|
5" Extruded Aluminum Tough-Track™
With the RAM Tough-Track™, flat surface mounting possibilities are nearly endless for ATVs, cars, combines, motorboats, tractors, trucks and more. The extruded aluminum version of the RAM Tough-Track can be drilled to any flat surface and is designed for use with #8 screws for easy installation – hardware not included. Made to be a dependable and rugged mounting solution, the anodized aluminum provides a smooth slide across the track and anti-corrosion protection.
The RAM-TRACK-EXA-5U features 5” of usable track length, while the included top loading end caps add about 1.5” in length each. Using the end caps allows for two installation options: either use both top loading end caps to create insertion points on both ends of the track, or use one top loading end cap and close the opposite end with the included flush end cap.
The Extruded Aluminum Tough-Track is compatible with the RAM Center Loader and 90 Degree Connector, as well as a wide variety of RAM track bases to attach devices like action cameras, fishing rods, phones and tablets.
Material:
Marine-grade aluminum and high-strength composite
Note:
Part number reflects product packaged in clear bag polybag.
Weight:
0.21 lbs.
|
14.82 |
|
|
Center Loader for Top-Loading Aluminum Tough-Track™
The Center Loader allows for the connection of two Extruded Aluminum Tough-Track™ systems in a straight line and provides a loading point to insert track bases. Hardware not included.
Material:
High-strength composite
Note:
Part number reflects product packaged in clear polybag.
|
3.14 |
|
|
17" Extruded Aluminum Tough-Track™
With the RAM Tough-Track™, flat surface mounting possibilities are nearly endless for ATVs, cars, combines, motorboats, tractors, trucks and more. The extruded aluminum version of the RAM Tough-Track can be drilled to any flat surface and is designed for use with #8 screws for easy installation – hardware not included. Made to be a dependable and rugged mounting solution, the anodized aluminum provides a smooth slide across the track and anti-corrosion protection.
The RAM-TRACK-EXA-17U features 17” of usable track length, while the included top loading end caps add about 1.5” in length each. Using the end caps allows for two installation options: either use both top loading end caps to create insertion points on both ends of the track, or use one top loading end cap and close the opposite end with the included flush end cap.
The Extruded Aluminum Tough-Track is compatible with the RAM Center Loader and 90 Degree Connector, as well as a wide variety of RAM track bases to attach devices like action cameras, fishing rods, phones and tablets.
Material:
Marine-grade aluminum and high-strength composite
Note:
Part number reflects product packaged in clear polybag.
Weight:
0.42 lbs.
|
26.38 |
|
|
13" Extruded Aluminum Tough-Track™
With the RAM Tough-Track™, flat surface mounting possibilities are nearly endless for ATVs, cars, combines, motorboats, tractors, trucks and more. The extruded aluminum version of the RAM Tough-Track can be drilled to any flat surface and is designed for use with #8 screws for easy installation – hardware not included. Made to be a dependable and rugged mounting solution, the anodized aluminum provides a smooth slide across the track and anti-corrosion protection.
The RAM-TRACK-EXA-13U features 13” of usable track length, while the included top loading end caps add about 1.5” in length each. Using the end caps allows for two installation options: either use both top loading end caps to create insertion points on both ends of the track, or use one top loading end cap and close the opposite end with the included flush end cap.
The Extruded Aluminum Tough-Track is compatible with the RAM Center Loader and 90 Degree Connector, as well as a wide variety of RAM track bases to attach devices like action cameras, fishing rods, phones and tablets.
Material:
Marine-grade aluminum and high-strength composite
Note:
Part number reflects product packaged in clear polybag.
Weight:
0.36 lbs.
|
22.19 |
|
|
3" Extruded Aluminum Tough-Track™
With the RAM Tough-Track™, flat surface mounting possibilities are nearly endless for ATVs, cars, combines, motorboats, tractors, trucks and more. The extruded aluminum version of the RAM Tough-Track can be drilled to any flat surface and is designed for use with #8 screws for easy installation – hardware not included. Made to be a dependable and rugged mounting solution, the anodized aluminum provides a smooth slide across the track and anti-corrosion protection.
The RAM-TRACK-EXA-3U features 3” of usable track length, while the included top loading end caps add about 1.5” in length each. Using the end caps allows for two installation options: either use both top loading end caps to create insertion points on both ends of the track, or use one top loading end cap and close the opposite end with the included flush end cap.
