1" ball base that accommodate bars 3/4" to 1" in diameter with a B-sized standard length arm and diamond base so that you can connect any of the RAM Mounts cradles or anything else with the AMPS hole pattern. Sizing inserts are included to provide a snug fit and offer additional protection for the rail. The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments. This low-profile mount is the perfect way to secure your personal electronics and small accessories in any high-vibration environment.
Mounting Base Dimensions:
Accommodates rails 3/4" to 1" in diameter
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
|
38.38 |
|
|
Plastic White Thru-Hull With Strainer - 3/4" Inner Diameter
The Thru-Hull Connector with Strainer prevents clogging of the aerator pump. Also, the strainer attaches to threads that extend beyond the external retaining nut.
Specifications:
Hose Size: (inch) 3/4" inner diameter
Max Hull Thickness: (inch) 1-7/16"
Installation Hole Size: (inch) 1-1/16" to 1-1/8"
Construction: Acetal
*Do not use the strainer as a thru-hull connector nut replacement
|
12.74 |
|
|
RAM® Torque™ 3/4" - 1" Diameter Handlebar/Rail Base with 1" Ball, Short Arm and X-Grip® for Phones
We’ve paired a B-sized 1” rubber ball base that accommodates bars 3/4" - 1" in diameter with the dynamic X-Grip®. Sizing inserts are included to provide a snug fit and offer additional protection for the rail. The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments. This low-profile mount is the perfect way to secure your personal electronics and small accessories in any high-vibration environment.
The included X-Grip® cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your cell phone. The perfect complement to the modern sleek interior of today's vehicles, the RAM X-Grip® is the cell phone cradle evolved. The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.
Mounting Base Dimensions:
Accommodates rails 3/4" to 1" in diameter
Cradle Dimensions
Minimum Width = 1.875" (Minimum Height = 4.25")
Maximum Width = 3.25" (Minimum Height = 2.25")
Depth = 0.875"
Features:
1. Rustproof
2. High strength composite and stainless steel construction
3. Spring loaded cradle expands and contracts for perfect fit of your device
4. Rubber coated tips will hold device firm and stable
5. Socket technology allows for multiple adjustment angles and articulation of device
6. Includes Tether for open cockpit and extreme environments
7. Lifetime warranty
8. Made in U.S.A.
Material:
Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
|
57.13 |
|
|
RAM® Torque™ 3/4" - 1" Diameter Handlebar/Rail Base with 1" Ball, Medium Arm and X-Grip® for Larger Phones
Take your mobile entertainment on the road with the new RAM® Torque™ handlebar and rail mounting base. We’ve paired a B-sized 1” rubber ball base that accommodates bars 3/4” – 1” in diameter with a B-sized standard length arm the dynamic X-Grip® for larger phones. Sizing inserts are included to provide a snug fit and offer additional protection for the rail. The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments. This low-profile mount is the perfect way to secure your personal electronics and small accessories in any high-vibration environment.
The included X-Grip® cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your cell phone. The perfect complement to the modern sleek interior of today's vehicles, the RAM X-Grip® is the cell phone cradle evolved. The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.
Mounting Base Dimensions:
Accommodates rails 3/4" to 1" in diameter
Cradle Dimensions
Minimum Width = 1.75" (Minimum Height = 5.5")
Maximum Width = 4.5" (Minimum Height = 3.25")
Depth = 0.875"
Features:
1. Rustproof
2. High strength composite and stainless steel construction
3. Spring loaded cradle expands and contracts for perfect fit of your device
4. Rubber coated tips will hold device firm and stable
5. Socket technology allows for multiple adjustment angles and articulation of device
6. Includes Tether for open cockpit and extreme environments
7. Lifetime warranty
8. Made in U.S.A.
Material:
Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
|
61.73 |
|
|
ShadeFin with White Fabric, Case & Fixed Rod Holder Mount Kit
Add an extra layer of sun protection with ShadeFin by TACO Marine that easily attaches into rod holders, tops and arches for convenient, portable shade for almost any boat.
