Double U-Bolt Base w/D Size 2.25" Ball for Rails from 1" to 1.25" in Diameter The RAM-D-235U consists of a double u-bolt base with 2.25" diameter ball and two stainless steel u-bolts. The double u-bolt base will accommodate rails from 0.75" to 1.25" in diameter. HARDWARE INCLUDED (2) 1/4"-20 U-Bolts for 1" - 1.25" Rails (4) 1/4"-20 Nylock Nuts (4) Rubber Caps CLAMP RANGE 1" - 1.25" diameter BALL SIZE D Size (2.25") WEIGHT CAPACITY Standard Use: 6 lbs Heavy-Duty Use: 5 lbs Note: The "U" in the part number reflects product packaged in poly bag. This mount includes stainless steel u-bolts for preventing rust of the mount and black cover caps to be placed over the exposed ends of the u-bolt. Weight: 0.86 lbs

Double U-Bolt Base with D Size 2.25" Ball for Rails from 1.25" - 1.5" in Diameter The RAM-D-235-1U consists of a double u-bolt base with 2.25" diameter ball and two zinc-coated u-bolts. The double u-bolt base will accommodate rails from 1.25" to 1.5" in diameter. Features: Material: Powder Coated Marine Grade Aluminum Ball Size: 2.25" D-Size Ball Note: The "U" in the part number reflects product packaged in poly bag. This mount includes zinc coated u-bolts for preventing rust of the mount and black cover caps to be placed over the exposed ends of the u-bolt. Weight: 0.54 lbs.

50mm x 100mm Half VESA Plate Adapter with D Size 2.25" Ball The RAM-D-243U consists of a 2.25" diameter rubber ball, connected at right angles to a square 2.81" x 5" plate. Features: Material: Powder Coated Marine Grade Aluminum Ball Size: 2.25" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag. Weight: 0.8 lbs.

RAM Stainless Steel Double U-Bolt Base with 1.5" Ball for Rails from 1" to 1.25" in Diameter The RAM-235U consists of a stainless steel double u-bolt base connected to a 1.5" diameter ball. The double u-bolt base will accommodate rails from 1" to 1.25" in diameter. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag. This mount includes stainless steel u-bolts for preventing rust of the mount and black cover caps to be placed over the exposed ends of the u-bolt.

Forklift Overhead Guard Plate with D Size 2.25" Ball Sometimes the simplest solution makes the most sense. The new RAM Lift Truck Back-Up Mounting Plate is the ideal way to get a RAM ball attached to most any lift cage or overhead guard. Utilizing two identical plates of stamped steel with numerous common hole patterns and slots makes attachment a breeze. Three popular ball sizes: 1.5", 2.25 & 3.68" diameter may be attached to this plate system. Up to 2 balls may be attached to the same plate for multiple applications. Features: Hole Patterns: AMPS 4-Hole Pattern 100 x 100 VESA Pattern 75 x 75 VESA Pattern Installation is as easy as attaching the base with ball to one of the plates and then sandwiching the guard or cage between the two mounting plates using the hardware provided. Material: Powder Coated Marine Grade Aluminum Weight: 8.6 lbs.

D Size 2.25" Ball Mount with 2 qty 3.68" Round Plates & Short Length Double Socket Arm The RAM-D-101U consists of (2 qty) 3.68" diameter round bases and SHORT length double socket arm. The 3.68" diameter round bases have pre-drilled holes, including two holes at 180 degrees and three holes at 120 degrees. Designed into the mount is a 2.25" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm.  Specifications: Material: Powder Coated Marine Grade Aluminum Ball Size: 2.25" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag. Weight: 3.0 lbs.

Double U-Bolt Base w/1" Ball f/Rails from 0.75" to 1.25" Diameter The RAM-B-235U consists of a double u-bolt base with 1" diameter ball and two stainless steel u-bolts. The double u-bolt base will accommodate rails from 0.75" to 1.25" in diameter.

D Size 2.25" Ball Mount with 2 - 3.68" Round Plate & Medium Length Double Socket Arm The RAM-D-101U consists of (2 qty) 3.68" diameter round bases and STANDARD length double socket arm. The 3.68" diameter round bases have pre-drilled holes, including two holes at 180 degrees and three holes at 120 degrees. Designed into the mount is a 2.25" diameter rubber ball and socket system with adjustment points at both socket ends of the arm. Weight Capacity: Up to 15 lbs. Ball Size: 2.25" Rubber Ball Size Material: Powder Coated Marine Grade Aluminum Note: The "U" in the part number reflects product packaged in poly bag. Weight: 3.95 lbs.