The Extruded Aluminum Tough-Track is compatible with the RAM Center Loader and 90 Degree Connector, as well as a wide variety of RAM track bases to attach devices like action cameras, fishing rods, phones and tablets.
Material:
Marine-grade aluminum and high-strength composite
Note:
Part number reflects product packaged in clear polybag.
Weight:
0.17 lbs.
|
13.04 |
|
|
9" Extruded Aluminum Tough-Track™
With the RAM Tough-Track™, flat surface mounting possibilities are nearly endless for ATVs, cars, combines, motorboats, tractors, trucks and more. The extruded aluminum version of the RAM Tough-Track can be drilled to any flat surface and is designed for use with #8 screws for easy installation – hardware not included. Made to be a dependable and rugged mounting solution, the anodized aluminum provides a smooth slide across the track and anti-corrosion protection.
The RAM-TRACK-EXA-9 features 9” of usable track length, while the included top loading end caps add about 1.5” in length each. Using the end caps allows for two installation options: either use both top loading end caps to create insertion points on both ends of the track, or use one top loading end cap and close the opposite end with the included flush end cap.
The Extruded Aluminum Tough-Track is compatible with the RAM Center Loader and 90 Degree Connector, as well as a wide variety of RAM track bases to attach devices like action cameras, fishing rods, phones and tablets.
Material:
Marine-grade aluminum and high-strength composite
Note:
Part number reflects product packaged in clear polybag.
Weight:
0.28 lbs.
|
18.92 |
|
|
Ram Mounts
Looking for all the Ram Mount products we carry them. You can find them all right here in our Ram Mount Store Aqua Box Mount section. With everything from camera mounts to vehicle mounts including cell phone mounts, you will have plenty of choices to consider and options to choose from. Ram Mounting Systems is a quality manufacturer of all kinds of different mounts for your watercraft. You can get cell phone mounts and drink cup mounts here, along with GPS mounts and fishing rod holders. There are even iPad/iPhone/iPod mounts so you do not have to worry about having your electronics safe but close at hand.
If you have a kayak we have kayak mounts, too, and you can even do some work or surf the internet with laptop mounts to choose from. Of course, you want to make sure you choose a good marine electronics mount for your equipment, so you do not risk losing anything vital. Tablet mounts, swing arm mounts, surface mounts, and suction cup mounts are all available, and we have seat mounts, as well. You can even choose from motorcycle mounts, and rail/handle bar mounts to ensure you have everything you need your all of your future adventures.
|
|
|
Quick Release Rail Mount
1.5" Universal Quick Release Track Rail Adapter
|
20.41 |
|
|
C Size 1.5" Fishfinder Ball Adapter for the Lowrance Hook2 Series
Designed for light duty use, this C size (1.5”) ball base kit for the Lowrance Hook² allows users to swap out the factory mounting solution with a RAM® Mounts solution. Simply attach the included adapter to the Lowrance Hook² and you’re ready to connect to a variety of compatible RAM mounting solutions. Made of high strength composite and powder coated marine grade aluminum, this kit is designed to keep your Hook² secure and stable in rugged environments on your boat, kayak or inflatable.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
|
18.88 |
|
|
Double Ball Mount with Backing Plate
This mount consists of a double socket arm, two 2.5" diameter round bases that contain the universal AMPS hole pattern, a 2.10" x 2.60" backing plate, and mounting hardware. The mount is designed with a 1" diameter rubber ball and socket system that features adjustment points at both ends of the double socket arm, allowing for near-infinite adjustability for ideal viewing angles.
Features:
2.10 in. x 2.60 in. steel backing plate attaches to a variety of RAM® Mounts ball bases
2.5 in. round plate with a B-size 1 in. RAM® rubber ball connects to RAM® device holders containing the universal AMPS hole pattern; includes a B-size medium-length double socket arm
Made of stainless steel and high-strength composites for durability and reliability in the most demanding environments
Backed by a lifetime warranty
Specifications:
Hardware Included: (1) 2.10" x 2.60" Steel Backing Plate, (4) #8-32 x 1" Screws, (4) #8 Split Lock Washers, and (4) #8 Flat Washers
Product Dimensions (inch): Overall Height: 5"
Socket to Socket Length (inch): 3”
Hole Pattern (inch): 4-Hole AMPS: 1.181" x 1.496", 3-Hole 120-Degree: 1.812" Diameter
Plate Size (inch): 2.5" Diameter, 3" x 3" Square Plate
Ball Size (inch): B size (1”)
Weight Capacity: The standard use is 2 lbs. and the heavy-duty use is 1 lb.