ShadeFin’s ocean-inspired design provides expanded shade coverage for multiple areas of the boat, including fore, aft and sides of tops or anywhere there is a rod holder. ShadeFin’s fabric provides an excellent UPF 50+ rating of sun protection while boating and fishing, or when relaxing at the dock and sand bar. To anticipate the needs of many boaters, ShadeFin is available with either a fixed or adjustable rod holder mount, which inserts into any standard rod holder, or with a clamp-on mount for pipe or tube.
ShadeFin’s body houses the ribs and material, and is offered in all black or white. A protective mesh storage sleeve comes standard with the ShadeFin. To operate ShadeFin, remove the sleeve, mount to a desired location onboard and activate the underside release tabs. Structural ribs attached to weather-resistant sun-protecting fabric expand out from the body to lock the fin in place. ShadeFin is lightweight, portable and requires no drilling.
Features:
Light, compact and portable
Easily mounts into any standard rod holder
Kit comes with a Fixed Rod Holder Mount
Adjustable Rod Holder Mount options available
Clamp-on mounting options available for 3/4”, 1” schedule-40 Pipe and 1-1/4” O.D. tube
Large coverage area of 5’ X 6’
UPF (Ultraviolet Protection Factor) rating of 50+ (“Excellent” rating)
Made of high-quality anodized aluminum parts
|
1679.99 |
|
|
ShadeFin with Black Fabric, Case & Fixed Rod Holder Mount Kit
Add an extra layer of sun protection with ShadeFin by TACO Marine that easily attaches into rod holders, tops and arches for convenient, portable shade for almost any boat.
ShadeFin’s ocean-inspired design provides expanded shade coverage for multiple areas of the boat, including fore, aft and sides of tops or anywhere there is a rod holder. ShadeFin’s fabric provides an excellent UPF 50+ rating of sun protection while boating and fishing, or when relaxing at the dock and sand bar. To anticipate the needs of many boaters, ShadeFin is available with either a fixed or adjustable rod holder mount, which inserts into any standard rod holder, or with a clamp-on mount for pipe or tube.
ShadeFin’s body houses the ribs and material, and is offered in all black or white. A protective mesh storage sleeve comes standard with the ShadeFin. To operate ShadeFin, remove the sleeve, mount to a desired location onboard and activate the underside release tabs. Structural ribs attached to weather-resistant sun-protecting fabric expand out from the body to lock the fin in place. ShadeFin is lightweight, portable and requires no drilling.
Features:
Light, compact and portable
Easily mounts into any standard rod holder
Kit comes with a Fixed Rod Holder Mount
Adjustable Rod Holder Mount options available
Clamp-on mounting options available for 3/4”, 1” schedule-40 Pipe and 1-1/4” O.D. tube
Large coverage area of 5’ X 6’
UPF (Ultraviolet Protection Factor) rating of 50+ (“Excellent” rating)
Made of high-quality anodized aluminum parts
|
1679.99 |
|
|
Teak Brew Cup/K-Cup Holder
Features:
6-3/4"W x 13"H x 5/8"D
Designed to store K-cup style brew cups
Holds 18 brew cups
Wall mount
|
42.84 |
|
|
RAM Level Cup™ XL with Torque™ 3/4" – 1" Diameter Rail Base and Short Arm
Designed for bigger insulated cups, plastic water bottles or even your reliable steel coffee cup, the Level Cup XL keeps your drink upright, regardless of the conditions. This kit includes a short arm and a Torque™ base that accommodates round rails from .5” through 1”. The oversized opening cradles the biggest of gulps and the adjustable bottom piece moves up and down to accommodate taller cups. The rubber feet flex to fit various sized cups as well. RAM® Mounts has refined the self-leveling action to keep your cups full.
Common Beverage Sizes:
- 12oz Cans
- Water Bottles
- Insulated Cups
- 32oz Containers (Nalgene, Pelican, Contingo, Hydro Flask)
Compatible Dimensions:
Width Range: 2.6" - 3.5"
Height Range: 3.75" - 11"
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
57.44 |
|