D Size 2.25" Ball on Round Plate with AMPS Hole Pattern The RAM-D-254U consists of a 2.25" diameter rubber ball, connected at right angles to a 2.4375" diameter round plate. The plate has pre-drilled holes in the base plate, including two holes at 180 degrees. Features: Material: Powder Coated Marine Grade Aluminum Ball Size: 2.25" Rubber Ball "D" Size Note: The "U" in the part number reflects product packaged in poly bag Weight: 0.6 lbs.

D Size 2.25" Ball Mount w/11" X 3" Rectangle Plate, 3.68" Round Plate and Hi-Torq™ Wrench The RAM-D-111U-C consists of a short double socket arm, 3.68" diameter round base and 11" x 3" rectangular base. The round base contains pre-drilled holes, including two holes at 180 degrees and three holes at 120 degrees. The rectangle base contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more. The RAM-D-111U-C is Compatible With: Garmin Fishfinders and GPS Chartplotters Humminbird Fishfinders and GPS Chartplotters Lowrance Fishfinders and GPS Chartplotters Raymarine Fishfinders and GPS Chartplotters Overall Height: 8.125" Weight Capacity: Up to 15 lbs. Weight: 3.45 lbs. Material: Powder Coated Marine Grade Aluminum Ball Size: 2.25" Rubber "D" Ball Size Hi-Torq™ Wrench The RAM handle wrench is designed to be used with the knob found on "D" size ball arms and mounts. The wrench matches the shape of the knob found on the side of "D" arms, and lets you give the arm an extra tight grip. This wrench was originally made for the military when using the RAM mounts in cold weather, and the knob could not be tightened by hand.

RAM Stainless Steel U-Bolt Base w/1" Ball The RAM motorcycle handlebar base contains a 1" rubber ball designed to sit at right angles to the mounting rail. The rust proof metal u-bolt accommodates rails in diameter from 1" to 1.25" in diameter. The base also includes black cover caps to be placed over the exposed ends of the u-bolt. U-Bolt Dimensions: Accommodates rails from 1" to 1.25" in diameter. Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag. If you prefer the RAM (RAM-B-231ZU) zinc coated u-bolt motorcycle handlebar base, click here.

RAM 1.5" Rail Mount with Double U-Bolt Base & 3.625" Square Base (VESA 75mm X 75mm Hole Pattern) The RAM-334-1U consists of a double socket arm, 3.625" square base with the VESA hole pattern and stainless steel double u-bolt base that will fit pipes from 0.75" to 1" in diameter. The VESA base contains a 75mm X 75mm hole pattern. Designed into the mount is a 1.5" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. U-Bolt Dimensions: Accommodates rails from 0.75" to 1" in diameter. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM 1.5" Rail Mount w/Double U-Bolt Base & 3.625" Square Base (VESA 75mm x 75mm Hole Pattern) The RAM-334U consists of a double socket arm, 3.625" square plate with a 75mm X 75mm VESA hole pattern and stainless steel double u-bolt base that will fit pipes from 1" to 1.25" in diameter. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. Material: Powder Coated Marine Grade Aluminum U-Bolt Dimensions: Accommodates rails from 1" to 1.25" in diameter. Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM Rail Base with Zinc Coated U-Bolt & 1.5" Ball for Rails from 0.5" to 1" in Diameter The RAM motorcycle handlebar base contains a 1.5" rubber ball designed to sit at right angles to the mounting rail. The zinc coated u-bolt accommodates rails in diameter from 0.5" to 1" in diameter. Included are black cover caps to be placed over the exposed ends of the u-bolt and a composite adapter that can narrow the rail to a minimum width of 0.5". U-Bolt Dimensions: Accommodates rails from 0.5" to 1" in diameter. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

Double U-Bolt Bolster Bracket - 8-3/4" Mounting bunk boards using double U-bolt bolster brackets provides the most rigid bolt-on bracket mounting possible. Made from heavy 7 ga galvanized steel, these brackets are 4” wide with slots that are 1/2” wide spaced 1-3/4” apart with a top hole diameter of 1/2”.