Materials: Marine-grade aluminum and stainless steel
Weight: 0.79 lb.
|
33.95 |
|
|
C Size 1.5" Fishfinder Mount for the Lowrance Hook2 Series
Designed for heavy duty fresh water use, this C size (1.5”) aluminum drill-down kit for the Lowrance Hook² allows users to swap out the factory mounting solution with a RAM® Mounts solution. Simply attach the included adapter to the Lowrance Hook² and you’re ready to connect the double socket arm and round base featuring the AMPS hole pattern. Made of high strength composite and powder coated marine grade aluminum, this kit is designed to keep your Hook² secure and stable in rugged environments on your boat, kayak or inflatable.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
|
51.67 |
|
|
C Size 1.5" Fishfinder Mount for the Lowrance Hook2 Series
Designed for heavy duty fresh water use, this C size (1.5”) aluminum drill-down kit for the Lowrance Hook² allows users to swap out the factory mounting solution with a RAM® Mounts solution. Simply attach the included adapter to the Lowrance Hook² and you’re ready to connect the double socket arm and round base featuring the AMPS hole pattern. Made of high strength composite and powder coated marine grade aluminum, this kit is designed to keep your Hook² secure and stable in rugged environments on your boat, kayak or inflatable.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
|
42.94 |
|
|
RAM® Track Ball™ Heavy Duty Mount for weBoost
This weBoost mounting kit includes a 3/8"-24 X .375" threaded RAM® Tough-Ball™ that screws directly into the weBoost antenna, a C size medium length socket arm, and a C size RAM® Track Ball™ to mount to a third party track system or any RAM® Tough-Track™ system. The adjustability of the RAM® Mounts system allows you to collapse the antenna while not in use, as well as extend the reach of the weBoost antenna is mounted in a tight space. This weBoost antenna mount is compatible with all weBoost vehicle antennas including the Drive Reach OTR, RV, and Drive X RV antennas making this the ideal mounting solution for off-road vehicles and semi-trucks.
Features:
Kit includes 3/8"-24 X .375" Threaded RAM® Tough-Ball™ that screws into thread adapter of the weBoost antenna, C size medium length socket arm, and C size RAM® Track Ball™ to mount to a third party track system or any RAM® Tough-Track™ system
The adjustability of the ball and socket technology allows the weBoost mount to collapse when not in use, and provide extended reach in tight mounting areas
Made of powder-coated, marine-grade aluminum for durability and reliability in the most demanding environments
Backed by a lifetime warranty
Specifications:
HARDWARE INCLUDED: (1) Friction Washer, (1) 1/4"-20 x 7/8" T-Bolt,
T-BOLT DIMENSIONS: .48" x .95"
THREAD PITCH: 3/8"-24 X .375"
BALL/SOCKET SIZE: C Size (1.5")
WEIGHT CAPACITY: Standard Use: 4 lbs, Heavy-Duty Use: 3 lbs
MATERIALS: Marine-grade aluminum, High strength composite
|
48.73 |
|
|
Fishfinder Mount for Lowrance Hook2 Series - 1" Track Mount
Designed for light duty fresh water use, this B size (1”) Track Ball™ kit for the Lowrance Hook² allows users to swap out the factory mounting solution with a RAM® Mounts solution. Simply attach the included adapter to the Lowrance Hook² and you’re ready to connect the double socket arm and base to virtually any track system including the RAM® Tough-Track™. Made of high strength composite and powder coated marine grade aluminum, this kit is designed to keep your Hook² secure and stable in rugged environments on your kayak or inflatable.
T-Bolt Dimensions:
.48" x .95"
Material:
High Strength Composite and Marine Grade Aluminum
Ball Size:
1" Rubber Ball Size
Note:
Part number reflects product packaged in a retail bag store shelf display.
|
34.94 |
|
|
RAM® Tough-Clip™ Paddle Cradle with Track and Drill-Down Mounting Hardware
The RAM Tough-Clip™ Paddle Cradle allows you to mount a paddle to your canoe, kayak or paddle board. With its universal design, the Tough-Clip™ will hold most paddles with a handle of 1”-1.31” in circumference. This kit includes hardware and instructions for both a drill-down installation option and a track mounting option that’s compatible with the RAM Tough-Track™.
Material:
High Strength Composite
Note:
Part number reflects product packaged in retail bag for store shelf display.
|
16.76 |
|